| Current Path : /usr/src/sys/dev/ath/ath_hal/ar9002/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //usr/src/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c |
/*
* Copyright (c) 2008-2009 Sam Leffler, Errno Consulting
* Copyright (c) 2008 Atheros Communications, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
* $FreeBSD: release/9.1.0/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c 224644 2011-08-03 23:57:38Z adrian $
*/
#include "opt_ah.h"
#include "ah.h"
#include "ah_internal.h"
#include "ah_devid.h"
#include "ah_eeprom_v14.h" /* XXX for tx/rx gain */
#include "ar9002/ar9280.h"
#include "ar5416/ar5416reg.h"
#include "ar5416/ar5416phy.h"
#include "ar9002/ar9280v1.ini"
#include "ar9002/ar9280v2.ini"
#include "ar9002/ar9280_olc.h"
static const HAL_PERCAL_DATA ar9280_iq_cal = { /* single sample */
.calName = "IQ", .calType = IQ_MISMATCH_CAL,
.calNumSamples = MIN_CAL_SAMPLES,
.calCountMax = PER_MAX_LOG_COUNT,
.calCollect = ar5416IQCalCollect,
.calPostProc = ar5416IQCalibration
};
static const HAL_PERCAL_DATA ar9280_adc_gain_cal = { /* single sample */
.calName = "ADC Gain", .calType = ADC_GAIN_CAL,
.calNumSamples = MIN_CAL_SAMPLES,
.calCountMax = PER_MAX_LOG_COUNT,
.calCollect = ar5416AdcGainCalCollect,
.calPostProc = ar5416AdcGainCalibration
};
static const HAL_PERCAL_DATA ar9280_adc_dc_cal = { /* single sample */
.calName = "ADC DC", .calType = ADC_DC_CAL,
.calNumSamples = MIN_CAL_SAMPLES,
.calCountMax = PER_MAX_LOG_COUNT,
.calCollect = ar5416AdcDcCalCollect,
.calPostProc = ar5416AdcDcCalibration
};
static const HAL_PERCAL_DATA ar9280_adc_init_dc_cal = {
.calName = "ADC Init DC", .calType = ADC_DC_INIT_CAL,
.calNumSamples = MIN_CAL_SAMPLES,
.calCountMax = INIT_LOG_COUNT,
.calCollect = ar5416AdcDcCalCollect,
.calPostProc = ar5416AdcDcCalibration
};
static void ar9280ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore);
static HAL_BOOL ar9280FillCapabilityInfo(struct ath_hal *ah);
static void ar9280WriteIni(struct ath_hal *ah,
const struct ieee80211_channel *chan);
static void
ar9280AniSetup(struct ath_hal *ah)
{
/*
* These are the parameters from the AR5416 ANI code;
* they likely need quite a bit of adjustment for the
* AR9280.
*/
static const struct ar5212AniParams aniparams = {
.maxNoiseImmunityLevel = 4, /* levels 0..4 */
.totalSizeDesired = { -55, -55, -55, -55, -62 },
.coarseHigh = { -14, -14, -14, -14, -12 },
.coarseLow = { -64, -64, -64, -64, -70 },
.firpwr = { -78, -78, -78, -78, -80 },
.maxSpurImmunityLevel = 2,
.cycPwrThr1 = { 2, 4, 6 },
.maxFirstepLevel = 2, /* levels 0..2 */
.firstep = { 0, 4, 8 },
.ofdmTrigHigh = 500,
.ofdmTrigLow = 200,
.cckTrigHigh = 200,
.cckTrigLow = 100,
.rssiThrHigh = 40,
.rssiThrLow = 7,
.period = 100,
};
/* NB: disable ANI noise immmunity for reliable RIFS rx */
AH5416(ah)->ah_ani_function &= ~(1 << HAL_ANI_NOISE_IMMUNITY_LEVEL);
/* NB: ANI is not enabled yet */
ar5416AniAttach(ah, &aniparams, &aniparams, AH_TRUE);
}
void
ar9280InitPLL(struct ath_hal *ah, const struct ieee80211_channel *chan)
{
uint32_t pll = SM(0x5, AR_RTC_SOWL_PLL_REFDIV);
