| Current Path : /usr/src/sys/contrib/dev/acpica/hardware/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //usr/src/sys/contrib/dev/acpica/hardware/hwsleep.c |
/******************************************************************************
*
* Name: hwsleep.c - ACPI Hardware Sleep/Wake Interface
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2011, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME ("hwsleep")
/*******************************************************************************
*
* FUNCTION: AcpiSetFirmwareWakingVector
*
* PARAMETERS: PhysicalAddress - 32-bit physical address of ACPI real mode
* entry point.
*
* RETURN: Status
*
* DESCRIPTION: Sets the 32-bit FirmwareWakingVector field of the FACS
*
******************************************************************************/
ACPI_STATUS
AcpiSetFirmwareWakingVector (
UINT32 PhysicalAddress)
{
ACPI_FUNCTION_TRACE (AcpiSetFirmwareWakingVector);
/* Set the 32-bit vector */
AcpiGbl_FACS->FirmwareWakingVector = PhysicalAddress;
/* Clear the 64-bit vector if it exists */
if ((AcpiGbl_FACS->Length > 32) && (AcpiGbl_FACS->Version >= 1))
{
AcpiGbl_FACS->XFirmwareWakingVector = 0;
}
return_ACPI_STATUS (AE_OK);
}
ACPI_EXPORT_SYMBOL (AcpiSetFirmwareWakingVector)
#if ACPI_MACHINE_WIDTH == 64
/*******************************************************************************
*
* FUNCTION: AcpiSetFirmwareWakingVector64
*
* PARAMETERS: PhysicalAddress - 64-bit physical address of ACPI protected
* mode entry point.
*
* RETURN: Status
*
* DESCRIPTION: Sets the 64-bit X_FirmwareWakingVector field of the FACS, if
* it exists in the table. This function is intended for use with
* 64-bit host operating systems.
*
******************************************************************************/
ACPI_STATUS
AcpiSetFirmwareWakingVector64 (
UINT64 PhysicalAddress)
{
ACPI_FUNCTION_TRACE (AcpiSetFirmwareWakingVector64);
/* Determine if the 64-bit vector actually exists */
if ((AcpiGbl_FACS->Length <= 32) || (AcpiGbl_FACS->Version < 1))
{
return_ACPI_STATUS (AE_NOT_EXIST);
}
/* Clear 32-bit vector, set the 64-bit X_ vector */
AcpiGbl_FACS->FirmwareWakingVector = 0;
AcpiGbl_FACS->XFirmwareWakingVector = PhysicalAddress;
return_ACPI_STATUS (AE_OK);
}
ACPI_EXPORT_SYMBOL (AcpiSetFirmwareWakingVector64)
#endif
/*******************************************************************************
*
* FUNCTION: AcpiEnterSleepStatePrep
*
* PARAMETERS: SleepState - Which sleep state to enter
*
* RETURN: Status
*
* DESCRIPTION: Prepare to enter a system sleep state (see ACPI 2.0 spec p 231)
* This function must execute with interrupts enabled.
* We break sleeping into 2 stages so that OSPM can handle
* various OS-specific tasks between the two steps.
*
******************************************************************************/
ACPI_STATUS
AcpiEnterSleepStatePrep (
UINT8 SleepState)
{
ACPI_STATUS Status;
ACPI_OBJECT_LIST ArgList;
ACPI_OBJECT Arg;
ACPI_FUNCTION_TRACE (AcpiEnterSleepStatePrep);
/* _PSW methods could be run here to enable wake-on keyboard, LAN, etc. */
Status = AcpiGetSleepTypeData (SleepState,
&AcpiGbl_SleepTypeA, &AcpiGbl_SleepTypeB);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/* Execute the _PTS method (Prepare To Sleep) */
ArgList.Count = 1;
ArgList.Pointer = &Arg;
Arg.Type = ACPI_TYPE_INTEGER;
Arg.Integer.Value = SleepState;
Status = AcpiEvaluateObject (NULL, METHOD_NAME__PTS, &ArgList, NULL);
if (ACPI_FAILURE (Status) && Status != AE_NOT_FOUND)
{
return_ACPI_STATUS (Status);
}
/* Setup the argument to the _SST method (System STatus) */
switch (SleepState)
{
case ACPI_STATE_S0:
Arg.Integer.Value = ACPI_SST_WORKING;
break;
case ACPI_STATE_S1:
case ACPI_STATE_S2:
case ACPI_STATE_S3:
Arg.Integer.Value = ACPI_SST_SLEEPING;
break;
case ACPI_STATE_S4:
Arg.Integer.Value = ACPI_SST_SLEEP_CONTEXT;
break;
default:
Arg.Integer.Value = ACPI_SST_INDICATOR_OFF; /* Default is off */
break;
}
/*
* Set the system indicators to show the desired sleep state.
