| Current Path : /usr/src/sys/contrib/dev/acpica/dispatcher/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //usr/src/sys/contrib/dev/acpica/dispatcher/dsmthdat.c |
/*******************************************************************************
*
* Module Name: dsmthdat - control method arguments and local variables
*
******************************************************************************/
/*
* Copyright (C) 2000 - 2011, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#define __DSMTHDAT_C__
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
#include <contrib/dev/acpica/include/acdispat.h>
#include <contrib/dev/acpica/include/acnamesp.h>
#include <contrib/dev/acpica/include/acinterp.h>
#define _COMPONENT ACPI_DISPATCHER
ACPI_MODULE_NAME ("dsmthdat")
/* Local prototypes */
static void
AcpiDsMethodDataDeleteValue (
UINT8 Type,
UINT32 Index,
ACPI_WALK_STATE *WalkState);
static ACPI_STATUS
AcpiDsMethodDataSetValue (
UINT8 Type,
UINT32 Index,
ACPI_OPERAND_OBJECT *Object,
ACPI_WALK_STATE *WalkState);
#ifdef ACPI_OBSOLETE_FUNCTIONS
ACPI_OBJECT_TYPE
AcpiDsMethodDataGetType (
UINT16 Opcode,
UINT32 Index,
ACPI_WALK_STATE *WalkState);
#endif
/*******************************************************************************
*
* FUNCTION: AcpiDsMethodDataInit
*
* PARAMETERS: WalkState - Current walk state object
*
* RETURN: Status
*
* DESCRIPTION: Initialize the data structures that hold the method's arguments
* and locals. The data struct is an array of namespace nodes for
* each - this allows RefOf and DeRefOf to work properly for these
* special data types.
*
* NOTES: WalkState fields are initialized to zero by the
* ACPI_ALLOCATE_ZEROED().
*
* A pseudo-Namespace Node is assigned to each argument and local
* so that RefOf() can return a pointer to the Node.
*
******************************************************************************/
void
AcpiDsMethodDataInit (
ACPI_WALK_STATE *WalkState)
{
UINT32 i;
ACPI_FUNCTION_TRACE (DsMethodDataInit);
/* Init the method arguments */
for (i = 0; i < ACPI_METHOD_NUM_ARGS; i++)
{
ACPI_MOVE_32_TO_32 (&WalkState->Arguments[i].Name, NAMEOF_ARG_NTE);
WalkState->Arguments[i].Name.Integer |= (i << 24);
WalkState->Arguments[i].DescriptorType = ACPI_DESC_TYPE_NAMED;
WalkState->Arguments[i].Type = ACPI_TYPE_ANY;
WalkState->Arguments[i].Flags = ANOBJ_METHOD_ARG;
}
/* Init the method locals */
for (i = 0; i < ACPI_METHOD_NUM_LOCALS; i++)
{
ACPI_MOVE_32_TO_32 (&WalkState->LocalVariables[i].Name, NAMEOF_LOCAL_NTE);
WalkState->LocalVariables[i].Name.Integer |= (i << 24);
WalkState->LocalVariables[i].DescriptorType = ACPI_DESC_TYPE_NAMED;
WalkState->LocalVariables[i].Type = ACPI_TYPE_ANY;
WalkState->LocalVariables[i].Flags = ANOBJ_METHOD_LOCAL;
}
return_VOID;
}
/*******************************************************************************
*
* FUNCTION: AcpiDsMethodDataDeleteAll
*
* PARAMETERS: WalkState - Current walk state object
*
* RETURN: None
*
* DESCRIPTION: Delete method locals and arguments. Arguments are only
* deleted if this method was called from another method.
