| Current Path : /usr/src/sys/contrib/dev/acpica/tables/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //usr/src/sys/contrib/dev/acpica/tables/tbfadt.c |
/******************************************************************************
*
* Module Name: tbfadt - FADT table utilities
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2011, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#define __TBFADT_C__
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
#include <contrib/dev/acpica/include/actables.h>
#define _COMPONENT ACPI_TABLES
ACPI_MODULE_NAME ("tbfadt")
/* Local prototypes */
static ACPI_INLINE void
AcpiTbInitGenericAddress (
ACPI_GENERIC_ADDRESS *GenericAddress,
UINT8 SpaceId,
UINT8 ByteWidth,
UINT64 Address);
static void
AcpiTbConvertFadt (
void);
static void
AcpiTbValidateFadt (
void);
static void
AcpiTbSetupFadtRegisters (
void);
/* Table for conversion of FADT to common internal format and FADT validation */
typedef struct acpi_fadt_info
{
char *Name;
UINT8 Address64;
UINT8 Address32;
UINT8 Length;
UINT8 DefaultLength;
UINT8 Type;
} ACPI_FADT_INFO;
#define ACPI_FADT_REQUIRED 1
#define ACPI_FADT_SEPARATE_LENGTH 2
static ACPI_FADT_INFO FadtInfoTable[] =
{
{"Pm1aEventBlock",
ACPI_FADT_OFFSET (XPm1aEventBlock),
ACPI_FADT_OFFSET (Pm1aEventBlock),
ACPI_FADT_OFFSET (Pm1EventLength),
ACPI_PM1_REGISTER_WIDTH * 2, /* Enable + Status register */
ACPI_FADT_REQUIRED},
{"Pm1bEventBlock",
ACPI_FADT_OFFSET (XPm1bEventBlock),
ACPI_FADT_OFFSET (Pm1bEventBlock),
ACPI_FADT_OFFSET (Pm1EventLength),
ACPI_PM1_REGISTER_WIDTH * 2, /* Enable + Status register */
0},
{"Pm1aControlBlock",
ACPI_FADT_OFFSET (XPm1aControlBlock),
ACPI_FADT_OFFSET (Pm1aControlBlock),
ACPI_FADT_OFFSET (Pm1ControlLength),
ACPI_PM1_REGISTER_WIDTH,
ACPI_FADT_REQUIRED},
{"Pm1bControlBlock",
ACPI_FADT_OFFSET (XPm1bControlBlock),
ACPI_FADT_OFFSET (Pm1bControlBlock),
ACPI_FADT_OFFSET (Pm1ControlLength),
ACPI_PM1_REGISTER_WIDTH,
0},
{"Pm2ControlBlock",
ACPI_FADT_OFFSET (XPm2ControlBlock),
ACPI_FADT_OFFSET (Pm2ControlBlock),
ACPI_FADT_OFFSET (Pm2ControlLength),
ACPI_PM2_REGISTER_WIDTH,
ACPI_FADT_SEPARATE_LENGTH},
{"PmTimerBlock",
ACPI_FADT_OFFSET (XPmTimerBlock),
ACPI_FADT_OFFSET (PmTimerBlock),
ACPI_FADT_OFFSET (PmTimerLength),
ACPI_PM_TIMER_WIDTH,
ACPI_FADT_REQUIRED},
{"Gpe0Block",
ACPI_FADT_OFFSET (XGpe0Block),
ACPI_FADT_OFFSET (Gpe0Block),
ACPI_FADT_OFFSET (Gpe0BlockLength),
0,
ACPI_FADT_SEPARATE_LENGTH},
{"Gpe1Block",
ACPI_FADT_OFFSET (XGpe1Block),
ACPI_FADT_OFFSET (Gpe1Block),
ACPI_FADT_OFFSET (Gpe1BlockLength),
0,
ACPI_FADT_SEPARATE_LENGTH}
};
#define ACPI_FADT_INFO_ENTRIES \
(sizeof (FadtInfoTable) / sizeof (ACPI_FADT_INFO))
/* Table used to split Event Blocks into separate status/enable registers */
typedef struct acpi_fadt_pm_info
{
ACPI_GENERIC_ADDRESS *Target;
UINT8 Source;
UINT8 RegisterNum;
} ACPI_FADT_PM_INFO;
static ACPI_FADT_PM_INFO FadtPmInfoTable[] =
{
{&AcpiGbl_XPm1aStatus,
ACPI_FADT_OFFSET (XPm1aEventBlock),
0},
{&AcpiGbl_XPm1aEnable,
ACPI_FADT_OFFSET (XPm1aEventBlock),
1},
{&AcpiGbl_XPm1bStatus,
ACPI_FADT_OFFSET (XPm1bEventBlock),
0},
{&AcpiGbl_XPm1bEnable,
ACPI_FADT_OFFSET (XPm1bEventBlock),
1}
};
#define ACPI_FADT_PM_INFO_ENTRIES \
(sizeof (FadtPmInfoTable) / sizeof (ACPI_FADT_PM_INFO))
/*******************************************************************************
*
* FUNCTION: AcpiTbInitGenericAddress
*
* PARAMETERS: GenericAddress - GAS struct to be initialized
* SpaceId - ACPI Space ID for this register
* ByteWidth - Width of this register, in bytes
* Address - Address of the register
*
* RETURN: None
*
* DESCRIPTION: Initialize a Generic Address Structure (GAS)
* See the ACPI specification for a full description and
* definition of this structure.