if (AR_SREV_MERLIN_20(ah) &&
chan != AH_NULL && IEEE80211_IS_CHAN_5GHZ(chan)) {
/*
* PLL WAR for Merlin 2.0/2.1
* When doing fast clock, set PLL to 0x142c
* Else, set PLL to 0x2850 to prevent reset-to-reset variation
*/
pll = IS_5GHZ_FAST_CLOCK_EN(ah, chan) ? 0x142c : 0x2850;
} else if (AR_SREV_MERLIN_10_OR_LATER(ah)) {
pll = SM(0x5, AR_RTC_SOWL_PLL_REFDIV);
if (chan != AH_NULL) {
if (IEEE80211_IS_CHAN_HALF(chan))
pll |= SM(0x1, AR_RTC_SOWL_PLL_CLKSEL);
else if (IEEE80211_IS_CHAN_QUARTER(chan))
pll |= SM(0x2, AR_RTC_SOWL_PLL_CLKSEL);
if (IEEE80211_IS_CHAN_5GHZ(chan))
pll |= SM(0x28, AR_RTC_SOWL_PLL_DIV);
else
pll |= SM(0x2c, AR_RTC_SOWL_PLL_DIV);
} else
pll |= SM(0x2c, AR_RTC_SOWL_PLL_DIV);
}
OS_REG_WRITE(ah, AR_RTC_PLL_CONTROL, pll);
OS_DELAY(RTC_PLL_SETTLE_DELAY);
OS_REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_SLEEP_DERIVED_CLK);
}
/* XXX shouldn't be here! */
#define EEP_MINOR(_ah) \
(AH_PRIVATE(_ah)->ah_eeversion & AR5416_EEP_VER_MINOR_MASK)
/*
* Attach for an AR9280 part.
*/
static struct ath_hal *
ar9280Attach(uint16_t devid, HAL_SOFTC sc,
HAL_BUS_TAG st, HAL_BUS_HANDLE sh, uint16_t *eepromdata,
HAL_STATUS *status)
{
struct ath_hal_9280 *ahp9280;
struct ath_hal_5212 *ahp;
struct ath_hal *ah;
uint32_t val;
HAL_STATUS ecode;
HAL_BOOL rfStatus;
int8_t pwr_table_offset;
uint8_t pwr;
HALDEBUG_G(AH_NULL, HAL_DEBUG_ATTACH, "%s: sc %p st %p sh %p\n",
__func__, sc, (void*) st, (void*) sh);
/* NB: memory is returned zero'd */
ahp9280 = ath_hal_malloc(sizeof (struct ath_hal_9280));
if (ahp9280 == AH_NULL) {
HALDEBUG_G(AH_NULL, HAL_DEBUG_ANY,
"%s: cannot allocate memory for state block\n", __func__);
*status = HAL_ENOMEM;
return AH_NULL;
}
ahp = AH5212(ahp9280);
ah = &ahp->ah_priv.h;
ar5416InitState(AH5416(ah), devid, sc, st, sh, status);
/* XXX override with 9280 specific state */
/* override 5416 methods for our needs */
AH5416(ah)->ah_initPLL = ar9280InitPLL;
ah->ah_setAntennaSwitch = ar9280SetAntennaSwitch;
ah->ah_configPCIE = ar9280ConfigPCIE;
AH5416(ah)->ah_cal.iqCalData.calData = &ar9280_iq_cal;
AH5416(ah)->ah_cal.adcGainCalData.calData = &ar9280_adc_gain_cal;
AH5416(ah)->ah_cal.adcDcCalData.calData = &ar9280_adc_dc_cal;
AH5416(ah)->ah_cal.adcDcCalInitData.calData = &ar9280_adc_init_dc_cal;
AH5416(ah)->ah_cal.suppCals = ADC_GAIN_CAL | ADC_DC_CAL | IQ_MISMATCH_CAL;
AH5416(ah)->ah_spurMitigate = ar9280SpurMitigate;
AH5416(ah)->ah_writeIni = ar9280WriteIni;
AH5416(ah)->ah_olcInit = ar9280olcInit;
AH5416(ah)->ah_olcTempCompensation = ar9280olcTemperatureCompensation;
AH5416(ah)->ah_setPowerCalTable = ar9280SetPowerCalTable;
AH5416(ah)->ah_rx_chainmask = AR9280_DEFAULT_RXCHAINMASK;
AH5416(ah)->ah_tx_chainmask = AR9280_DEFAULT_TXCHAINMASK;
if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON)) {
/* reset chip */
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't reset chip\n",
__func__);
ecode = HAL_EIO;
goto bad;
}
if (!ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) {
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't wakeup chip\n",