*
******************************************************************************/
void
AcpiDsMethodDataDeleteAll (
ACPI_WALK_STATE *WalkState)
{
UINT32 Index;
ACPI_FUNCTION_TRACE (DsMethodDataDeleteAll);
/* Detach the locals */
for (Index = 0; Index < ACPI_METHOD_NUM_LOCALS; Index++)
{
if (WalkState->LocalVariables[Index].Object)
{
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Deleting Local%u=%p\n",
Index, WalkState->LocalVariables[Index].Object));
/* Detach object (if present) and remove a reference */
AcpiNsDetachObject (&WalkState->LocalVariables[Index]);
}
}
/* Detach the arguments */
for (Index = 0; Index < ACPI_METHOD_NUM_ARGS; Index++)
{
if (WalkState->Arguments[Index].Object)
{
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Deleting Arg%u=%p\n",
Index, WalkState->Arguments[Index].Object));
/* Detach object (if present) and remove a reference */
AcpiNsDetachObject (&WalkState->Arguments[Index]);
}
}
return_VOID;
}
/*******************************************************************************
*
* FUNCTION: AcpiDsMethodDataInitArgs
*
* PARAMETERS: *Params - Pointer to a parameter list for the method
* MaxParamCount - The arg count for this method
* WalkState - Current walk state object
*
* RETURN: Status
*
* DESCRIPTION: Initialize arguments for a method. The parameter list is a list
* of ACPI operand objects, either null terminated or whose length
* is defined by MaxParamCount.
*
******************************************************************************/
ACPI_STATUS
AcpiDsMethodDataInitArgs (
ACPI_OPERAND_OBJECT **Params,
UINT32 MaxParamCount,
ACPI_WALK_STATE *WalkState)
{
ACPI_STATUS Status;
UINT32 Index = 0;
ACPI_FUNCTION_TRACE_PTR (DsMethodDataInitArgs, Params);
if (!Params)
{
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "No param list passed to method\n"));
return_ACPI_STATUS (AE_OK);
}
/* Copy passed parameters into the new method stack frame */
while ((Index < ACPI_METHOD_NUM_ARGS) &&
(Index < MaxParamCount) &&
Params[Index])
{
/*
* A valid parameter.
* Store the argument in the method/walk descriptor.
* Do not copy the arg in order to implement call by reference
*/
Status = AcpiDsMethodDataSetValue (ACPI_REFCLASS_ARG, Index,
Params[Index], WalkState);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
Index++;
}
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "%u args passed to method\n", Index));
return_ACPI_STATUS (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: AcpiDsMethodDataGetNode
*
* PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
* Index - Which Local or Arg whose type to get
* WalkState - Current walk state object
* Node - Where the node is returned.
*
* RETURN: Status and node
*
* DESCRIPTION: Get the Node associated with a local or arg.
*
******************************************************************************/
ACPI_STATUS
AcpiDsMethodDataGetNode (
UINT8 Type,
UINT32 Index,
ACPI_WALK_STATE *WalkState,
ACPI_NAMESPACE_NODE **Node)
{
ACPI_FUNCTION_TRACE (DsMethodDataGetNode);
/*
* Method Locals and Arguments are supported
*/
switch (Type)
{
case ACPI_REFCLASS_LOCAL:
if (Index > ACPI_METHOD_MAX_LOCAL)
{
ACPI_ERROR ((AE_INFO,
"Local index %u is invalid (max %u)",
Index, ACPI_METHOD_MAX_LOCAL));
return_ACPI_STATUS (AE_AML_INVALID_INDEX);
}
/* Return a pointer to the pseudo-node */
*Node = &WalkState->LocalVariables[Index];
break;
case ACPI_REFCLASS_ARG:
if (Index > ACPI_METHOD_MAX_ARG)
{
ACPI_ERROR ((AE_INFO,
"Arg index %u is invalid (max %u)",
Index, ACPI_METHOD_MAX_ARG));
return_ACPI_STATUS (AE_AML_INVALID_INDEX);
}
/* Return a pointer to the pseudo-node */
*Node = &WalkState->Arguments[Index];
break;
default:
ACPI_ERROR ((AE_INFO, "Type %u is invalid", Type));
return_ACPI_STATUS (AE_TYPE);
}
return_ACPI_STATUS (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: AcpiDsMethodDataSetValue
*
* PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
* Index - Which Local or Arg to get
* Object - Object to be inserted into the stack entry
* WalkState - Current walk state object
*
* RETURN: Status
*
* DESCRIPTION: Insert an object onto the method stack at entry Opcode:Index.
