| Current Path : /usr/src/crypto/openssl/crypto/bn/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //usr/src/crypto/openssl/crypto/bn/bn_mont.c |
/* crypto/bn/bn_mont.c */
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
/* ====================================================================
* Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
/*
* Details about Montgomery multiplication algorithms can be found at
* http://security.ece.orst.edu/publications.html, e.g.
* http://security.ece.orst.edu/koc/papers/j37acmon.pdf and
* sections 3.8 and 4.2 in http://security.ece.orst.edu/koc/papers/r01rsasw.pdf
*/
#include <stdio.h>
#include "cryptlib.h"
#include "bn_lcl.h"
#define MONT_WORD /* use the faster word-based algorithm */
#if defined(MONT_WORD) && defined(OPENSSL_BN_ASM_MONT) && (BN_BITS2<=32)
/* This condition means we have a specific non-default build:
* In the 0.9.8 branch, OPENSSL_BN_ASM_MONT is normally not set for any
* BN_BITS2<=32 platform; an explicit "enable-montasm" is required.
* I.e., if we are here, the user intentionally deviates from the
* normal stable build to get better Montgomery performance from
* the 0.9.9-dev backport.
*
* In this case only, we also enable BN_from_montgomery_word()
* (another non-stable feature from 0.9.9-dev).
*/
#define MONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD
#endif
#ifdef MONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD
static int BN_from_montgomery_word(BIGNUM *ret, BIGNUM *r, BN_MONT_CTX *mont);
#endif
int BN_mod_mul_montgomery(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
BN_MONT_CTX *mont, BN_CTX *ctx)
{
BIGNUM *tmp;
int ret=0;
#if defined(OPENSSL_BN_ASM_MONT) && defined(MONT_WORD)
int num = mont->N.top;
if (num>1 && a->top==num && b->top==num)
{
if (bn_wexpand(r,num) == NULL) return(0);
#if 0 /* for OpenSSL 0.9.9 mont->n0 */
if (bn_mul_mont(r->d,a->d,b->d,mont->N.d,mont->n0,num))
#else
if (bn_mul_mont(r->d,a->d,b->d,mont->N.d,&mont->n0,num))
#endif
{
r->neg = a->neg^b->neg;
r->top = num;
bn_correct_top(r);
return(1);
}
}
#endif
BN_CTX_start(ctx);
tmp = BN_CTX_get(ctx);
if (tmp == NULL) goto err;
bn_check_top(tmp);
if (a == b)
{
if (!BN_sqr(tmp,a,ctx)) goto err;
}
else
{
if (!BN_mul(tmp,a,b,ctx)) goto err;
}
/* reduce from aRR to aR */
#ifdef MONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD
if (!BN_from_montgomery_word(r,tmp,mont)) goto err;
#else
if (!BN_from_montgomery(r,tmp,mont,ctx)) goto err;
#endif
bn_check_top(r);
ret=1;
err:
BN_CTX_end(ctx);
return(ret);
}
#ifdef MONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD
static int BN_from_montgomery_word(BIGNUM *ret, BIGNUM *r, BN_MONT_CTX *mont)
{
BIGNUM *n;
BN_ULONG *ap,*np,*rp,n0,v,*nrp;
int al,nl,max,i,x,ri;
n= &(mont->N);