__func__);
ecode = HAL_EIO;
goto bad;
}
/* Read Revisions from Chips before taking out of reset */
val = OS_REG_READ(ah, AR_SREV);
HALDEBUG(ah, HAL_DEBUG_ATTACH,
"%s: ID 0x%x VERSION 0x%x TYPE 0x%x REVISION 0x%x\n",
__func__, MS(val, AR_XSREV_ID), MS(val, AR_XSREV_VERSION),
MS(val, AR_XSREV_TYPE), MS(val, AR_XSREV_REVISION));
/* NB: include chip type to differentiate from pre-Sowl versions */
AH_PRIVATE(ah)->ah_macVersion =
(val & AR_XSREV_VERSION) >> AR_XSREV_TYPE_S;
AH_PRIVATE(ah)->ah_macRev = MS(val, AR_XSREV_REVISION);
AH_PRIVATE(ah)->ah_ispcie = (val & AR_XSREV_TYPE_HOST_MODE) == 0;
/* setup common ini data; rf backends handle remainder */
if (AR_SREV_MERLIN_20_OR_LATER(ah)) {
HAL_INI_INIT(&ahp->ah_ini_modes, ar9280Modes_v2, 6);
HAL_INI_INIT(&ahp->ah_ini_common, ar9280Common_v2, 2);
HAL_INI_INIT(&AH5416(ah)->ah_ini_pcieserdes,
ar9280PciePhy_clkreq_always_on_L1_v2, 2);
HAL_INI_INIT(&ahp9280->ah_ini_xmodes,
ar9280Modes_fast_clock_v2, 3);
} else {
HAL_INI_INIT(&ahp->ah_ini_modes, ar9280Modes_v1, 6);
HAL_INI_INIT(&ahp->ah_ini_common, ar9280Common_v1, 2);
HAL_INI_INIT(&AH5416(ah)->ah_ini_pcieserdes,
ar9280PciePhy_v1, 2);
}
ar5416AttachPCIE(ah);
ecode = ath_hal_v14EepromAttach(ah);
if (ecode != HAL_OK)
goto bad;
if (!ar5416ChipReset(ah, AH_NULL)) { /* reset chip */
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__);
ecode = HAL_EIO;
goto bad;
}
AH_PRIVATE(ah)->ah_phyRev = OS_REG_READ(ah, AR_PHY_CHIP_ID);
if (!ar5212ChipTest(ah)) {
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: hardware self-test failed\n",
__func__);
ecode = HAL_ESELFTEST;
goto bad;
}
/*
* Set correct Baseband to analog shift
* setting to access analog chips.
*/
OS_REG_WRITE(ah, AR_PHY(0), 0x00000007);
/* Read Radio Chip Rev Extract */
AH_PRIVATE(ah)->ah_analog5GhzRev = ar5416GetRadioRev(ah);
switch (AH_PRIVATE(ah)->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR) {
case AR_RAD2133_SREV_MAJOR: /* Sowl: 2G/3x3 */
case AR_RAD5133_SREV_MAJOR: /* Sowl: 2+5G/3x3 */
break;
default:
if (AH_PRIVATE(ah)->ah_analog5GhzRev == 0) {
AH_PRIVATE(ah)->ah_analog5GhzRev =
AR_RAD5133_SREV_MAJOR;
break;
}
#ifdef AH_DEBUG
HALDEBUG(ah, HAL_DEBUG_ANY,
"%s: 5G Radio Chip Rev 0x%02X is not supported by "
"this driver\n", __func__,
AH_PRIVATE(ah)->ah_analog5GhzRev);
ecode = HAL_ENOTSUPP;
goto bad;
#endif
}
rfStatus = ar9280RfAttach(ah, &ecode);
if (!rfStatus) {
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RF setup failed, status %u\n",
__func__, ecode);
goto bad;
}
/* Enable fixup for AR_AN_TOP2 if necessary */
/*
* The v14 EEPROM layer returns HAL_EIO if PWDCLKIND isn't supported
* by the EEPROM version.
*
* ath9k checks the EEPROM minor version is >= 0x0a here, instead of
* the abstracted EEPROM access layer.
*/
ecode = ath_hal_eepromGet(ah, AR_EEP_PWDCLKIND, &pwr);
if (AR_SREV_MERLIN_20_OR_LATER(ah) && ecode == HAL_OK && pwr == 0) {
printf("[ath] enabling AN_TOP2_FIXUP\n");
AH5416(ah)->ah_need_an_top2_fixup = 1;
}
/*
* Check whether the power table offset isn't the default.
* This can occur with eeprom minor V21 or greater on Merlin.
