| Current Path : /usr/src/sys/contrib/dev/acpica/include/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //usr/src/sys/contrib/dev/acpica/include/acmacros.h |
/******************************************************************************
*
* Name: acmacros.h - C macros for the entire subsystem.
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2011, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#ifndef __ACMACROS_H__
#define __ACMACROS_H__
/*
* Extract data using a pointer. Any more than a byte and we
* get into potential aligment issues -- see the STORE macros below.
* Use with care.
*/
#define ACPI_GET8(ptr) *ACPI_CAST_PTR (UINT8, ptr)
#define ACPI_GET16(ptr) *ACPI_CAST_PTR (UINT16, ptr)
#define ACPI_GET32(ptr) *ACPI_CAST_PTR (UINT32, ptr)
#define ACPI_GET64(ptr) *ACPI_CAST_PTR (UINT64, ptr)
#define ACPI_SET8(ptr) *ACPI_CAST_PTR (UINT8, ptr)
#define ACPI_SET16(ptr) *ACPI_CAST_PTR (UINT16, ptr)
#define ACPI_SET32(ptr) *ACPI_CAST_PTR (UINT32, ptr)
#define ACPI_SET64(ptr) *ACPI_CAST_PTR (UINT64, ptr)
/*
* printf() format helpers
*/
/* Split 64-bit integer into two 32-bit values. Use with %8.8X%8.8X */
#define ACPI_FORMAT_UINT64(i) ACPI_HIDWORD(i), ACPI_LODWORD(i)
#if ACPI_MACHINE_WIDTH == 64
#define ACPI_FORMAT_NATIVE_UINT(i) ACPI_FORMAT_UINT64(i)
#else
#define ACPI_FORMAT_NATIVE_UINT(i) 0, (i)
#endif
/*
* Macros for moving data around to/from buffers that are possibly unaligned.
* If the hardware supports the transfer of unaligned data, just do the store.
* Otherwise, we have to move one byte at a time.
*/
#ifdef ACPI_BIG_ENDIAN
/*
* Macros for big-endian machines
*/
/* These macros reverse the bytes during the move, converting little-endian to big endian */
/* Big Endian <== Little Endian */
/* Hi...Lo Lo...Hi */
/* 16-bit source, 16/32/64 destination */
#define ACPI_MOVE_16_TO_16(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[1];\
(( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[0];}
#define ACPI_MOVE_16_TO_32(d, s) {(*(UINT32 *)(void *)(d))=0;\
((UINT8 *)(void *)(d))[2] = ((UINT8 *)(void *)(s))[1];\
((UINT8 *)(void *)(d))[3] = ((UINT8 *)(void *)(s))[0];}
#define ACPI_MOVE_16_TO_64(d, s) {(*(UINT64 *)(void *)(d))=0;\
((UINT8 *)(void *)(d))[6] = ((UINT8 *)(void *)(s))[1];\
((UINT8 *)(void *)(d))[7] = ((UINT8 *)(void *)(s))[0];}
/* 32-bit source, 16/32/64 destination */
#define ACPI_MOVE_32_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */
#define ACPI_MOVE_32_TO_32(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[3];\
(( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[2];\
(( UINT8 *)(void *)(d))[2] = ((UINT8 *)(void *)(s))[1];\
(( UINT8 *)(void *)(d))[3] = ((UINT8 *)(void *)(s))[0];}
#define ACPI_MOVE_32_TO_64(d, s) {(*(UINT64 *)(void *)(d))=0;\
((UINT8 *)(void *)(d))[4] = ((UINT8 *)(void *)(s))[3];\
((UINT8 *)(void *)(d))[5] = ((UINT8 *)(void *)(s))[2];\
((UINT8 *)(void *)(d))[6] = ((UINT8 *)(void *)(s))[1];\
((UINT8 *)(void *)(d))[7] = ((UINT8 *)(void *)(s))[0];}
/* 64-bit source, 16/32/64 destination */
#define ACPI_MOVE_64_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */
#define ACPI_MOVE_64_TO_32(d, s) ACPI_MOVE_32_TO_32(d, s) /* Truncate to 32 */
#define ACPI_MOVE_64_TO_64(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[7];\
(( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[6];\
(( UINT8 *)(void *)(d))[2] = ((UINT8 *)(void *)(s))[5];\
(( UINT8 *)(void *)(d))[3] = ((UINT8 *)(void *)(s))[4];\
(( UINT8 *)(void *)(d))[4] = ((UINT8 *)(void *)(s))[3];\
(( UINT8 *)(void *)(d))[5] = ((UINT8 *)(void *)(s))[2];\
(( UINT8 *)(void *)(d))[6] = ((UINT8 *)(void *)(s))[1];\
(( UINT8 *)(void *)(d))[7] = ((UINT8 *)(void *)(s))[0];}
#else
/*
* Macros for little-endian machines
*/
#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
/* The hardware supports unaligned transfers, just do the little-endian move */
/* 16-bit source, 16/32/64 destination */
#define ACPI_MOVE_16_TO_16(d, s) *(UINT16 *)(void *)(d) = *(UINT16 *)(void *)(s)
#define ACPI_MOVE_16_TO_32(d, s) *(UINT32 *)(void *)(d) = *(UINT16 *)(void *)(s)
#define ACPI_MOVE_16_TO_64(d, s) *(UINT64 *)(void *)(d) = *(UINT16 *)(void *)(s)
/* 32-bit source, 16/32/64 destination */
#define ACPI_MOVE_32_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */
#define ACPI_MOVE_32_TO_32(d, s) *(UINT32 *)(void *)(d) = *(UINT32 *)(void *)(s)
#define ACPI_MOVE_32_TO_64(d, s) *(UINT64 *)(void *)(d) = *(UINT32 *)(void *)(s)
/* 64-bit source, 16/32/64 destination */
#define ACPI_MOVE_64_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */
#define ACPI_MOVE_64_TO_32(d, s) ACPI_MOVE_32_TO_32(d, s) /* Truncate to 32 */
#define ACPI_MOVE_64_TO_64(d, s) *(UINT64 *)(void *)(d) = *(UINT64 *)(void *)(s)
#else
/*
* The hardware does not support unaligned transfers. We must move the
* data one byte at a time. These macros work whether the source or
* the destination (or both) is/are unaligned. (Little-endian move)
*/
/* 16-bit source, 16/32/64 destination */
#define ACPI_MOVE_16_TO_16(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[0];\
(( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[1];}
#define ACPI_MOVE_16_TO_32(d, s) {(*(UINT32 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d, s);}
#define ACPI_MOVE_16_TO_64(d, s) {(*(UINT64 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d, s);}
/* 32-bit source, 16/32/64 destination */
#define ACPI_MOVE_32_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */
#define ACPI_MOVE_32_TO_32(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[0];\
(( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[1];\
(( UINT8 *)(void *)(d))[2] = ((UINT8 *)(void *)(s))[2];\
(( UINT8 *)(void *)(d))[3] = ((UINT8 *)(void *)(s))[3];}
#define ACPI_MOVE_32_TO_64(d, s) {(*(UINT64 *)(void *)(d)) = 0; ACPI_MOVE_32_TO_32(d, s);}
/* 64-bit source, 16/32/64 destination */
#define ACPI_MOVE_64_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */
#define ACPI_MOVE_64_TO_32(d, s) ACPI_MOVE_32_TO_32(d, s) /* Truncate to 32 */
#define ACPI_MOVE_64_TO_64(d, s) {(( UINT8 *)(void *)(d))[0] = ((UINT8 *)(void *)(s))[0];\
(( UINT8 *)(void *)(d))[1] = ((UINT8 *)(void *)(s))[1];\
(( UINT8 *)(void *)(d))[2] = ((UINT8 *)(void *)(s))[2];\
(( UINT8 *)(void *)(d))[3] = ((UINT8 *)(void *)(s))[3];\