/* mont->ri is the size of mont->N in bits (rounded up
to the word size) */
al=ri=mont->ri/BN_BITS2;
nl=n->top;
if ((al == 0) || (nl == 0)) { ret->top=0; return(1); }
max=(nl+al+1); /* allow for overflow (no?) XXX */
if (bn_wexpand(r,max) == NULL) return(0);
r->neg^=n->neg;
np=n->d;
rp=r->d;
nrp= &(r->d[nl]);
/* clear the top words of T */
for (i=r->top; i<max; i++) /* memset? XXX */
r->d[i]=0;
r->top=max;
#if 0 /* for OpenSSL 0.9.9 mont->n0 */
n0=mont->n0[0];
#else
n0=mont->n0;
#endif
#ifdef BN_COUNT
fprintf(stderr,"word BN_from_montgomery_word %d * %d\n",nl,nl);
#endif
for (i=0; i<nl; i++)
{
#ifdef __TANDEM
{
long long t1;
long long t2;
long long t3;
t1 = rp[0] * (n0 & 0177777);
t2 = 037777600000l;
t2 = n0 & t2;
t3 = rp[0] & 0177777;
t2 = (t3 * t2) & BN_MASK2;
t1 = t1 + t2;
v=bn_mul_add_words(rp,np,nl,(BN_ULONG) t1);
}
#else
v=bn_mul_add_words(rp,np,nl,(rp[0]*n0)&BN_MASK2);
#endif
nrp++;
rp++;
if (((nrp[-1]+=v)&BN_MASK2) >= v)
continue;
else
{
if (((++nrp[0])&BN_MASK2) != 0) continue;
if (((++nrp[1])&BN_MASK2) != 0) continue;
for (x=2; (((++nrp[x])&BN_MASK2) == 0); x++) ;
}
}
bn_correct_top(r);
/* mont->ri will be a multiple of the word size and below code
* is kind of BN_rshift(ret,r,mont->ri) equivalent */
if (r->top <= ri)
{
ret->top=0;
return(1);
}
al=r->top-ri;
if (bn_wexpand(ret,ri) == NULL) return(0);
x=0-(((al-ri)>>(sizeof(al)*8-1))&1);
ret->top=x=(ri&~x)|(al&x); /* min(ri,al) */
ret->neg=r->neg;
rp=ret->d;
ap=&(r->d[ri]);
{
size_t m1,m2;
v=bn_sub_words(rp,ap,np,ri);
/* this ----------------^^ works even in al<ri case
* thanks to zealous zeroing of top of the vector in the
* beginning. */
/* if (al==ri && !v) || al>ri) nrp=rp; else nrp=ap; */
/* in other words if subtraction result is real, then
* trick unconditional memcpy below to perform in-place
* "refresh" instead of actual copy. */
m1=0-(size_t)(((al-ri)>>(sizeof(al)*8-1))&1); /* al<ri */
m2=0-(size_t)(((ri-al)>>(sizeof(al)*8-1))&1); /* al>ri */
m1|=m2; /* (al!=ri) */
m1|=(0-(size_t)v); /* (al!=ri || v) */
m1&=~m2; /* (al!=ri || v) && !al>ri */
nrp=(BN_ULONG *)(((size_t)rp&~m1)|((size_t)ap&m1));
}
/* 'i<ri' is chosen to eliminate dependency on input data, even
* though it results in redundant copy in al<ri case. */
for (i=0,ri-=4; i<ri; i+=4)
{
BN_ULONG t1,t2,t3,t4;
t1=nrp[i+0];
t2=nrp[i+1];
t3=nrp[i+2]; ap[i+0]=0;
t4=nrp[i+3]; ap[i+1]=0;
rp[i+0]=t1; ap[i+2]=0;
rp[i+1]=t2; ap[i+3]=0;
rp[i+2]=t3;
rp[i+3]=t4;
}
for (ri+=4; i<ri; i++)
rp[i]=nrp[i], ap[i]=0;
bn_correct_top(r);
bn_correct_top(ret);
bn_check_top(ret);
return(1);
}
int BN_from_montgomery(BIGNUM *ret, const BIGNUM *a, BN_MONT_CTX *mont,
BN_CTX *ctx)
{
int retn=0;
BIGNUM *t;
BN_CTX_start(ctx);
if ((t = BN_CTX_get(ctx)) && BN_copy(t,a))
retn = BN_from_montgomery_word(ret,t,mont);