*
******************************************************************************/
static ACPI_INLINE void
AcpiTbInitGenericAddress (
ACPI_GENERIC_ADDRESS *GenericAddress,
UINT8 SpaceId,
UINT8 ByteWidth,
UINT64 Address)
{
/*
* The 64-bit Address field is non-aligned in the byte packed
* GAS struct.
*/
ACPI_MOVE_64_TO_64 (&GenericAddress->Address, &Address);
/* All other fields are byte-wide */
GenericAddress->SpaceId = SpaceId;
GenericAddress->BitWidth = (UINT8) ACPI_MUL_8 (ByteWidth);
GenericAddress->BitOffset = 0;
GenericAddress->AccessWidth = 0; /* Access width ANY */
}
/*******************************************************************************
*
* FUNCTION: AcpiTbParseFadt
*
* PARAMETERS: TableIndex - Index for the FADT
*
* RETURN: None
*
* DESCRIPTION: Initialize the FADT, DSDT and FACS tables
* (FADT contains the addresses of the DSDT and FACS)
*
******************************************************************************/
void
AcpiTbParseFadt (
UINT32 TableIndex)
{
UINT32 Length;
ACPI_TABLE_HEADER *Table;
/*
* The FADT has multiple versions with different lengths,
* and it contains pointers to both the DSDT and FACS tables.
*
* Get a local copy of the FADT and convert it to a common format
* Map entire FADT, assumed to be smaller than one page.
*/
Length = AcpiGbl_RootTableList.Tables[TableIndex].Length;
Table = AcpiOsMapMemory (
AcpiGbl_RootTableList.Tables[TableIndex].Address, Length);
if (!Table)
{
return;
}
/*
* Validate the FADT checksum before we copy the table. Ignore
* checksum error as we want to try to get the DSDT and FACS.
*/
(void) AcpiTbVerifyChecksum (Table, Length);
/* Create a local copy of the FADT in common ACPI 2.0+ format */
AcpiTbCreateLocalFadt (Table, Length);
/* All done with the real FADT, unmap it */
AcpiOsUnmapMemory (Table, Length);
/* Obtain the DSDT and FACS tables via their addresses within the FADT */
AcpiTbInstallTable ((ACPI_PHYSICAL_ADDRESS) AcpiGbl_FADT.XDsdt,
ACPI_SIG_DSDT, ACPI_TABLE_INDEX_DSDT);
AcpiTbInstallTable ((ACPI_PHYSICAL_ADDRESS) AcpiGbl_FADT.XFacs,
ACPI_SIG_FACS, ACPI_TABLE_INDEX_FACS);
}
/*******************************************************************************
*
* FUNCTION: AcpiTbCreateLocalFadt
*
* PARAMETERS: Table - Pointer to BIOS FADT
* Length - Length of the table
*
* RETURN: None
*
* DESCRIPTION: Get a local copy of the FADT and convert it to a common format.
* Performs validation on some important FADT fields.
*
* NOTE: We create a local copy of the FADT regardless of the version.
*
******************************************************************************/
void
AcpiTbCreateLocalFadt (
ACPI_TABLE_HEADER *Table,
UINT32 Length)
{
/*
* Check if the FADT is larger than the largest table that we expect
* (the ACPI 2.0/3.0 version). If so, truncate the table, and issue
* a warning.