* Note: There is no "implicit conversion" for locals.
*
******************************************************************************/
static ACPI_STATUS
AcpiDsMethodDataSetValue (
UINT8 Type,
UINT32 Index,
ACPI_OPERAND_OBJECT *Object,
ACPI_WALK_STATE *WalkState)
{
ACPI_STATUS Status;
ACPI_NAMESPACE_NODE *Node;
ACPI_FUNCTION_TRACE (DsMethodDataSetValue);
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
"NewObj %p Type %2.2X, Refs=%u [%s]\n", Object,
Type, Object->Common.ReferenceCount,
AcpiUtGetTypeName (Object->Common.Type)));
/* Get the namespace node for the arg/local */
Status = AcpiDsMethodDataGetNode (Type, Index, WalkState, &Node);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/*
* Increment ref count so object can't be deleted while installed.
* NOTE: We do not copy the object in order to preserve the call by
* reference semantics of ACPI Control Method invocation.
* (See ACPI Specification 2.0C)
*/
AcpiUtAddReference (Object);
/* Install the object */
Node->Object = Object;
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiDsMethodDataGetValue
*
* PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
* Index - Which localVar or argument to get
* WalkState - Current walk state object
* DestDesc - Where Arg or Local value is returned
*
* RETURN: Status
*
* DESCRIPTION: Retrieve value of selected Arg or Local for this method
* Used only in AcpiExResolveToValue().
*
******************************************************************************/
ACPI_STATUS
AcpiDsMethodDataGetValue (
UINT8 Type,
UINT32 Index,
ACPI_WALK_STATE *WalkState,
ACPI_OPERAND_OBJECT **DestDesc)
{
ACPI_STATUS Status;
ACPI_NAMESPACE_NODE *Node;
ACPI_OPERAND_OBJECT *Object;
ACPI_FUNCTION_TRACE (DsMethodDataGetValue);
/* Validate the object descriptor */
if (!DestDesc)
{
ACPI_ERROR ((AE_INFO, "Null object descriptor pointer"));
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
/* Get the namespace node for the arg/local */
Status = AcpiDsMethodDataGetNode (Type, Index, WalkState, &Node);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/* Get the object from the node */
Object = Node->Object;
/* Examine the returned object, it must be valid. */
if (!Object)
{
/*
* Index points to uninitialized object.
* This means that either 1) The expected argument was
* not passed to the method, or 2) A local variable
* was referenced by the method (via the ASL)
* before it was initialized. Either case is an error.
*/
/* If slack enabled, init the LocalX/ArgX to an Integer of value zero */
if (AcpiGbl_EnableInterpreterSlack)
{
Object = AcpiUtCreateIntegerObject ((UINT64) 0);
if (!Object)
{
return_ACPI_STATUS (AE_NO_MEMORY);
}
Node->Object = Object;
}
/* Otherwise, return the error */
else switch (Type)
{
case ACPI_REFCLASS_ARG:
ACPI_ERROR ((AE_INFO,
"Uninitialized Arg[%u] at node %p",
Index, Node));
return_ACPI_STATUS (AE_AML_UNINITIALIZED_ARG);
case ACPI_REFCLASS_LOCAL:
/*
* No error message for this case, will be trapped again later to
* detect and ignore cases of Store(LocalX,LocalX)
*/
return_ACPI_STATUS (AE_AML_UNINITIALIZED_LOCAL);
default:
ACPI_ERROR ((AE_INFO, "Not a Arg/Local opcode: 0x%X", Type));
return_ACPI_STATUS (AE_AML_INTERNAL);
}
}
/*
* The Index points to an initialized and valid object.