BN_CTX_end(ctx);
return retn;
}
#else /* !MONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD */
int BN_from_montgomery(BIGNUM *ret, const BIGNUM *a, BN_MONT_CTX *mont,
BN_CTX *ctx)
{
int retn=0;
#ifdef MONT_WORD
BIGNUM *n,*r;
BN_ULONG *ap,*np,*rp,n0,v,*nrp;
int al,nl,max,i,x,ri;
BN_CTX_start(ctx);
if ((r = BN_CTX_get(ctx)) == NULL) goto err;
if (!BN_copy(r,a)) goto err;
n= &(mont->N);
ap=a->d;
/* mont->ri is the size of mont->N in bits (rounded up
to the word size) */
al=ri=mont->ri/BN_BITS2;
nl=n->top;
if ((al == 0) || (nl == 0)) { r->top=0; return(1); }
max=(nl+al+1); /* allow for overflow (no?) XXX */
if (bn_wexpand(r,max) == NULL) goto err;
r->neg=a->neg^n->neg;
np=n->d;
rp=r->d;
nrp= &(r->d[nl]);
/* clear the top words of T */
#if 1
for (i=r->top; i<max; i++) /* memset? XXX */
r->d[i]=0;
#else
memset(&(r->d[r->top]),0,(max-r->top)*sizeof(BN_ULONG));
#endif
r->top=max;
n0=mont->n0;
#ifdef BN_COUNT
fprintf(stderr,"word BN_from_montgomery %d * %d\n",nl,nl);
#endif
for (i=0; i<nl; i++)
{
#ifdef __TANDEM
{
long long t1;
long long t2;
long long t3;
t1 = rp[0] * (n0 & 0177777);
t2 = 037777600000l;
t2 = n0 & t2;
t3 = rp[0] & 0177777;
t2 = (t3 * t2) & BN_MASK2;
t1 = t1 + t2;
v=bn_mul_add_words(rp,np,nl,(BN_ULONG) t1);
}
#else
v=bn_mul_add_words(rp,np,nl,(rp[0]*n0)&BN_MASK2);
#endif
nrp++;
rp++;
if (((nrp[-1]+=v)&BN_MASK2) >= v)
continue;
else
{
if (((++nrp[0])&BN_MASK2) != 0) continue;
if (((++nrp[1])&BN_MASK2) != 0) continue;
for (x=2; (((++nrp[x])&BN_MASK2) == 0); x++) ;
}
}
bn_correct_top(r);
/* mont->ri will be a multiple of the word size and below code
* is kind of BN_rshift(ret,r,mont->ri) equivalent */
if (r->top <= ri)
{
ret->top=0;
retn=1;
goto err;
}
al=r->top-ri;
# define BRANCH_FREE 1
# if BRANCH_FREE
if (bn_wexpand(ret,ri) == NULL) goto err;
x=0-(((al-ri)>>(sizeof(al)*8-1))&1);
ret->top=x=(ri&~x)|(al&x); /* min(ri,al) */
ret->neg=r->neg;
rp=ret->d;
ap=&(r->d[ri]);
{
size_t m1,m2;
v=bn_sub_words(rp,ap,np,ri);
/* this ----------------^^ works even in al<ri case
* thanks to zealous zeroing of top of the vector in the
* beginning. */
/* if (al==ri && !v) || al>ri) nrp=rp; else nrp=ap; */
/* in other words if subtraction result is real, then
* trick unconditional memcpy below to perform in-place
* "refresh" instead of actual copy. */
m1=0-(size_t)(((al-ri)>>(sizeof(al)*8-1))&1); /* al<ri */
m2=0-(size_t)(((ri-al)>>(sizeof(al)*8-1))&1); /* al>ri */
m1|=m2; /* (al!=ri) */
m1|=(0-(size_t)v); /* (al!=ri || v) */
m1&=~m2; /* (al!=ri || v) && !al>ri */
nrp=(BN_ULONG *)(((size_t)rp&~m1)|((size_t)ap&m1));
}
/* 'i<ri' is chosen to eliminate dependency on input data, even
* though it results in redundant copy in al<ri case. */
for (i=0,ri-=4; i<ri; i+=4)
{
BN_ULONG t1,t2,t3,t4;
t1=nrp[i+0];
t2=nrp[i+1];