*/
if (Length > sizeof (ACPI_TABLE_FADT))
{
ACPI_WARNING ((AE_INFO,
"FADT (revision %u) is longer than ACPI 2.0 version, "
"truncating length %u to %u",
Table->Revision, Length, (UINT32) sizeof (ACPI_TABLE_FADT)));
}
/* Clear the entire local FADT */
ACPI_MEMSET (&AcpiGbl_FADT, 0, sizeof (ACPI_TABLE_FADT));
/* Copy the original FADT, up to sizeof (ACPI_TABLE_FADT) */
ACPI_MEMCPY (&AcpiGbl_FADT, Table,
ACPI_MIN (Length, sizeof (ACPI_TABLE_FADT)));
/* Convert the local copy of the FADT to the common internal format */
AcpiTbConvertFadt ();
/* Validate FADT values now, before we make any changes */
AcpiTbValidateFadt ();
/* Initialize the global ACPI register structures */
AcpiTbSetupFadtRegisters ();
}
/*******************************************************************************
*
* FUNCTION: AcpiTbConvertFadt
*
* PARAMETERS: None, uses AcpiGbl_FADT
*
* RETURN: None
*
* DESCRIPTION: Converts all versions of the FADT to a common internal format.
* Expand 32-bit addresses to 64-bit as necessary.
*
* NOTE: AcpiGbl_FADT must be of size (ACPI_TABLE_FADT),
* and must contain a copy of the actual FADT.
*
* Notes on 64-bit register addresses:
*
* After this FADT conversion, later ACPICA code will only use the 64-bit "X"
* fields of the FADT for all ACPI register addresses.
*
* The 64-bit "X" fields are optional extensions to the original 32-bit FADT
* V1.0 fields. Even if they are present in the FADT, they are optional and
* are unused if the BIOS sets them to zero. Therefore, we must copy/expand
* 32-bit V1.0 fields if the corresponding X field is zero.
*
* For ACPI 1.0 FADTs, all 32-bit address fields are expanded to the
* corresponding "X" fields in the internal FADT.
*
* For ACPI 2.0+ FADTs, all valid (non-zero) 32-bit address fields are expanded
* to the corresponding 64-bit X fields. For compatibility with other ACPI
* implementations, we ignore the 64-bit field if the 32-bit field is valid,
* regardless of whether the host OS is 32-bit or 64-bit.
*
******************************************************************************/
static void
AcpiTbConvertFadt (
void)
{
ACPI_GENERIC_ADDRESS *Address64;
UINT32 Address32;
UINT32 i;
/* Update the local FADT table header length */
AcpiGbl_FADT.Header.Length = sizeof (ACPI_TABLE_FADT);
/*
* Expand the 32-bit FACS and DSDT addresses to 64-bit as necessary.
* Later code will always use the X 64-bit field.
*/
if (!AcpiGbl_FADT.XFacs)
{
AcpiGbl_FADT.XFacs = (UINT64) AcpiGbl_FADT.Facs;
}
if (!AcpiGbl_FADT.XDsdt)
{
AcpiGbl_FADT.XDsdt = (UINT64) AcpiGbl_FADT.Dsdt;
}
/*
* For ACPI 1.0 FADTs (revision 1 or 2), ensure that reserved fields which
* should be zero are indeed zero. This will workaround BIOSs that
* inadvertently place values in these fields.
*
* The ACPI 1.0 reserved fields that will be zeroed are the bytes located
* at offset 45, 55, 95, and the word located at offset 109, 110.
*
* Note: The FADT revision value is unreliable. Only the length can be
* trusted.
*/
if (AcpiGbl_FADT.Header.Length <= ACPI_FADT_V2_SIZE)
{
AcpiGbl_FADT.PreferredProfile = 0;
AcpiGbl_FADT.PstateControl = 0;
AcpiGbl_FADT.CstControl = 0;
AcpiGbl_FADT.BootFlags = 0;
}
/*
* Expand the ACPI 1.0 32-bit addresses to the ACPI 2.0 64-bit "X"
* generic address structures as necessary. Later code will always use
* the 64-bit address structures.
