config root man

Notes:

NONE CIPHER:
  To use the NONE option you must have the NoneEnabled switch set on the server
  and you MUST have *both* NoneEnabled and NoneSwitch set to yes on the client.
  The NONE feature works with ALL ssh subsystems (as far as we can tell)
  as long as there is no tty allocated.
  If a user uses the -T switch to prevent a tty being created the NONE cipher
  will be disabled. 


PERFORMANCE:
  The performance increase will only be as good as the network and TCP stack
  tuning on the reciever side of the connection allows.  As a rule of thumb a
  user will need at least 10Mb/s connection with a 100ms RTT to see a doubling
  of performance.
  The HPN-SSH home page  http://www.psc.edu/networking/projects/hpn-ssh
  describes this in greater detail. 


BUFFER SIZES:
- if HPN is disabled the receive buffer size will be set to the OpenSSH default
  of 64K.

- if a HPN system connects to a non-HPN system the receive buffer will
  be set to the HPNBufferSize value. The default is 2MB but user adjustable.

- If a HPN to HPN connection is established a number of different things might
  happen based on the user options and conditions. 

  Conditions: HPNBufferSize NOT Set, TCPRcvBufPoll enabled, TCPRcvBuf NOT Set 
  Result: HPN Buffer Size = up to 64MB 
    This is the default state.  The HPN buffer size will grow to a maximum of
    64MB as the TCP receive buffer grows.  The maximum HPN Buffer size of 64MB
    is geared towards 10GigE transcontinental connections. 

  Conditions: HPNBufferSize NOT Set, TCPRcvBufPoll disabled, TCPRcvBuf NOT Set
  Result: HPN Buffer Size = TCP receive buffer value. 
    Users on non-autotuning systesm should disable TCPRcvBufPoll in the 
    ssh_cofig and sshd_config

  Conditions: HPNBufferSize SET, TCPRcvBufPoll disabled, TCPRcvBuf NOT Set
  Result: HPN Buffer Size = minmum of TCP receive buffer and HPNBufferSize. 
    This would be the system defined TCP receive buffer (RWIN).

  Conditions: HPNBufferSize SET, TCPRcvBufPoll disabled, TCPRcvBuf SET
  Result: HPN Buffer Size = minmum of TCPRcvBuf and HPNBufferSize. 
    Generally there is no need to set both.

  Conditions: HPNBufferSize SET, TCPRcvBufPoll enabled, TCPRcvBuf NOT Set
  Result: HPN Buffer Size = grows to HPNBufferSize
    The buffer will grow up to the maximum size specified here. 

  Conditions: HPNBufferSize SET, TCPRcvBufPoll enabled, TCPRcvBuf SET
  Result: HPN Buffer Size = minmum of TCPRcvBuf and HPNBufferSize. 
    Generally there is no need to set both of these, especially on autotuning 
    systems. However, if the users wishes to override the autotuning this would
    be one way to do it.

  Conditions: HPNBufferSize NOT Set, TCPRcvBufPoll enabled, TCPRcvBuf SET
  Result: HPN Buffer Size = TCPRcvBuf. 
   This will override autotuning and set the TCP recieve buffer to the user
   defined value.


HPN SPECIFIC CONFIGURATION OPTIONS:

- HPNDisabled=[yes/no] client/server
  In some situations, such as transfers on a local area network, the impact 
  of the HPN code produces a net decrease in performance.  In these cases it is 
  helpful to disable the HPN functionality. By default HPNDisabled is set to no. 

- HPNBufferSize=[int]KB client/server
  This is the default buffer size the HPN functionality uses when interacting
  with non-HPN SSH installations.  Conceptually this is similar to the TcpRcvBuf
  option as applied to the internal SSH flow control.  This value can range from 
  1KB to 64MB (1-65536).  Use of oversized or undersized buffers can cause
  performance problems depending on the roud trip time of the network path.
  The default size of this buffer is 2MB.

- TcpRcvBufPoll=[yes/no] client/server
  Enable or disable the polling of the TCP receive buffer through the life 
  of the connection.  You would want to make sure that this option is enabled 
  for systems making use of autotuning kernels (linux 2.4.24+, 2.6, MS Vista,
  FreeBSD 7.x and later). Default is yes.

- TcpRcvBuf=[int]KB client
  Set the TCP socket receive buffer to n Kilobytes.  It can be set up to the 
  maximum socket size allowed by the system.  This is useful in situations where 
  the TCP receive window is set low but the maximum buffer size is set higher
  (as is typical).  This works on a per TCP connection basis.  You can also use
  this to artifically limit the transfer rate of the connection.  In these cases
  the throughput will be no more than n/RTT.  The minimum buffer size is 1KB. 
  Default is the current system wide TCP receive buffer size.

- NoneEnabled=[yes/no] client/server
  Enable or disable the use of the None cipher.  Care must always be used when
  enabling this as it will allow users to send data in the clear.  However, it
  is important to note that authentication information remains encrypted even
  if this option is enabled.  Set to no by default.

- NoneSwitch=[yes/no] client
  Switch the encryption cipher being used to the None cipher after
  authentication takes place.  NoneEnabled must be enabled on both the client
  and server side of the connection.  When the connection switches to the NONE
  cipher a warning is sent to STDERR.  The connection attempt will fail with an
  error if a client requests a NoneSwitch from the server that does not
  explicitly have NoneEnabled set to yes.
  Note: The NONE cipher cannot be used in interactive (shell) sessions and it
  will fail silently.  Set to no by default.


CREDITS:

  This patch was conceived, designed, and led by Chris Rapier (rapier@psc.edu)
  The majority of the actual coding for versions up to HPN12v1 was performed
  by Michael Stevens (mstevens@andrew.cmu.edu).
  The MT-AES-CTR cipher was implemented by Ben Bennet (ben@psc.edu).
  This work was financed, in part, by Cisco System, Inc., the National Library
  of Medicine, and the National Science Foundation.