t3=nrp[i+2]; ap[i+0]=0;
t4=nrp[i+3]; ap[i+1]=0;
rp[i+0]=t1; ap[i+2]=0;
rp[i+1]=t2; ap[i+3]=0;
rp[i+2]=t3;
rp[i+3]=t4;
}
for (ri+=4; i<ri; i++)
rp[i]=nrp[i], ap[i]=0;
bn_correct_top(r);
bn_correct_top(ret);
# else
if (bn_wexpand(ret,al) == NULL) goto err;
ret->top=al;
ret->neg=r->neg;
rp=ret->d;
ap=&(r->d[ri]);
al-=4;
for (i=0; i<al; i+=4)
{
BN_ULONG t1,t2,t3,t4;
t1=ap[i+0];
t2=ap[i+1];
t3=ap[i+2];
t4=ap[i+3];
rp[i+0]=t1;
rp[i+1]=t2;
rp[i+2]=t3;
rp[i+3]=t4;
}
al+=4;
for (; i<al; i++)
rp[i]=ap[i];
# endif
#else /* !MONT_WORD */
BIGNUM *t1,*t2;
BN_CTX_start(ctx);
t1 = BN_CTX_get(ctx);
t2 = BN_CTX_get(ctx);
if (t1 == NULL || t2 == NULL) goto err;
if (!BN_copy(t1,a)) goto err;
BN_mask_bits(t1,mont->ri);
if (!BN_mul(t2,t1,&mont->Ni,ctx)) goto err;
BN_mask_bits(t2,mont->ri);
if (!BN_mul(t1,t2,&mont->N,ctx)) goto err;
if (!BN_add(t2,a,t1)) goto err;
if (!BN_rshift(ret,t2,mont->ri)) goto err;
#endif /* MONT_WORD */
#if !defined(BRANCH_FREE) || BRANCH_FREE==0
if (BN_ucmp(ret, &(mont->N)) >= 0)
{
if (!BN_usub(ret,ret,&(mont->N))) goto err;
}
#endif
retn=1;
bn_check_top(ret);
err:
BN_CTX_end(ctx);
return(retn);
}
#endif /* MONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD */
BN_MONT_CTX *BN_MONT_CTX_new(void)
{
BN_MONT_CTX *ret;
if ((ret=(BN_MONT_CTX *)OPENSSL_malloc(sizeof(BN_MONT_CTX))) == NULL)
return(NULL);
BN_MONT_CTX_init(ret);
ret->flags=BN_FLG_MALLOCED;
return(ret);
}
void BN_MONT_CTX_init(BN_MONT_CTX *ctx)
{
ctx->ri=0;
BN_init(&(ctx->RR));
BN_init(&(ctx->N));
BN_init(&(ctx->Ni));
#if 0 /* for OpenSSL 0.9.9 mont->n0 */
ctx->n0[0] = ctx->n0[1] = 0;
#else
ctx->n0 = 0;
#endif
ctx->flags=0;
}
void BN_MONT_CTX_free(BN_MONT_CTX *mont)
{
if(mont == NULL)
return;
BN_free(&(mont->RR));
BN_free(&(mont->N));
BN_free(&(mont->Ni));
if (mont->flags & BN_FLG_MALLOCED)
OPENSSL_free(mont);
}
int BN_MONT_CTX_set(BN_MONT_CTX *mont, const BIGNUM *mod, BN_CTX *ctx)
{
int ret = 0;
BIGNUM *Ri,*R;
BN_CTX_start(ctx);
if((Ri = BN_CTX_get(ctx)) == NULL) goto err;
R= &(mont->RR); /* grab RR as a temp */
if (!BN_copy(&(mont->N),mod)) goto err; /* Set N */
mont->N.neg = 0;
#ifdef MONT_WORD
{
BIGNUM tmod;
BN_ULONG buf[2];
mont->ri=(BN_num_bits(mod)+(BN_BITS2-1))/BN_BITS2*BN_BITS2;
BN_zero(R);
#if 0 /* for OpenSSL 0.9.9 mont->n0, would be "#if defined(OPENSSL_BN_ASM_MONT) && (BN_BITS2<=32)",
only certain BN_BITS2<=32 platforms actually need this */
if (!(BN_set_bit(R,2*BN_BITS2))) goto err; /* R */
#else
if (!(BN_set_bit(R,BN_BITS2))) goto err; /* R */
#endif
buf[0]=mod->d[0]; /* tmod = N mod word size */
buf[1]=0;
BN_init(&tmod);
tmod.d=buf;
tmod.top = buf[0] != 0 ? 1 : 0;
tmod.dmax=2;
tmod.neg=0;
#if 0 /* for OpenSSL 0.9.9 mont->n0, would be "#if defined(OPENSSL_BN_ASM_MONT) && (BN_BITS2<=32)";