* _SST is an optional method (return no error if not found)
*/
Status = AcpiEvaluateObject (NULL, METHOD_NAME__SST, &ArgList, NULL);
if (ACPI_FAILURE (Status) && Status != AE_NOT_FOUND)
{
ACPI_EXCEPTION ((AE_INFO, Status, "While executing method _SST"));
}
return_ACPI_STATUS (AE_OK);
}
ACPI_EXPORT_SYMBOL (AcpiEnterSleepStatePrep)
/*******************************************************************************
*
* FUNCTION: AcpiEnterSleepState
*
* PARAMETERS: SleepState - Which sleep state to enter
*
* RETURN: Status
*
* DESCRIPTION: Enter a system sleep state
* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
*
******************************************************************************/
ACPI_STATUS
AcpiEnterSleepState (
UINT8 SleepState)
{
UINT32 Pm1aControl;
UINT32 Pm1bControl;
ACPI_BIT_REGISTER_INFO *SleepTypeRegInfo;
ACPI_BIT_REGISTER_INFO *SleepEnableRegInfo;
UINT32 InValue;
ACPI_OBJECT_LIST ArgList;
ACPI_OBJECT Arg;
UINT32 Retry;
ACPI_STATUS Status;
ACPI_FUNCTION_TRACE (AcpiEnterSleepState);
if ((AcpiGbl_SleepTypeA > ACPI_SLEEP_TYPE_MAX) ||
(AcpiGbl_SleepTypeB > ACPI_SLEEP_TYPE_MAX))
{
ACPI_ERROR ((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X",
AcpiGbl_SleepTypeA, AcpiGbl_SleepTypeB));
return_ACPI_STATUS (AE_AML_OPERAND_VALUE);
}
SleepTypeRegInfo = AcpiHwGetBitRegisterInfo (ACPI_BITREG_SLEEP_TYPE);
SleepEnableRegInfo = AcpiHwGetBitRegisterInfo (ACPI_BITREG_SLEEP_ENABLE);
/* Clear wake status */
Status = AcpiWriteBitRegister (ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/* Clear all fixed and general purpose status bits */
Status = AcpiHwClearAcpiStatus ();
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
if (SleepState != ACPI_STATE_S5)
{
/*
* Disable BM arbitration. This feature is contained within an
* optional register (PM2 Control), so ignore a BAD_ADDRESS
* exception.
*/
Status = AcpiWriteBitRegister (ACPI_BITREG_ARB_DISABLE, 1);
if (ACPI_FAILURE (Status) && (Status != AE_BAD_ADDRESS))
{
return_ACPI_STATUS (Status);
}
}
/*
* 1) Disable/Clear all GPEs
* 2) Enable all wakeup GPEs
*/
Status = AcpiHwDisableAllGpes ();
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
AcpiGbl_SystemAwakeAndRunning = FALSE;
Status = AcpiHwEnableAllWakeupGpes ();
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/* Execute the _GTS method (Going To Sleep) */
ArgList.Count = 1;
ArgList.Pointer = &Arg;
Arg.Type = ACPI_TYPE_INTEGER;
Arg.Integer.Value = SleepState;
Status = AcpiEvaluateObject (NULL, METHOD_NAME__GTS, &ArgList, NULL);
if (ACPI_FAILURE (Status) && Status != AE_NOT_FOUND)
{
return_ACPI_STATUS (Status);
}
/* Get current value of PM1A control */
Status = AcpiHwRegisterRead (ACPI_REGISTER_PM1_CONTROL,
&Pm1aControl);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
ACPI_DEBUG_PRINT ((ACPI_DB_INIT,
"Entering sleep state [S%u]\n", SleepState));
/* Clear the SLP_EN and SLP_TYP fields */
Pm1aControl &= ~(SleepTypeRegInfo->AccessBitMask |
SleepEnableRegInfo->AccessBitMask);
Pm1bControl = Pm1aControl;
/* Insert the SLP_TYP bits */
Pm1aControl |= (AcpiGbl_SleepTypeA << SleepTypeRegInfo->BitPosition);
Pm1bControl |= (AcpiGbl_SleepTypeB << SleepTypeRegInfo->BitPosition);
/*
* We split the writes of SLP_TYP and SLP_EN to workaround
* poorly implemented hardware.