*
* March 2009:
* We now always use the 32-bit address if it is valid (non-null). This
* is not in accordance with the ACPI specification which states that
* the 64-bit address supersedes the 32-bit version, but we do this for
* compatibility with other ACPI implementations. Most notably, in the
* case where both the 32 and 64 versions are non-null, we use the 32-bit
* version. This is the only address that is guaranteed to have been
* tested by the BIOS manufacturer.
*/
for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++)
{
Address32 = *ACPI_ADD_PTR (UINT32,
&AcpiGbl_FADT, FadtInfoTable[i].Address32);
Address64 = ACPI_ADD_PTR (ACPI_GENERIC_ADDRESS,
&AcpiGbl_FADT, FadtInfoTable[i].Address64);
/*
* If both 32- and 64-bit addresses are valid (non-zero),
* they must match.
*/
if (Address64->Address && Address32 &&
(Address64->Address != (UINT64) Address32))
{
ACPI_ERROR ((AE_INFO,
"32/64X address mismatch in %s: 0x%8.8X/0x%8.8X%8.8X, using 32",
FadtInfoTable[i].Name, Address32,
ACPI_FORMAT_UINT64 (Address64->Address)));
}
/* Always use 32-bit address if it is valid (non-null) */
if (Address32)
{
/*
* Copy the 32-bit address to the 64-bit GAS structure. The
* Space ID is always I/O for 32-bit legacy address fields
*/
AcpiTbInitGenericAddress (Address64, ACPI_ADR_SPACE_SYSTEM_IO,
*ACPI_ADD_PTR (UINT8, &AcpiGbl_FADT, FadtInfoTable[i].Length),
(UINT64) Address32);
}
}
}
/*******************************************************************************
*
* FUNCTION: AcpiTbValidateFadt
*
* PARAMETERS: Table - Pointer to the FADT to be validated
*
* RETURN: None
*
* DESCRIPTION: Validate various important fields within the FADT. If a problem
* is found, issue a message, but no status is returned.
* Used by both the table manager and the disassembler.
*
* Possible additional checks:
* (AcpiGbl_FADT.Pm1EventLength >= 4)
* (AcpiGbl_FADT.Pm1ControlLength >= 2)
* (AcpiGbl_FADT.PmTimerLength >= 4)
* Gpe block lengths must be multiple of 2
*
******************************************************************************/
static void
AcpiTbValidateFadt (
void)
{
char *Name;
ACPI_GENERIC_ADDRESS *Address64;
UINT8 Length;
UINT32 i;
/*
* Check for FACS and DSDT address mismatches. An address mismatch between
* the 32-bit and 64-bit address fields (FIRMWARE_CTRL/X_FIRMWARE_CTRL and
* DSDT/X_DSDT) would indicate the presence of two FACS or two DSDT tables.
*/
if (AcpiGbl_FADT.Facs &&
(AcpiGbl_FADT.XFacs != (UINT64) AcpiGbl_FADT.Facs))
{
ACPI_WARNING ((AE_INFO,
"32/64X FACS address mismatch in FADT - "
"0x%8.8X/0x%8.8X%8.8X, using 32",
AcpiGbl_FADT.Facs, ACPI_FORMAT_UINT64 (AcpiGbl_FADT.XFacs)));
AcpiGbl_FADT.XFacs = (UINT64) AcpiGbl_FADT.Facs;
}
if (AcpiGbl_FADT.Dsdt &&
(AcpiGbl_FADT.XDsdt != (UINT64) AcpiGbl_FADT.Dsdt))
{
ACPI_WARNING ((AE_INFO,
"32/64X DSDT address mismatch in FADT - "
"0x%8.8X/0x%8.8X%8.8X, using 32",
AcpiGbl_FADT.Dsdt, ACPI_FORMAT_UINT64 (AcpiGbl_FADT.XDsdt)));
AcpiGbl_FADT.XDsdt = (UINT64) AcpiGbl_FADT.Dsdt;
}
/* Examine all of the 64-bit extended address fields (X fields) */
for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++)
{
/*
* Generate pointer to the 64-bit address, get the register
* length (width) and the register name
*/
Address64 = ACPI_ADD_PTR (ACPI_GENERIC_ADDRESS,
&AcpiGbl_FADT, FadtInfoTable[i].Address64);
Length = *ACPI_ADD_PTR (UINT8,
&AcpiGbl_FADT, FadtInfoTable[i].Length);
Name = FadtInfoTable[i].Name;
/*
* For each extended field, check for length mismatch between the
* legacy length field and the corresponding 64-bit X length field.
