| Current Path : /usr/src/sys/contrib/dev/acpica/resources/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //usr/src/sys/contrib/dev/acpica/resources/rsmisc.c |
/*******************************************************************************
*
* Module Name: rsmisc - Miscellaneous resource descriptors
*
******************************************************************************/
/*
* Copyright (C) 2000 - 2011, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#define __RSMISC_C__
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
#include <contrib/dev/acpica/include/acresrc.h>
#define _COMPONENT ACPI_RESOURCES
ACPI_MODULE_NAME ("rsmisc")
#define INIT_RESOURCE_TYPE(i) i->ResourceOffset
#define INIT_RESOURCE_LENGTH(i) i->AmlOffset
#define INIT_TABLE_LENGTH(i) i->Value
#define COMPARE_OPCODE(i) i->ResourceOffset
#define COMPARE_TARGET(i) i->AmlOffset
#define COMPARE_VALUE(i) i->Value
/*******************************************************************************
*
* FUNCTION: AcpiRsConvertAmlToResource
*
* PARAMETERS: Resource - Pointer to the resource descriptor
* Aml - Where the AML descriptor is returned
* Info - Pointer to appropriate conversion table
*
* RETURN: Status
*
* DESCRIPTION: Convert an external AML resource descriptor to the corresponding
* internal resource descriptor
*
******************************************************************************/
ACPI_STATUS
AcpiRsConvertAmlToResource (
ACPI_RESOURCE *Resource,
AML_RESOURCE *Aml,
ACPI_RSCONVERT_INFO *Info)
{
ACPI_RS_LENGTH AmlResourceLength;
void *Source;
void *Destination;
char *Target;
UINT8 Count;
UINT8 FlagsMode = FALSE;
UINT16 ItemCount = 0;
UINT16 Temp16 = 0;
ACPI_FUNCTION_TRACE (RsConvertAmlToResource);
if (((ACPI_SIZE) Resource) & 0x3)
{
/* Each internal resource struct is expected to be 32-bit aligned */
ACPI_WARNING ((AE_INFO,
"Misaligned resource pointer (get): %p Type 0x%2.2X Length %u",
Resource, Resource->Type, Resource->Length));
}
/* Extract the resource Length field (does not include header length) */
AmlResourceLength = AcpiUtGetResourceLength (Aml);
/*
* First table entry must be ACPI_RSC_INITxxx and must contain the
* table length (# of table entries)
*/
Count = INIT_TABLE_LENGTH (Info);
while (Count)
{
/*
* Source is the external AML byte stream buffer,
* destination is the internal resource descriptor
*/
Source = ACPI_ADD_PTR (void, Aml, Info->AmlOffset);
Destination = ACPI_ADD_PTR (void, Resource, Info->ResourceOffset);
switch (Info->Opcode)
{
case ACPI_RSC_INITGET:
/*
* Get the resource type and the initial (minimum) length
*/
ACPI_MEMSET (Resource, 0, INIT_RESOURCE_LENGTH (Info));
Resource->Type = INIT_RESOURCE_TYPE (Info);
Resource->Length = INIT_RESOURCE_LENGTH (Info);
break;
case ACPI_RSC_INITSET:
break;
case ACPI_RSC_FLAGINIT:
FlagsMode = TRUE;
break;
case ACPI_RSC_1BITFLAG:
/*
* Mask and shift the flag bit
*/
ACPI_SET8 (Destination) = (UINT8)
((ACPI_GET8 (Source) >> Info->Value) & 0x01);
break;
case ACPI_RSC_2BITFLAG:
/*
* Mask and shift the flag bits
*/
ACPI_SET8 (Destination) = (UINT8)
((ACPI_GET8 (Source) >> Info->Value) & 0x03);
break;
case ACPI_RSC_COUNT:
ItemCount = ACPI_GET8 (Source);
ACPI_SET8 (Destination) = (UINT8) ItemCount;
Resource->Length = Resource->Length +
(Info->Value * (ItemCount - 1));
break;
case ACPI_RSC_COUNT16:
ItemCount = AmlResourceLength;
ACPI_SET16 (Destination) = ItemCount;
Resource->Length = Resource->Length +
(Info->Value * (ItemCount - 1));
break;
case ACPI_RSC_LENGTH:
Resource->Length = Resource->Length + Info->Value;
break;
case ACPI_RSC_MOVE8:
case ACPI_RSC_MOVE16:
case ACPI_RSC_MOVE32:
case ACPI_RSC_MOVE64:
/*
* Raw data move. Use the Info value field unless ItemCount has
* been previously initialized via a COUNT opcode
*/
if (Info->Value)
{