*/
/* Write #1: write the SLP_TYP data to the PM1 Control registers */
Status = AcpiHwWritePm1Control (Pm1aControl, Pm1bControl);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/* Insert the sleep enable (SLP_EN) bit */
Pm1aControl |= SleepEnableRegInfo->AccessBitMask;
Pm1bControl |= SleepEnableRegInfo->AccessBitMask;
/* Flush caches, as per ACPI specification */
ACPI_FLUSH_CPU_CACHE ();
/* Write #2: Write both SLP_TYP + SLP_EN */
Status = AcpiHwWritePm1Control (Pm1aControl, Pm1bControl);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
if (SleepState > ACPI_STATE_S3)
{
/*
* We wanted to sleep > S3, but it didn't happen (by virtue of the
* fact that we are still executing!)
*
* Wait ten seconds, then try again. This is to get S4/S5 to work on
* all machines.
*
* We wait so long to allow chipsets that poll this reg very slowly
* to still read the right value. Ideally, this block would go
* away entirely.
*/
AcpiOsStall (10000000);
Status = AcpiHwRegisterWrite (ACPI_REGISTER_PM1_CONTROL,
SleepEnableRegInfo->AccessBitMask);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
}
/* Wait until we enter sleep state */
Retry = 1000;
do
{
Status = AcpiReadBitRegister (ACPI_BITREG_WAKE_STATUS, &InValue);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
if (AcpiGbl_EnableInterpreterSlack)
{
/*
* Some BIOSs don't set WAK_STS at all. Give up waiting after
* 1000 retries if it still isn't set.
*/
if (Retry-- == 0)
{
break;
}
}
/* Spin until we wake */
} while (!InValue);
return_ACPI_STATUS (AE_OK);
}
ACPI_EXPORT_SYMBOL (AcpiEnterSleepState)
/*******************************************************************************
*
* FUNCTION: AcpiEnterSleepStateS4bios
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Perform a S4 bios request.
* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
*
******************************************************************************/
ACPI_STATUS
AcpiEnterSleepStateS4bios (
void)
{
UINT32 InValue;
ACPI_STATUS Status;
ACPI_FUNCTION_TRACE (AcpiEnterSleepStateS4bios);
/* Clear the wake status bit (PM1) */
Status = AcpiWriteBitRegister (ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
Status = AcpiHwClearAcpiStatus ();
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/*
* 1) Disable/Clear all GPEs
* 2) Enable all wakeup GPEs
*/
Status = AcpiHwDisableAllGpes ();
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
AcpiGbl_SystemAwakeAndRunning = FALSE;
Status = AcpiHwEnableAllWakeupGpes ();
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
ACPI_FLUSH_CPU_CACHE ();
Status = AcpiHwWritePort (AcpiGbl_FADT.SmiCommand,
(UINT32) AcpiGbl_FADT.S4BiosRequest, 8);
do {
AcpiOsStall(1000);
Status = AcpiReadBitRegister (ACPI_BITREG_WAKE_STATUS, &InValue);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
} while (!InValue);
return_ACPI_STATUS (AE_OK);
}
ACPI_EXPORT_SYMBOL (AcpiEnterSleepStateS4bios)
/*******************************************************************************
*
* FUNCTION: AcpiLeaveSleepState
*
* PARAMETERS: SleepState - Which sleep state we just exited
*
* RETURN: Status
*
* DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
* Called with interrupts ENABLED.
*
******************************************************************************/
ACPI_STATUS
AcpiLeaveSleepState (
UINT8 SleepState)
{
ACPI_OBJECT_LIST ArgList;
ACPI_OBJECT Arg;
ACPI_STATUS Status;
ACPI_BIT_REGISTER_INFO *SleepTypeRegInfo;
ACPI_BIT_REGISTER_INFO *SleepEnableRegInfo;
UINT32 Pm1aControl;
UINT32 Pm1bControl;
ACPI_FUNCTION_TRACE (AcpiLeaveSleepState);
/*
* Set SLP_TYPE and SLP_EN to state S0.
