Current Path : /usr/src/sys/boot/pc98/libpc98/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //usr/src/sys/boot/pc98/libpc98/bioscd.c |
/*- * Copyright (c) 1998 Michael Smith <msmith@freebsd.org> * Copyright (c) 2001 John H. Baldwin <jhb@FreeBSD.org> * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include <sys/cdefs.h> __FBSDID("$FreeBSD: release/9.1.0/sys/boot/pc98/libpc98/bioscd.c 229501 2012-01-04 16:39:39Z jhb $"); /* * BIOS CD device handling for CD's that have been booted off of via no * emulation booting as defined in the El Torito standard. * * Ideas and algorithms from: * * - FreeBSD libi386/biosdisk.c * */ #include <stand.h> #include <sys/param.h> #include <machine/bootinfo.h> #include <stdarg.h> #include <bootstrap.h> #include <btxv86.h> #include "libi386.h" #define BIOSCD_SECSIZE 2048 #define BUFSIZE (1 * BIOSCD_SECSIZE) #define MAXBCDEV 1 /* Major numbers for devices we frontend for. */ #define ACDMAJOR 117 #define CDMAJOR 15 #ifdef DISK_DEBUG # define DEBUG(fmt, args...) printf("%s: " fmt "\n" , __func__ , ## args) #else # define DEBUG(fmt, args...) #endif struct specification_packet { u_char sp_size; u_char sp_bootmedia; u_char sp_drive; u_char sp_controller; u_int sp_lba; u_short sp_devicespec; u_short sp_buffersegment; u_short sp_loadsegment; u_short sp_sectorcount; u_short sp_cylsec; u_char sp_head; }; /* * List of BIOS devices, translation from disk unit number to * BIOS unit number. */ static struct bcinfo { int bc_unit; /* BIOS unit number */ struct specification_packet bc_sp; } bcinfo [MAXBCDEV]; static int nbcinfo = 0; static int bc_read(int unit, daddr_t dblk, int blks, caddr_t dest); static int bc_init(void); static int bc_strategy(void *devdata, int flag, daddr_t dblk, size_t size, char *buf, size_t *rsize); static int bc_open(struct open_file *f, ...); static int bc_close(struct open_file *f); static void bc_print(int verbose); struct devsw bioscd = { "cd", DEVT_CD, bc_init, bc_strategy, bc_open, bc_close, noioctl, bc_print, NULL }; /* * Translate between BIOS device numbers and our private unit numbers. */ int bc_bios2unit(int biosdev) { int i; DEBUG("looking for bios device 0x%x", biosdev); for (i = 0; i < nbcinfo; i++) { DEBUG("bc unit %d is BIOS device 0x%x", i, bcinfo[i].bc_unit); if (bcinfo[i].bc_unit == biosdev) return(i); } return(-1); } int bc_unit2bios(int unit) { if ((unit >= 0) && (unit < nbcinfo)) return(bcinfo[unit].bc_unit); return(-1); } /* * We can't quiz, we have to be told what device to use, so this functoin * doesn't do anything. Instead, the loader calls bc_add() with the BIOS * device number to add. */ static int bc_init(void) { return (0); } int bc_add(int biosdev) { if (nbcinfo >= MAXBCDEV) return (-1); bcinfo[nbcinfo].bc_unit = biosdev; /* SCSI CD-ROM only */ if ((biosdev & 0xf0) != 0xa0) return (-1); if ((((uint32_t *)PTOV(0xA1460))[biosdev & 0x0f] & 0x1f) != 5) return (-1); printf("BIOS CD is cd%d\n", nbcinfo); nbcinfo++; return(0); } /* * Print information about disks */ static void bc_print(int verbose) { char line[80]; int i; for (i = 0; i < nbcinfo; i++) { sprintf(line, " cd%d: Device 0x%x\n", i, bcinfo[i].bc_sp.sp_devicespec); pager_output(line); } } /* * Attempt to open the disk described by (dev) for use by (f). */ static int bc_open(struct open_file *f, ...) { va_list ap; struct i386_devdesc *dev; va_start(ap, f); dev = va_arg(ap, struct i386_devdesc *); va_end(ap); if (dev->d_unit >= nbcinfo) { DEBUG("attempt to