ItemCount = Info->Value;
}
AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode);
break;
case ACPI_RSC_SET8:
ACPI_MEMSET (Destination, Info->AmlOffset, Info->Value);
break;
case ACPI_RSC_DATA8:
Target = ACPI_ADD_PTR (char, Resource, Info->Value);
ACPI_MEMCPY (Destination, Source, ACPI_GET16 (Target));
break;
case ACPI_RSC_ADDRESS:
/*
* Common handler for address descriptor flags
*/
if (!AcpiRsGetAddressCommon (Resource, Aml))
{
return_ACPI_STATUS (AE_AML_INVALID_RESOURCE_TYPE);
}
break;
case ACPI_RSC_SOURCE:
/*
* Optional ResourceSource (Index and String)
*/
Resource->Length +=
AcpiRsGetResourceSource (AmlResourceLength, Info->Value,
Destination, Aml, NULL);
break;
case ACPI_RSC_SOURCEX:
/*
* Optional ResourceSource (Index and String). This is the more
* complicated case used by the Interrupt() macro
*/
Target = ACPI_ADD_PTR (char, Resource, Info->AmlOffset + (ItemCount * 4));
Resource->Length +=
AcpiRsGetResourceSource (AmlResourceLength,
(ACPI_RS_LENGTH) (((ItemCount - 1) * sizeof (UINT32)) + Info->Value),
Destination, Aml, Target);
break;
case ACPI_RSC_BITMASK:
/*
* 8-bit encoded bitmask (DMA macro)
*/
ItemCount = AcpiRsDecodeBitmask (ACPI_GET8 (Source), Destination);
if (ItemCount)
{
Resource->Length += (ItemCount - 1);
}
Target = ACPI_ADD_PTR (char, Resource, Info->Value);
ACPI_SET8 (Target) = (UINT8) ItemCount;
break;
case ACPI_RSC_BITMASK16:
/*
* 16-bit encoded bitmask (IRQ macro)
*/
ACPI_MOVE_16_TO_16 (&Temp16, Source);
ItemCount = AcpiRsDecodeBitmask (Temp16, Destination);
if (ItemCount)
{
Resource->Length += (ItemCount - 1);
}
Target = ACPI_ADD_PTR (char, Resource, Info->Value);
ACPI_SET8 (Target) = (UINT8) ItemCount;
break;
case ACPI_RSC_EXIT_NE:
/*
* Control - Exit conversion if not equal
*/
switch (Info->ResourceOffset)
{
case ACPI_RSC_COMPARE_AML_LENGTH:
if (AmlResourceLength != Info->Value)
{
goto Exit;
}
break;
case ACPI_RSC_COMPARE_VALUE:
if (ACPI_GET8 (Source) != Info->Value)
{
goto Exit;
}
break;
default:
ACPI_ERROR ((AE_INFO, "Invalid conversion sub-opcode"));
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
break;
default:
ACPI_ERROR ((AE_INFO, "Invalid conversion opcode"));
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
Count--;
Info++;
}
Exit:
if (!FlagsMode)
{
/* Round the resource struct length up to the next boundary (32 or 64) */
Resource->Length = (UINT32) ACPI_ROUND_UP_TO_NATIVE_WORD (Resource->Length);
}
return_ACPI_STATUS (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: AcpiRsConvertResourceToAml
*
* PARAMETERS: Resource - Pointer to the resource descriptor
* Aml - Where the AML descriptor is returned
* Info - Pointer to appropriate conversion table
*
* RETURN: Status
*
* DESCRIPTION: Convert an internal resource descriptor to the corresponding
* external AML resource descriptor.
*
******************************************************************************/
ACPI_STATUS
AcpiRsConvertResourceToAml (
ACPI_RESOURCE *Resource,
AML_RESOURCE *Aml,
ACPI_RSCONVERT_INFO *Info)
{
void *Source = NULL;
void *Destination;
ACPI_RSDESC_SIZE AmlLength = 0;
UINT8 Count;
UINT16 Temp16 = 0;
UINT16 ItemCount = 0;
ACPI_FUNCTION_TRACE (RsConvertResourceToAml);
/*
* First table entry must be ACPI_RSC_INITxxx and must contain the
* table length (# of table entries)
*/
Count = INIT_TABLE_LENGTH (Info);
while (Count)
{
/*
* Source is the internal resource descriptor,
* destination is the external AML byte stream buffer
*/
Source = ACPI_ADD_PTR (void, Resource, Info->ResourceOffset);
Destination = ACPI_ADD_PTR (void, Aml, Info->AmlOffset);
switch (Info->Opcode)
{
case ACPI_RSC_INITSET:
ACPI_MEMSET (Aml, 0, INIT_RESOURCE_LENGTH (Info));
AmlLength = INIT_RESOURCE_LENGTH (Info);
AcpiRsSetResourceHeader (INIT_RESOURCE_TYPE (Info), AmlLength, Aml);
break;
case ACPI_RSC_INITGET:
break;
case ACPI_RSC_FLAGINIT:
/*
* Clear the flag byte
*/
ACPI_SET8 (Destination) = 0;
break;
case ACPI_RSC_1BITFLAG:
/*
* Mask and shift the flag bit
*/
ACPI_SET8 (Destination) |= (UINT8)
((ACPI_GET8 (Source) & 0x01) << Info->Value);
break;
case ACPI_RSC_2BITFLAG:
/*
* Mask and shift the flag bits
*/
ACPI_SET8 (Destination) |= (UINT8)
((ACPI_GET8 (Source) & 0x03) << Info->Value);
break;
case ACPI_RSC_COUNT:
ItemCount = ACPI_GET8 (Source);
ACPI_SET8 (Destination) = (UINT8) ItemCount;
AmlLength = (UINT16) (AmlLength + (Info->Value * (ItemCount - 1)));
break;
case ACPI_RSC_COUNT16:
ItemCount = ACPI_GET16 (Source);
AmlLength = (UINT16) (AmlLength + ItemCount);
AcpiRsSetResourceLength (AmlLength, Aml);
break;
case ACPI_RSC_LENGTH:
AcpiRsSetResourceLength (Info->Value, Aml);
break;
case ACPI_RSC_MOVE8:
case ACPI_RSC_MOVE16:
case ACPI_RSC_MOVE32:
case ACPI_RSC_MOVE64:
if (Info->Value)
{
ItemCount = Info->Value;
}
AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode);
break;
case ACPI_RSC_ADDRESS:
/* Set the Resource Type, General Flags, and Type-Specific Flags */
AcpiRsSetAddressCommon (Aml, Resource);
break;
case ACPI_RSC_SOURCEX:
/*
* Optional ResourceSource (Index and String)
*/
AmlLength = AcpiRsSetResourceSource (
Aml, (ACPI_RS_LENGTH) AmlLength, Source);
AcpiRsSetResourceLength (AmlLength, Aml);
break;
case ACPI_RSC_SOURCE:
/*
* Optional ResourceSource (Index and String). This is the more
* complicated case used by the Interrupt() macro
*/
AmlLength = AcpiRsSetResourceSource (Aml, Info->Value, Source);
AcpiRsSetResourceLength (AmlLength, Aml);
break;
case ACPI_RSC_BITMASK:
/*
* 8-bit encoded bitmask (DMA macro)
*/
ACPI_SET8 (Destination) = (UINT8)
AcpiRsEncodeBitmask (Source,
*ACPI_ADD_PTR (UINT8, Resource, Info->Value));
break;
case ACPI_RSC_BITMASK16:
/*
* 16-bit encoded bitmask (IRQ macro)
*/
Temp16 = AcpiRsEncodeBitmask (Source,
*ACPI_ADD_PTR (UINT8, Resource, Info->Value));
ACPI_MOVE_16_TO_16 (Destination, &Temp16);
break;
case ACPI_RSC_EXIT_LE:
/*
* Control - Exit conversion if less than or equal
*/
if (ItemCount <= Info->Value)
{
goto Exit;
}
break;
case ACPI_RSC_EXIT_NE:
/*
* Control - Exit conversion if not equal
*/
switch (COMPARE_OPCODE (Info))
{
case ACPI_RSC_COMPARE_VALUE:
if (*ACPI_ADD_PTR (UINT8, Resource,
COMPARE_TARGET (Info)) != COMPARE_VALUE (Info))
{
goto Exit;
}
break;
default:
ACPI_ERROR ((AE_INFO, "Invalid conversion sub-opcode"));
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
break;
case ACPI_RSC_EXIT_EQ:
/*
* Control - Exit conversion if equal
*/
if (*ACPI_ADD_PTR (UINT8, Resource,
COMPARE_TARGET (Info)) == COMPARE_VALUE (Info))
{
goto Exit;
}
break;
default:
ACPI_ERROR ((AE_INFO, "Invalid conversion opcode"));
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
Count--;
Info++;
}
Exit:
return_ACPI_STATUS (AE_OK);
}
#if 0
/* Previous resource validations */
if (Aml->ExtAddress64.RevisionID != AML_RESOURCE_EXTENDED_ADDRESS_REVISION)
{
return_ACPI_STATUS (AE_SUPPORT);
}
if (Resource->Data.StartDpf.PerformanceRobustness >= 3)
{
return_ACPI_STATUS (AE_AML_BAD_RESOURCE_VALUE);
}
if (((Aml->Irq.Flags & 0x09) == 0x00) ||
((Aml->Irq.Flags & 0x09) == 0x09))
{
/*
* Only [ActiveHigh, EdgeSensitive] or [ActiveLow, LevelSensitive]
* polarity/trigger interrupts are allowed (ACPI spec, section
* "IRQ Format"), so 0x00 and 0x09 are illegal.
*/
ACPI_ERROR ((AE_INFO,
"Invalid interrupt polarity/trigger in resource list, 0x%X",
Aml->Irq.Flags));
return_ACPI_STATUS (AE_BAD_DATA);
}
Resource->Data.ExtendedIrq.InterruptCount = Temp8;
if (Temp8 < 1)
{
/* Must have at least one IRQ */
return_ACPI_STATUS (AE_AML_BAD_RESOURCE_LENGTH);
}
if (Resource->Data.Dma.Transfer == 0x03)
{
ACPI_ERROR ((AE_INFO,
"Invalid DMA.Transfer preference (3)"));
return_ACPI_STATUS (AE_BAD_DATA);
}
#endif