(( UINT8 *)(void *)(d))[4] = ((UINT8 *)(void *)(s))[4];\
(( UINT8 *)(void *)(d))[5] = ((UINT8 *)(void *)(s))[5];\
(( UINT8 *)(void *)(d))[6] = ((UINT8 *)(void *)(s))[6];\
(( UINT8 *)(void *)(d))[7] = ((UINT8 *)(void *)(s))[7];}
#endif
#endif
/*
* Fast power-of-two math macros for non-optimized compilers
*/
#define _ACPI_DIV(value, PowerOf2) ((UINT32) ((value) >> (PowerOf2)))
#define _ACPI_MUL(value, PowerOf2) ((UINT32) ((value) << (PowerOf2)))
#define _ACPI_MOD(value, Divisor) ((UINT32) ((value) & ((Divisor) -1)))
#define ACPI_DIV_2(a) _ACPI_DIV(a, 1)
#define ACPI_MUL_2(a) _ACPI_MUL(a, 1)
#define ACPI_MOD_2(a) _ACPI_MOD(a, 2)
#define ACPI_DIV_4(a) _ACPI_DIV(a, 2)
#define ACPI_MUL_4(a) _ACPI_MUL(a, 2)
#define ACPI_MOD_4(a) _ACPI_MOD(a, 4)
#define ACPI_DIV_8(a) _ACPI_DIV(a, 3)
#define ACPI_MUL_8(a) _ACPI_MUL(a, 3)
#define ACPI_MOD_8(a) _ACPI_MOD(a, 8)
#define ACPI_DIV_16(a) _ACPI_DIV(a, 4)
#define ACPI_MUL_16(a) _ACPI_MUL(a, 4)
#define ACPI_MOD_16(a) _ACPI_MOD(a, 16)
#define ACPI_DIV_32(a) _ACPI_DIV(a, 5)
#define ACPI_MUL_32(a) _ACPI_MUL(a, 5)
#define ACPI_MOD_32(a) _ACPI_MOD(a, 32)
/*
* Rounding macros (Power of two boundaries only)
*/
#define ACPI_ROUND_DOWN(value, boundary) (((ACPI_SIZE)(value)) & \
(~(((ACPI_SIZE) boundary)-1)))
#define ACPI_ROUND_UP(value, boundary) ((((ACPI_SIZE)(value)) + \
(((ACPI_SIZE) boundary)-1)) & \
(~(((ACPI_SIZE) boundary)-1)))
/* Note: sizeof(ACPI_SIZE) evaluates to either 4 or 8 (32- vs 64-bit mode) */
#define ACPI_ROUND_DOWN_TO_32BIT(a) ACPI_ROUND_DOWN(a, 4)
#define ACPI_ROUND_DOWN_TO_64BIT(a) ACPI_ROUND_DOWN(a, 8)
#define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a) ACPI_ROUND_DOWN(a, sizeof(ACPI_SIZE))
#define ACPI_ROUND_UP_TO_32BIT(a) ACPI_ROUND_UP(a, 4)
#define ACPI_ROUND_UP_TO_64BIT(a) ACPI_ROUND_UP(a, 8)
#define ACPI_ROUND_UP_TO_NATIVE_WORD(a) ACPI_ROUND_UP(a, sizeof(ACPI_SIZE))
#define ACPI_ROUND_BITS_UP_TO_BYTES(a) ACPI_DIV_8((a) + 7)
#define ACPI_ROUND_BITS_DOWN_TO_BYTES(a) ACPI_DIV_8((a))
#define ACPI_ROUND_UP_TO_1K(a) (((a) + 1023) >> 10)
/* Generic (non-power-of-two) rounding */
#define ACPI_ROUND_UP_TO(value, boundary) (((value) + ((boundary)-1)) / (boundary))
#define ACPI_IS_MISALIGNED(value) (((ACPI_SIZE) value) & (sizeof(ACPI_SIZE)-1))
/*
* Bitmask creation
* Bit positions start at zero.
* MASK_BITS_ABOVE creates a mask starting AT the position and above
* MASK_BITS_BELOW creates a mask starting one bit BELOW the position
*/
#define ACPI_MASK_BITS_ABOVE(position) (~((ACPI_UINT64_MAX) << ((UINT32) (position))))
#define ACPI_MASK_BITS_BELOW(position) ((ACPI_UINT64_MAX) << ((UINT32) (position)))
/* Bitfields within ACPI registers */
#define ACPI_REGISTER_PREPARE_BITS(Val, Pos, Mask) ((Val << Pos) & Mask)
#define ACPI_REGISTER_INSERT_VALUE(Reg, Pos, Mask, Val) Reg = (Reg & (~(Mask))) | ACPI_REGISTER_PREPARE_BITS(Val, Pos, Mask)
#define ACPI_INSERT_BITS(Target, Mask, Source) Target = ((Target & (~(Mask))) | (Source & Mask))
/*
* An ACPI_NAMESPACE_NODE can appear in some contexts
* where a pointer to an ACPI_OPERAND_OBJECT can also
* appear. This macro is used to distinguish them.