* This is unclear from the ACPI Spec, but it is required
* by some machines.
*/
Status = AcpiGetSleepTypeData (ACPI_STATE_S0,
&AcpiGbl_SleepTypeA, &AcpiGbl_SleepTypeB);
if (ACPI_SUCCESS (Status))
{
SleepTypeRegInfo =
AcpiHwGetBitRegisterInfo (ACPI_BITREG_SLEEP_TYPE);
SleepEnableRegInfo =
AcpiHwGetBitRegisterInfo (ACPI_BITREG_SLEEP_ENABLE);
/* Get current value of PM1A control */
Status = AcpiHwRegisterRead (ACPI_REGISTER_PM1_CONTROL,
&Pm1aControl);
if (ACPI_SUCCESS (Status))
{
/* Clear the SLP_EN and SLP_TYP fields */
Pm1aControl &= ~(SleepTypeRegInfo->AccessBitMask |
SleepEnableRegInfo->AccessBitMask);
Pm1bControl = Pm1aControl;
/* Insert the SLP_TYP bits */
Pm1aControl |= (AcpiGbl_SleepTypeA <<
SleepTypeRegInfo->BitPosition);
Pm1bControl |= (AcpiGbl_SleepTypeB <<
SleepTypeRegInfo->BitPosition);
/* Write the control registers and ignore any errors */
(void) AcpiHwWritePm1Control (Pm1aControl, Pm1bControl);
}
}
/* Ensure EnterSleepStatePrep -> EnterSleepState ordering */
AcpiGbl_SleepTypeA = ACPI_SLEEP_TYPE_INVALID;
/* Setup parameter object */
ArgList.Count = 1;
ArgList.Pointer = &Arg;
Arg.Type = ACPI_TYPE_INTEGER;
/* Ignore any errors from these methods */
Arg.Integer.Value = ACPI_SST_WAKING;
Status = AcpiEvaluateObject (NULL, METHOD_NAME__SST, &ArgList, NULL);
if (ACPI_FAILURE (Status) && Status != AE_NOT_FOUND)
{
ACPI_EXCEPTION ((AE_INFO, Status, "During Method _SST"));
}
Arg.Integer.Value = SleepState;
Status = AcpiEvaluateObject (NULL, METHOD_NAME__BFS, &ArgList, NULL);
if (ACPI_FAILURE (Status) && Status != AE_NOT_FOUND)
{
ACPI_EXCEPTION ((AE_INFO, Status, "During Method _BFS"));
}
Status = AcpiEvaluateObject (NULL, METHOD_NAME__WAK, &ArgList, NULL);
if (ACPI_FAILURE (Status) && Status != AE_NOT_FOUND)
{
ACPI_EXCEPTION ((AE_INFO, Status, "During Method _WAK"));
}
/* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */
/*
* Restore the GPEs:
* 1) Disable/Clear all GPEs
* 2) Enable all runtime GPEs
*/
Status = AcpiHwDisableAllGpes ();
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
AcpiGbl_SystemAwakeAndRunning = TRUE;
Status = AcpiHwEnableAllRuntimeGpes ();
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/* Enable power button */
(void) AcpiWriteBitRegister(
AcpiGbl_FixedEventInfo[ACPI_EVENT_POWER_BUTTON].EnableRegisterId,
ACPI_ENABLE_EVENT);
(void) AcpiWriteBitRegister(
AcpiGbl_FixedEventInfo[ACPI_EVENT_POWER_BUTTON].StatusRegisterId,
ACPI_CLEAR_STATUS);
/*
* Enable BM arbitration. This feature is contained within an
* optional register (PM2 Control), so ignore a BAD_ADDRESS
* exception.
*/
Status = AcpiWriteBitRegister (ACPI_BITREG_ARB_DISABLE, 0);
if (ACPI_FAILURE (Status) && (Status != AE_BAD_ADDRESS))
{
return_ACPI_STATUS (Status);
}
Arg.Integer.Value = ACPI_SST_WORKING;
Status = AcpiEvaluateObject (NULL, METHOD_NAME__SST, &ArgList, NULL);
if (ACPI_FAILURE (Status) && Status != AE_NOT_FOUND)
{
ACPI_EXCEPTION ((AE_INFO, Status, "During Method _SST"));
}
return_ACPI_STATUS (Status);
}
ACPI_EXPORT_SYMBOL (AcpiLeaveSleepState)