* Return an additional reference to the object
*/
*DestDesc = Object;
AcpiUtAddReference (Object);
return_ACPI_STATUS (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: AcpiDsMethodDataDeleteValue
*
* PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
* Index - Which localVar or argument to delete
* WalkState - Current walk state object
*
* RETURN: None
*
* DESCRIPTION: Delete the entry at Opcode:Index. Inserts
* a null into the stack slot after the object is deleted.
*
******************************************************************************/
static void
AcpiDsMethodDataDeleteValue (
UINT8 Type,
UINT32 Index,
ACPI_WALK_STATE *WalkState)
{
ACPI_STATUS Status;
ACPI_NAMESPACE_NODE *Node;
ACPI_OPERAND_OBJECT *Object;
ACPI_FUNCTION_TRACE (DsMethodDataDeleteValue);
/* Get the namespace node for the arg/local */
Status = AcpiDsMethodDataGetNode (Type, Index, WalkState, &Node);
if (ACPI_FAILURE (Status))
{
return_VOID;
}
/* Get the associated object */
Object = AcpiNsGetAttachedObject (Node);
/*
* Undefine the Arg or Local by setting its descriptor
* pointer to NULL. Locals/Args can contain both
* ACPI_OPERAND_OBJECTS and ACPI_NAMESPACE_NODEs
*/
Node->Object = NULL;
if ((Object) &&
(ACPI_GET_DESCRIPTOR_TYPE (Object) == ACPI_DESC_TYPE_OPERAND))
{
/*
* There is a valid object.
* Decrement the reference count by one to balance the
* increment when the object was stored.
*/
AcpiUtRemoveReference (Object);
}
return_VOID;
}
/*******************************************************************************
*
* FUNCTION: AcpiDsStoreObjectToLocal
*
* PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
* Index - Which Local or Arg to set
* ObjDesc - Value to be stored
* WalkState - Current walk state
*
* RETURN: Status
*
* DESCRIPTION: Store a value in an Arg or Local. The ObjDesc is installed
* as the new value for the Arg or Local and the reference count
* for ObjDesc is incremented.
*
******************************************************************************/
ACPI_STATUS
AcpiDsStoreObjectToLocal (
UINT8 Type,
UINT32 Index,
ACPI_OPERAND_OBJECT *ObjDesc,
ACPI_WALK_STATE *WalkState)
{
ACPI_STATUS Status;
ACPI_NAMESPACE_NODE *Node;
ACPI_OPERAND_OBJECT *CurrentObjDesc;
ACPI_OPERAND_OBJECT *NewObjDesc;
ACPI_FUNCTION_TRACE (DsStoreObjectToLocal);
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Type=%2.2X Index=%u Obj=%p\n",
Type, Index, ObjDesc));
/* Parameter validation */
if (!ObjDesc)
{
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
/* Get the namespace node for the arg/local */
Status = AcpiDsMethodDataGetNode (Type, Index, WalkState, &Node);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
CurrentObjDesc = AcpiNsGetAttachedObject (Node);
if (CurrentObjDesc == ObjDesc)
{
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Obj=%p already installed!\n",
ObjDesc));
return_ACPI_STATUS (Status);
}
/*
* If the reference count on the object is more than one, we must
* take a copy of the object before we store. A reference count
* of exactly 1 means that the object was just created during the
* evaluation of an expression, and we can safely use it since it
* is not used anywhere else.
*/
NewObjDesc = ObjDesc;
if (ObjDesc->Common.ReferenceCount > 1)
{
Status = AcpiUtCopyIobjectToIobject (ObjDesc, &NewObjDesc, WalkState);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
}
/*
* If there is an object already in this slot, we either
* have to delete it, or if this is an argument and there
* is an object reference stored there, we have to do
* an indirect store!