*
* The "Descriptor" field is the first field in both structures.
*/
#define ACPI_GET_DESCRIPTOR_TYPE(d) (((ACPI_DESCRIPTOR *)(void *)(d))->Common.DescriptorType)
#define ACPI_SET_DESCRIPTOR_TYPE(d, t) (((ACPI_DESCRIPTOR *)(void *)(d))->Common.DescriptorType = t)
/*
* Macros for the master AML opcode table
*/
#if defined (ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT)
#define ACPI_OP(Name, PArgs, IArgs, ObjType, Class, Type, Flags) \
{Name, (UINT32)(PArgs), (UINT32)(IArgs), (UINT32)(Flags), ObjType, Class, Type}
#else
#define ACPI_OP(Name, PArgs, IArgs, ObjType, Class, Type, Flags) \
{(UINT32)(PArgs), (UINT32)(IArgs), (UINT32)(Flags), ObjType, Class, Type}
#endif
#define ARG_TYPE_WIDTH 5
#define ARG_1(x) ((UINT32)(x))
#define ARG_2(x) ((UINT32)(x) << (1 * ARG_TYPE_WIDTH))
#define ARG_3(x) ((UINT32)(x) << (2 * ARG_TYPE_WIDTH))
#define ARG_4(x) ((UINT32)(x) << (3 * ARG_TYPE_WIDTH))
#define ARG_5(x) ((UINT32)(x) << (4 * ARG_TYPE_WIDTH))
#define ARG_6(x) ((UINT32)(x) << (5 * ARG_TYPE_WIDTH))
#define ARGI_LIST1(a) (ARG_1(a))
#define ARGI_LIST2(a, b) (ARG_1(b)|ARG_2(a))
#define ARGI_LIST3(a, b, c) (ARG_1(c)|ARG_2(b)|ARG_3(a))
#define ARGI_LIST4(a, b, c, d) (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a))
#define ARGI_LIST5(a, b, c, d, e) (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a))
#define ARGI_LIST6(a, b, c, d, e, f) (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a))
#define ARGP_LIST1(a) (ARG_1(a))
#define ARGP_LIST2(a, b) (ARG_1(a)|ARG_2(b))
#define ARGP_LIST3(a, b, c) (ARG_1(a)|ARG_2(b)|ARG_3(c))
#define ARGP_LIST4(a, b, c, d) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d))
#define ARGP_LIST5(a, b, c, d, e) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e))
#define ARGP_LIST6(a, b, c, d, e, f) (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f))
#define GET_CURRENT_ARG_TYPE(List) (List & ((UINT32) 0x1F))
#define INCREMENT_ARG_LIST(List) (List >>= ((UINT32) ARG_TYPE_WIDTH))
/*
* Ascii error messages can be configured out
*/
#ifndef ACPI_NO_ERROR_MESSAGES
/*
* Error reporting. Callers module and line number are inserted by AE_INFO,
* the plist contains a set of parens to allow variable-length lists.
* These macros are used for both the debug and non-debug versions of the code.