*/
if (Address64->Address &&
(Address64->BitWidth != ACPI_MUL_8 (Length)))
{
ACPI_WARNING ((AE_INFO,
"32/64X length mismatch in %s: %u/%u",
Name, ACPI_MUL_8 (Length), Address64->BitWidth));
}
if (FadtInfoTable[i].Type & ACPI_FADT_REQUIRED)
{
/*
* Field is required (PM1aEvent, PM1aControl, PmTimer).
* Both the address and length must be non-zero.
*/
if (!Address64->Address || !Length)
{
ACPI_ERROR ((AE_INFO,
"Required field %s has zero address and/or length:"
" 0x%8.8X%8.8X/0x%X",
Name, ACPI_FORMAT_UINT64 (Address64->Address), Length));
}
}
else if (FadtInfoTable[i].Type & ACPI_FADT_SEPARATE_LENGTH)
{
/*
* Field is optional (PM2Control, GPE0, GPE1) AND has its own
* length field. If present, both the address and length must
* be valid.
*/
if ((Address64->Address && !Length) ||
(!Address64->Address && Length))
{
ACPI_WARNING ((AE_INFO,
"Optional field %s has zero address or length: "
"0x%8.8X%8.8X/0x%X",
Name, ACPI_FORMAT_UINT64 (Address64->Address), Length));
}
}
}
}
/*******************************************************************************
*
* FUNCTION: AcpiTbSetupFadtRegisters
*
* PARAMETERS: None, uses AcpiGbl_FADT.
*
* RETURN: None
*
* DESCRIPTION: Initialize global ACPI PM1 register definitions. Optionally,
* force FADT register definitions to their default lengths.
*
******************************************************************************/
static void
AcpiTbSetupFadtRegisters (
void)
{
ACPI_GENERIC_ADDRESS *Target64;
ACPI_GENERIC_ADDRESS *Source64;
UINT8 Pm1RegisterByteWidth;
UINT32 i;
/*
* Optionally check all register lengths against the default values and
* update them if they are incorrect.
*/
if (AcpiGbl_UseDefaultRegisterWidths)
{
for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++)
{
Target64 = ACPI_ADD_PTR (ACPI_GENERIC_ADDRESS, &AcpiGbl_FADT,
FadtInfoTable[i].Address64);
/*
* If a valid register (Address != 0) and the (DefaultLength > 0)
* (Not a GPE register), then check the width against the default.
*/
if ((Target64->Address) &&
(FadtInfoTable[i].DefaultLength > 0) &&
(FadtInfoTable[i].DefaultLength != Target64->BitWidth))
{
ACPI_WARNING ((AE_INFO,
"Invalid length for %s: %u, using default %u",
FadtInfoTable[i].Name, Target64->BitWidth,
FadtInfoTable[i].DefaultLength));
/* Incorrect size, set width to the default */
Target64->BitWidth = FadtInfoTable[i].DefaultLength;
}
}
}
/*
* Get the length of the individual PM1 registers (enable and status).
* Each register is defined to be (event block length / 2). Extra divide
* by 8 converts bits to bytes.
*/
Pm1RegisterByteWidth = (UINT8)
ACPI_DIV_16 (AcpiGbl_FADT.XPm1aEventBlock.BitWidth);
/*
* Calculate separate GAS structs for the PM1x (A/B) Status and Enable
* registers. These addresses do not appear (directly) in the FADT, so it
* is useful to pre-calculate them from the PM1 Event Block definitions.
*
* The PM event blocks are split into two register blocks, first is the
* PM Status Register block, followed immediately by the PM Enable
* Register block. Each is of length (Pm1EventLength/2)
*
* Note: The PM1A event block is required by the ACPI specification.
* However, the PM1B event block is optional and is rarely, if ever,
* used.
*/
for (i = 0; i < ACPI_FADT_PM_INFO_ENTRIES; i++)
{
Source64 = ACPI_ADD_PTR (ACPI_GENERIC_ADDRESS, &AcpiGbl_FADT,
FadtPmInfoTable[i].Source);
if (Source64->Address)
{
AcpiTbInitGenericAddress (FadtPmInfoTable[i].Target,
Source64->SpaceId, Pm1RegisterByteWidth,
Source64->Address +
(FadtPmInfoTable[i].RegisterNum * Pm1RegisterByteWidth));
}
}
}