only certain BN_BITS2<=32 platforms actually need this */
tmod.top=0;
if ((buf[0] = mod->d[0])) tmod.top=1;
if ((buf[1] = mod->top>1 ? mod->d[1] : 0)) tmod.top=2;
if ((BN_mod_inverse(Ri,R,&tmod,ctx)) == NULL)
goto err;
if (!BN_lshift(Ri,Ri,2*BN_BITS2)) goto err; /* R*Ri */
if (!BN_is_zero(Ri))
{
if (!BN_sub_word(Ri,1)) goto err;
}
else /* if N mod word size == 1 */
{
if (bn_expand(Ri,(int)sizeof(BN_ULONG)*2) == NULL)
goto err;
/* Ri-- (mod double word size) */
Ri->neg=0;
Ri->d[0]=BN_MASK2;
Ri->d[1]=BN_MASK2;
Ri->top=2;
}
if (!BN_div(Ri,NULL,Ri,&tmod,ctx)) goto err;
/* Ni = (R*Ri-1)/N,
* keep only couple of least significant words: */
mont->n0[0] = (Ri->top > 0) ? Ri->d[0] : 0;
mont->n0[1] = (Ri->top > 1) ? Ri->d[1] : 0;
#else
/* Ri = R^-1 mod N*/
if ((BN_mod_inverse(Ri,R,&tmod,ctx)) == NULL)
goto err;
if (!BN_lshift(Ri,Ri,BN_BITS2)) goto err; /* R*Ri */
if (!BN_is_zero(Ri))
{
if (!BN_sub_word(Ri,1)) goto err;
}
else /* if N mod word size == 1 */
{
if (!BN_set_word(Ri,BN_MASK2)) goto err; /* Ri-- (mod word size) */
}
if (!BN_div(Ri,NULL,Ri,&tmod,ctx)) goto err;
/* Ni = (R*Ri-1)/N,
* keep only least significant word: */
# if 0 /* for OpenSSL 0.9.9 mont->n0 */
mont->n0[0] = (Ri->top > 0) ? Ri->d[0] : 0;
mont->n0[1] = 0;
# else
mont->n0 = (Ri->top > 0) ? Ri->d[0] : 0;
# endif
#endif
}
#else /* !MONT_WORD */
{ /* bignum version */
mont->ri=BN_num_bits(&mont->N);
BN_zero(R);
if (!BN_set_bit(R,mont->ri)) goto err; /* R = 2^ri */
/* Ri = R^-1 mod N*/
if ((BN_mod_inverse(Ri,R,&mont->N,ctx)) == NULL)
goto err;
if (!BN_lshift(Ri,Ri,mont->ri)) goto err; /* R*Ri */
if (!BN_sub_word(Ri,1)) goto err;
/* Ni = (R*Ri-1) / N */
if (!BN_div(&(mont->Ni),NULL,Ri,&mont->N,ctx)) goto err;
}
#endif
/* setup RR for conversions */
BN_zero(&(mont->RR));
if (!BN_set_bit(&(mont->RR),mont->ri*2)) goto err;
if (!BN_mod(&(mont->RR),&(mont->RR),&(mont->N),ctx)) goto err;
ret = 1;
err:
BN_CTX_end(ctx);
return ret;
}
BN_MONT_CTX *BN_MONT_CTX_copy(BN_MONT_CTX *to, BN_MONT_CTX *from)
{
if (to == from) return(to);
if (!BN_copy(&(to->RR),&(from->RR))) return NULL;
if (!BN_copy(&(to->N),&(from->N))) return NULL;
if (!BN_copy(&(to->Ni),&(from->Ni))) return NULL;
to->ri=from->ri;
#if 0 /* for OpenSSL 0.9.9 mont->n0 */
to->n0[0]=from->n0[0];
to->n0[1]=from->n0[1];
#else
to->n0=from->n0;
#endif
return(to);
}
BN_MONT_CTX *BN_MONT_CTX_set_locked(BN_MONT_CTX **pmont, int lock,
const BIGNUM *mod, BN_CTX *ctx)
{
int got_write_lock = 0;
BN_MONT_CTX *ret;
CRYPTO_r_lock(lock);
if (!*pmont)
{
CRYPTO_r_unlock(lock);
CRYPTO_w_lock(lock);
got_write_lock = 1;
if (!*pmont)
{
ret = BN_MONT_CTX_new();
if (ret && !BN_MONT_CTX_set(ret, mod, ctx))
BN_MONT_CTX_free(ret);
else
*pmont = ret;
}
}
ret = *pmont;
if (got_write_lock)
CRYPTO_w_unlock(lock);
else
CRYPTO_r_unlock(lock);
return ret;
}