| Current Path : /usr/src/sys/boot/fdt/dts/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //usr/src/sys/boot/fdt/dts/db78100.dts |
/*
* Copyright (c) 2010 The FreeBSD Foundation
* All rights reserved.
*
* This software was developed by Semihalf under sponsorship from
* the FreeBSD Foundation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Marvell DB-78100 Device Tree Source.
*
* $FreeBSD: release/9.1.0/sys/boot/fdt/dts/db78100.dts 233015 2012-03-15 22:15:06Z raj $
*/
/dts-v1/;
/ {
model = "mrvl,DB-78100";
compatible = "DB-78100-BP", "DB-78100-BP-A";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
serial0 = &serial0;
serial1 = &serial1;
mpp = &MPP;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "ARM,88FR571";
reg = <0x0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x4000>; // L1, 16K
i-cache-size = <0x4000>; // L1, 16K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
memory {
device_type = "memory";
reg = <0x0 0x20000000>; // 512M at 0x0
};
localbus@f1000000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "mrvl,lbc";
win-count = <14>;
/* This reflects CPU decode windows setup. */
ranges = <0x0 0x0f 0xf9300000 0x00100000
0x1 0x1e 0xfa000000 0x00100000
0x2 0x1d 0xfa100000 0x02000000
0x3 0x1b 0xfc100000 0x00000400>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x00100000>;
bank-width = <2>;
device-width = <1>;
};
led@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "led";
reg = <0x1 0x0 0x00100000>;
};
nor@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x2 0x0 0x02000000>;
bank-width = <2>;
device-width = <1>;
};
nand@3,0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x3 0x0 0x00100000>;
bank-width = <2>;
device-width = <1>;
};
};
soc78100@f1000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x0 0xf1000000 0x00100000>;
bus-frequency = <0>;
PIC: pic@20200 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x20200 0x3c>;
compatible = "mrvl,pic";
};
timer@20300 {
compatible = "mrvl,timer";
reg = <0x20300 0x30>;
interrupts = <8>;
interrupt-parent = <&PIC>;
mrvl,has-wdt;
};
MPP: mpp@10000 {
#pin-cells = <2>;
compatible = "mrvl,mpp";
reg = <0x10000 0x34>;
pin-count = <50>;
pin-map = <
0 2 /* MPP[0]: GE1_TXCLK */
1 2 /* MPP[1]: GE1_TXCTL */
2 2 /* MPP[2]: GE1_RXCTL */
3 2 /* MPP[3]: GE1_RXCLK */
4 2 /* MPP[4]: GE1_TXD[0] */
5 2 /* MPP[5]: GE1_TXD[1] */
6 2 /* MPP[6]: GE1_TXD[2] */
7 2 /* MPP[7]: GE1_TXD[3] */
8 2 /* MPP[8]: GE1_RXD[0] */
9 2 /* MPP[9]: GE1_RXD[1] */
10 2 /* MPP[10]: GE1_RXD[2] */
11 2 /* MPP[11]: GE1_RXD[3] */
13 3 /* MPP[13]: SYSRST_OUTn */
14 3 /* MPP[14]: SATA1_ACTn */
15 3 /* MPP[15]: SATA0_ACTn */
16 4 /* MPP[16]: UA2_TXD */
17 4 /* MPP[17]: UA2_RXD */
18 3 /* MPP[18]: <UNKNOWN> */
19 3 /* MPP[19]: <UNKNOWN> */
20 3 /* MPP[20]: <UNKNOWN> */
21 3 /* MPP[21]: <UNKNOWN> */
22 4 /* MPP[22]: UA3_TXD */
23 4 >; /* MPP[21]: UA3_RXD */
};
GPIO: gpio@10100 {
#gpio-cells = <3>;
compatible = "mrvl,gpio";
reg = <0x10100 0x20>;
gpio-controller;
interrupts = <56 57 58 59>;
interrupt-parent = <&PIC>;
};
rtc@10300 {
compatible = "mrvl,rtc";
reg = <0x10300 0x08>;
};
twsi@11000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mrvl,twsi";
reg = <0x11000 0x20>;
interrupts = <2>;
interrupt-parent = <&PIC>;
};
twsi@11100 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mrvl,twsi";
reg = <0x11100 0x20>;
interrupts = <3>;
interrupt-parent = <&PIC>;
};
enet0: ethernet@72000 {
#address-cells = <1>;
#size-cells = <1>;
model = "V2";
compatible = "mrvl,ge";
reg = <0x72000 0x2000>;
ranges = <0x0 0x72000 0x2000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <41 42 43 40 70>;
interrupt-parent = <&PIC>;
phy-handle = <&phy0>;
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mrvl,mdio";
phy0: ethernet-phy@0 {
reg = <0x8>;
};
phy1: ethernet-phy@1 {
reg = <0x9>;
};
};
};
enet1: ethernet@76000 {
#address-cells = <1>;
#size-cells = <1>;
model = "V2";
compatible = "mrvl,ge";
reg = <0x76000 0x2000>;
ranges = <0x0 0x76000 0x2000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <45 46 47 44 70>;
interrupt-parent = <&PIC>;
phy-handle = <&phy1>;
};
serial0: serial@12000 {
compatible = "ns16550";
reg = <0x12000 0x20>;
reg-shift = <2>;
clock-frequency = <0>;
interrupts = <12>;
interrupt-parent = <&PIC>;
};
serial1: serial@12100 {
compatible = "ns16550";
reg = <0x12100 0x20>;
reg-shift = <2>;
clock-frequency = <0>;
interrupts = <13>;
interrupt-parent = <&PIC>;
};
usb@50000 {
compatible = "mrvl,usb-ehci", "usb-ehci";
reg = <0x50000 0x1000>;
interrupts = <72 16>;
interrupt-parent = <&PIC>;
};
usb@51000 {
compatible = "mrvl,usb-ehci", "usb-ehci";
reg = <0x51000 0x1000>;
interrupts = <72 17>;
interrupt-parent = <&PIC>;
};
usb@52000 {
compatible = "mrvl,usb-ehci", "usb-ehci";
reg = <0x52000 0x1000>;
interrupts = <72 18>;
interrupt-parent = <&PIC>;
};
xor@60000 {
compatible = "mrvl,xor";
reg = <0x60000 0x1000>;
interrupts = <22 23>;
interrupt-parent = <&PIC>;
};
crypto@90000 {
compatible = "mrvl,cesa";
reg = <0x90000 0x10000>;
interrupts = <19>;
interrupt-parent = <&PIC>;
};
sata@a0000 {
compatible = "mrvl,sata";
reg = <0xa0000 0x6000>;
interrupts = <26>;
interrupt-parent = <&PIC>;
};
};
pci0: pcie@f1040000 {
compatible = "mrvl,pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xf1040000 0x2000>;
bus-range = <0 255>;
ranges = <0x02000000 0x0 0xf2000000 0xf2000000 0x0 0x04000000
0x01000000 0x0 0x00000000 0xf1100000 0x0 0x00100000>;
clock-frequency = <33333333>;
interrupt-parent = <&PIC>;
interrupts = <68>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x1 */
0x0800 0x0 0x0 0x1 &PIC 0x20
0x0800 0x0 0x0 0x2 &PIC 0x21
0x0800 0x0 0x0 0x3 &PIC 0x22
0x0800 0x0 0x0 0x4 &PIC 0x23
>;
};
sram@fd000000 {
compatible = "mrvl,cesa-sram";
reg = <0xfd000000 0x00100000>;
};
chosen {
stdin = "serial0";
stdout = "serial0";
};
};