open nonexistent disk"); return(ENXIO); } return(0); } static int bc_close(struct open_file *f) { return(0); } static int bc_strategy(void *devdata, int rw, daddr_t dblk, size_t size, char *buf, size_t *rsize) { struct i386_devdesc *dev; int unit; int blks; #ifdef BD_SUPPORT_FRAGS char fragbuf[BIOSCD_SECSIZE]; size_t fragsize; fragsize = size % BIOSCD_SECSIZE; #else if (size % BIOSCD_SECSIZE) return (EINVAL); #endif if (rw != F_READ) return(EROFS); dev = (struct i386_devdesc *)devdata; unit = dev->d_unit; blks = size / BIOSCD_SECSIZE; if (dblk % (BIOSCD_SECSIZE / DEV_BSIZE) != 0) return (EINVAL); dblk /= (BIOSCD_SECSIZE / DEV_BSIZE); DEBUG("read %d from %lld to %p", blks, dblk, buf); if (rsize) *rsize = 0; if (blks && bc_read(unit, dblk, blks, buf)) { DEBUG("read error"); return (EIO); } #ifdef BD_SUPPORT_FRAGS DEBUG("frag read %d from %lld+%d to %p", fragsize, dblk, blks, buf + (blks * BIOSCD_SECSIZE)); if (fragsize && bc_read(unit, dblk + blks, 1, fragbuf)) { DEBUG("frag read error"); return(EIO); } bcopy(fragbuf, buf + (blks * BIOSCD_SECSIZE), fragsize); #endif if (rsize) *rsize = size; return (0); } /* Max number of sectors to bounce-buffer at a time. */ #define CD_BOUNCEBUF 8 static int bc_read(int unit, daddr_t dblk, int blks, caddr_t dest) { u_int maxfer, resid, result, retry, x; caddr_t bbuf, p, xp; int biosdev; #ifdef DISK_DEBUG int error; #endif /* Just in case some idiot actually tries to read -1 blocks... */ if (blks < 0) return (-1); /* If nothing to do, just return succcess. */ if (blks == 0) return (0); /* Decide whether we have to bounce */ if (VTOP(dest) >> 20 != 0) { /* * The destination buffer is above first 1MB of * physical memory so we have to arrange a suitable * bounce buffer. */ x = min(CD_BOUNCEBUF, (unsigned)blks); bbuf = alloca(x * BIOSCD_SECSIZE); maxfer = x; } else { bbuf = NULL; maxfer = 0; } biosdev = bc_unit2bios(unit); resid = blks; p = dest; while (resid > 0) { if (bbuf) xp = bbuf; else xp = p; x = resid; if (maxfer > 0) x = min(x, maxfer); /* * Loop retrying the operation a couple of times. The BIOS * may also retry. */ for (retry = 0; retry < 3; retry++) { /* If retrying, reset the drive */ if (retry > 0) { v86.ctl = V86_FLAGS; v86.addr = 0x1b; v86.eax = 0x0300 | biosdev; v86int(); } v86.ctl = V86_FLAGS; v86.addr = 0x1b; v86.eax = 0x0600 | (biosdev & 0x7f); v86.ebx = x * BIOSCD_SECSIZE; v86.ecx = dblk & 0xffff; v86.edx = (dblk >> 16) & 0xffff; v86.ebp = VTOPOFF(xp); v86.es = VTOPSEG(xp); v86int(); result = V86_CY(v86.efl); if (result == 0) break; } #ifdef DISK_DEBUG error = (v86.eax >> 8) & 0xff; #endif DEBUG("%d sectors from %lld to %p (0x%x) %s", x, dblk, p, VTOP(p), result ? "failed" : "ok"); DEBUG("unit %d status 0x%x", unit, error); if (bbuf != NULL) bcopy(bbuf, p, x * BIOSCD_SECSIZE); p += (x * BIOSCD_SECSIZE); dblk += x; resid -= x; } /* hexdump(dest, (blks * BIOSCD_SECSIZE)); */ return(0); } /* * Return a suitable dev_t value for (dev). */ int bc_getdev(struct i386_devdesc *dev) { int biosdev, unit, device; int major; int rootdev; unit = dev->d_unit; biosdev = bc_unit2bios(unit); DEBUG("unit %d BIOS device %d", unit, biosdev); if (biosdev == -1) /* not a BIOS device */ return(-1); device = biosdev & 0xf0; if (device == 0x80) major = ACDMAJOR; else if (device == 0xa0) major = CDMAJOR; else return (-1); unit = 0; /* XXX */ /* XXX: Assume partition 'a'. */ rootdev = MAKEBOOTDEV(major, 0, unit, 0); DEBUG("dev is 0x%x\n", rootdev); return(rootdev); }