*/
#define ACPI_ERROR_NAMESPACE(s, e) AcpiUtNamespaceError (AE_INFO, s, e);
#define ACPI_ERROR_METHOD(s, n, p, e) AcpiUtMethodError (AE_INFO, s, n, p, e);
#define ACPI_WARN_PREDEFINED(plist) AcpiUtPredefinedWarning plist
#define ACPI_INFO_PREDEFINED(plist) AcpiUtPredefinedInfo plist
#else
/* No error messages */
#define ACPI_ERROR_NAMESPACE(s, e)
#define ACPI_ERROR_METHOD(s, n, p, e)
#define ACPI_WARN_PREDEFINED(plist)
#define ACPI_INFO_PREDEFINED(plist)
#endif /* ACPI_NO_ERROR_MESSAGES */
/*
* Debug macros that are conditionally compiled
*/
#ifdef ACPI_DEBUG_OUTPUT
/*
* Function entry tracing
*/
#define ACPI_FUNCTION_TRACE(a) ACPI_FUNCTION_NAME(a) \
AcpiUtTrace(ACPI_DEBUG_PARAMETERS)
#define ACPI_FUNCTION_TRACE_PTR(a, b) ACPI_FUNCTION_NAME(a) \
AcpiUtTracePtr(ACPI_DEBUG_PARAMETERS, (void *)b)
#define ACPI_FUNCTION_TRACE_U32(a, b) ACPI_FUNCTION_NAME(a) \
AcpiUtTraceU32(ACPI_DEBUG_PARAMETERS, (UINT32)b)
#define ACPI_FUNCTION_TRACE_STR(a, b) ACPI_FUNCTION_NAME(a) \
AcpiUtTraceStr(ACPI_DEBUG_PARAMETERS, (char *)b)
#define ACPI_FUNCTION_ENTRY() AcpiUtTrackStackPtr()
/*
* Function exit tracing.
* WARNING: These macros include a return statement. This is usually considered
* bad form, but having a separate exit macro is very ugly and difficult to maintain.
* One of the FUNCTION_TRACE macros above must be used in conjunction with these macros
* so that "_AcpiFunctionName" is defined.
*
* Note: the DO_WHILE0 macro is used to prevent some compilers from complaining
* about these constructs.
*/
#ifdef ACPI_USE_DO_WHILE_0
#define ACPI_DO_WHILE0(a) do a while(0)
#else
#define ACPI_DO_WHILE0(a) a
#endif
#define return_VOID ACPI_DO_WHILE0 ({ \
AcpiUtExit (ACPI_DEBUG_PARAMETERS); \
return;})
/*
* There are two versions of most of the return macros. The default version is
* safer, since it avoids side-effects by guaranteeing that the argument will
* not be evaluated twice.
*
* A less-safe version of the macros is provided for optional use if the
* compiler uses excessive CPU stack (for example, this may happen in the
* debug case if code optimzation is disabled.)
*/
#ifndef ACPI_SIMPLE_RETURN_MACROS
#define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({ \
register ACPI_STATUS _s = (s); \
AcpiUtStatusExit (ACPI_DEBUG_PARAMETERS, _s); \
return (_s); })
#define return_PTR(s) ACPI_DO_WHILE0 ({ \
register void *_s = (void *) (s); \
AcpiUtPtrExit (ACPI_DEBUG_PARAMETERS, (UINT8 *) _s); \
return (_s); })
#define return_VALUE(s) ACPI_DO_WHILE0 ({ \
register UINT64 _s = (s); \
AcpiUtValueExit (ACPI_DEBUG_PARAMETERS, _s); \
return (_s); })
#define return_UINT8(s) ACPI_DO_WHILE0 ({ \
register UINT8 _s = (UINT8) (s); \
AcpiUtValueExit (ACPI_DEBUG_PARAMETERS, (UINT64) _s); \
return (_s); })
#define return_UINT32(s) ACPI_DO_WHILE0 ({ \
register UINT32 _s = (UINT32) (s); \
AcpiUtValueExit (ACPI_DEBUG_PARAMETERS, (UINT64) _s); \
return (_s); })
#else /* Use original less-safe macros */
#define return_ACPI_STATUS(s) ACPI_DO_WHILE0 ({ \
AcpiUtStatusExit (ACPI_DEBUG_PARAMETERS, (s)); \
return((s)); })
#define return_PTR(s) ACPI_DO_WHILE0 ({ \
AcpiUtPtrExit (ACPI_DEBUG_PARAMETERS, (UINT8 *) (s)); \
return((s)); })
#define return_VALUE(s) ACPI_DO_WHILE0 ({ \
AcpiUtValueExit (ACPI_DEBUG_PARAMETERS, (UINT64) (s)); \
return((s)); })
#define return_UINT8(s) return_VALUE(s)
#define return_UINT32(s) return_VALUE(s)
#endif /* ACPI_SIMPLE_RETURN_MACROS */
/* Conditional execution */
#define ACPI_DEBUG_EXEC(a) a
#define ACPI_DEBUG_ONLY_MEMBERS(a) a;
#define _VERBOSE_STRUCTURES
/* Various object display routines for debug */
#define ACPI_DUMP_STACK_ENTRY(a) AcpiExDumpOperand((a), 0)
#define ACPI_DUMP_OPERANDS(a, b ,c) AcpiExDumpOperands(a, b, c)
#define ACPI_DUMP_ENTRY(a, b) AcpiNsDumpEntry (a, b)
#define ACPI_DUMP_PATHNAME(a, b, c, d) AcpiNsDumpPathname(a, b, c, d)
#define ACPI_DUMP_BUFFER(a, b) AcpiUtDumpBuffer((UINT8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT)
#else
/*
* This is the non-debug case -- make everything go away,
* leaving no executable debug code!