*/
if (CurrentObjDesc)
{
/*
* Check for an indirect store if an argument
* contains an object reference (stored as an Node).
* We don't allow this automatic dereferencing for
* locals, since a store to a local should overwrite
* anything there, including an object reference.
*
* If both Arg0 and Local0 contain RefOf (Local4):
*
* Store (1, Arg0) - Causes indirect store to local4
* Store (1, Local0) - Stores 1 in local0, overwriting
* the reference to local4
* Store (1, DeRefof (Local0)) - Causes indirect store to local4
*
* Weird, but true.
*/
if (Type == ACPI_REFCLASS_ARG)
{
/*
* If we have a valid reference object that came from RefOf(),
* do the indirect store
*/
if ((ACPI_GET_DESCRIPTOR_TYPE (CurrentObjDesc) == ACPI_DESC_TYPE_OPERAND) &&
(CurrentObjDesc->Common.Type == ACPI_TYPE_LOCAL_REFERENCE) &&
(CurrentObjDesc->Reference.Class == ACPI_REFCLASS_REFOF))
{
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
"Arg (%p) is an ObjRef(Node), storing in node %p\n",
NewObjDesc, CurrentObjDesc));
/*
* Store this object to the Node (perform the indirect store)
* NOTE: No implicit conversion is performed, as per the ACPI
* specification rules on storing to Locals/Args.
*/
Status = AcpiExStoreObjectToNode (NewObjDesc,
CurrentObjDesc->Reference.Object, WalkState,
ACPI_NO_IMPLICIT_CONVERSION);
/* Remove local reference if we copied the object above */
if (NewObjDesc != ObjDesc)
{
AcpiUtRemoveReference (NewObjDesc);
}
return_ACPI_STATUS (Status);
}
}
/* Delete the existing object before storing the new one */
AcpiDsMethodDataDeleteValue (Type, Index, WalkState);
}
/*
* Install the Obj descriptor (*NewObjDesc) into
* the descriptor for the Arg or Local.
* (increments the object reference count by one)
*/
Status = AcpiDsMethodDataSetValue (Type, Index, NewObjDesc, WalkState);
/* Remove local reference if we copied the object above */
if (NewObjDesc != ObjDesc)
{
AcpiUtRemoveReference (NewObjDesc);
}
return_ACPI_STATUS (Status);
}
#ifdef ACPI_OBSOLETE_FUNCTIONS
/*******************************************************************************
*
* FUNCTION: AcpiDsMethodDataGetType
*
* PARAMETERS: Opcode - Either AML_LOCAL_OP or AML_ARG_OP
* Index - Which Local or Arg whose type to get
* WalkState - Current walk state object
*
* RETURN: Data type of current value of the selected Arg or Local
*
* DESCRIPTION: Get the type of the object stored in the Local or Arg
*
******************************************************************************/
ACPI_OBJECT_TYPE
AcpiDsMethodDataGetType (
UINT16 Opcode,
UINT32 Index,
ACPI_WALK_STATE *WalkState)
{
ACPI_STATUS Status;
ACPI_NAMESPACE_NODE *Node;
ACPI_OPERAND_OBJECT *Object;
ACPI_FUNCTION_TRACE (DsMethodDataGetType);
/* Get the namespace node for the arg/local */
Status = AcpiDsMethodDataGetNode (Opcode, Index, WalkState, &Node);
if (ACPI_FAILURE (Status))
{
return_VALUE ((ACPI_TYPE_NOT_FOUND));
}
/* Get the object */
Object = AcpiNsGetAttachedObject (Node);
if (!Object)
{
/* Uninitialized local/arg, return TYPE_ANY */
return_VALUE (ACPI_TYPE_ANY);
}
/* Get the object type */
return_VALUE (Object->Type);
}
#endif