*/
#define ACPI_DEBUG_EXEC(a)
#define ACPI_DEBUG_ONLY_MEMBERS(a)
#define ACPI_FUNCTION_TRACE(a)
#define ACPI_FUNCTION_TRACE_PTR(a, b)
#define ACPI_FUNCTION_TRACE_U32(a, b)
#define ACPI_FUNCTION_TRACE_STR(a, b)
#define ACPI_FUNCTION_EXIT
#define ACPI_FUNCTION_STATUS_EXIT(s)
#define ACPI_FUNCTION_VALUE_EXIT(s)
#define ACPI_FUNCTION_ENTRY()
#define ACPI_DUMP_STACK_ENTRY(a)
#define ACPI_DUMP_OPERANDS(a, b, c)
#define ACPI_DUMP_ENTRY(a, b)
#define ACPI_DUMP_TABLES(a, b)
#define ACPI_DUMP_PATHNAME(a, b, c, d)
#define ACPI_DUMP_BUFFER(a, b)
#define ACPI_DEBUG_PRINT(pl)
#define ACPI_DEBUG_PRINT_RAW(pl)
#define return_VOID return
#define return_ACPI_STATUS(s) return(s)
#define return_VALUE(s) return(s)
#define return_UINT8(s) return(s)
#define return_UINT32(s) return(s)
#define return_PTR(s) return(s)
#endif /* ACPI_DEBUG_OUTPUT */
/*
* Some code only gets executed when the debugger is built in.
* Note that this is entirely independent of whether the
* DEBUG_PRINT stuff (set by ACPI_DEBUG_OUTPUT) is on, or not.
*/
#ifdef ACPI_DEBUGGER
#define ACPI_DEBUGGER_EXEC(a) a
#else
#define ACPI_DEBUGGER_EXEC(a)
#endif
/*
* Memory allocation tracking (DEBUG ONLY)
*/
#define ACPI_MEM_PARAMETERS _COMPONENT, _AcpiModuleName, __LINE__
#ifndef ACPI_DBG_TRACK_ALLOCATIONS
/* Memory allocation */
#define ACPI_ALLOCATE(a) AcpiUtAllocate((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS)
#define ACPI_ALLOCATE_ZEROED(a) AcpiUtAllocateZeroed((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS)
#define ACPI_FREE(a) AcpiOsFree(a)
#define ACPI_MEM_TRACKING(a)
#else
/* Memory allocation */
#define ACPI_ALLOCATE(a) AcpiUtAllocateAndTrack((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS)
#define ACPI_ALLOCATE_ZEROED(a) AcpiUtAllocateZeroedAndTrack((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS)
#define ACPI_FREE(a) AcpiUtFreeAndTrack(a, ACPI_MEM_PARAMETERS)
#define ACPI_MEM_TRACKING(a) a
#endif /* ACPI_DBG_TRACK_ALLOCATIONS */
/*
* Macros used for ACPICA utilities only
*/
/* Generate a UUID */
#define ACPI_INIT_UUID(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \
(a) & 0xFF, ((a) >> 8) & 0xFF, ((a) >> 16) & 0xFF, ((a) >> 24) & 0xFF, \
(b) & 0xFF, ((b) >> 8) & 0xFF, \
(c) & 0xFF, ((c) >> 8) & 0xFF, \
(d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7)
#define ACPI_IS_OCTAL_DIGIT(d) (((char)(d) >= '0') && ((char)(d) <= '7'))
#endif /* ACMACROS_H */