*/
(void) ath_hal_eepromGet(ah, AR_EEP_PWR_TABLE_OFFSET, &pwr_table_offset);
if (pwr_table_offset != AR5416_PWR_TABLE_OFFSET_DB)
ath_hal_printf(ah, "[ath]: default pwr offset: %d dBm != EEPROM pwr offset: %d dBm; curves will be adjusted.\n",
AR5416_PWR_TABLE_OFFSET_DB, (int) pwr_table_offset);
/* XXX check for >= minor ver 17 */
if (AR_SREV_MERLIN_20(ah)) {
/* setup rxgain table */
switch (ath_hal_eepromGet(ah, AR_EEP_RXGAIN_TYPE, AH_NULL)) {
case AR5416_EEP_RXGAIN_13dB_BACKOFF:
HAL_INI_INIT(&ahp9280->ah_ini_rxgain,
ar9280Modes_backoff_13db_rxgain_v2, 6);
break;
case AR5416_EEP_RXGAIN_23dB_BACKOFF:
HAL_INI_INIT(&ahp9280->ah_ini_rxgain,
ar9280Modes_backoff_23db_rxgain_v2, 6);
break;
case AR5416_EEP_RXGAIN_ORIG:
HAL_INI_INIT(&ahp9280->ah_ini_rxgain,
ar9280Modes_original_rxgain_v2, 6);
break;
default:
HALASSERT(AH_FALSE);
goto bad; /* XXX ? try to continue */
}
}
/* XXX check for >= minor ver 19 */
if (AR_SREV_MERLIN_20(ah)) {
/* setp txgain table */
switch (ath_hal_eepromGet(ah, AR_EEP_TXGAIN_TYPE, AH_NULL)) {
case AR5416_EEP_TXGAIN_HIGH_POWER:
HAL_INI_INIT(&ahp9280->ah_ini_txgain,
ar9280Modes_high_power_tx_gain_v2, 6);
break;
case AR5416_EEP_TXGAIN_ORIG:
HAL_INI_INIT(&ahp9280->ah_ini_txgain,
ar9280Modes_original_tx_gain_v2, 6);
break;
default:
HALASSERT(AH_FALSE);
goto bad; /* XXX ? try to continue */
}
}
/*
* Got everything we need now to setup the capabilities.
*/
if (!ar9280FillCapabilityInfo(ah)) {
ecode = HAL_EEREAD;
goto bad;
}
ecode = ath_hal_eepromGet(ah, AR_EEP_MACADDR, ahp->ah_macaddr);
if (ecode != HAL_OK) {
HALDEBUG(ah, HAL_DEBUG_ANY,
"%s: error getting mac address from EEPROM\n", __func__);
goto bad;
}
/* XXX How about the serial number ? */
/* Read Reg Domain */
AH_PRIVATE(ah)->ah_currentRD =
ath_hal_eepromGet(ah, AR_EEP_REGDMN_0, AH_NULL);
AH_PRIVATE(ah)->ah_currentRDext =
ath_hal_eepromGet(ah, AR_EEP_REGDMN_1, AH_NULL);
/*
* ah_miscMode is populated by ar5416FillCapabilityInfo()
* starting from griffin. Set here to make sure that
* AR_MISC_MODE_MIC_NEW_LOC_ENABLE is set before a GTK is
* placed into hardware.
*/
if (ahp->ah_miscMode != 0)
OS_REG_WRITE(ah, AR_MISC_MODE, OS_REG_READ(ah, AR_MISC_MODE) | ahp->ah_miscMode);
ar9280AniSetup(ah); /* Anti Noise Immunity */
/* Setup noise floor min/max/nominal values */
AH5416(ah)->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9280_2GHZ;
AH5416(ah)->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9280_2GHZ;
AH5416(ah)->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9280_2GHZ;
AH5416(ah)->nf_5g.max = AR_PHY_CCA_MAX_GOOD_VAL_9280_5GHZ;
AH5416(ah)->nf_5g.min = AR_PHY_CCA_MIN_GOOD_VAL_9280_5GHZ;
AH5416(ah)->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_9280_5GHZ;
ar5416InitNfHistBuff(AH5416(ah)->ah_cal.nfCalHist);
HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s: return\n", __func__);
return ah;
bad:
if (ah != AH_NULL)
ah->ah_detach(ah);
if (status)
*status = ecode;
return AH_NULL;
}
static void
ar9280ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore)
{
if (AH_PRIVATE(ah)->ah_ispcie && !restore) {
ath_hal_ini_write(ah, &AH5416(ah)->ah_ini_pcieserdes, 1, 0);
OS_DELAY(1000);
OS_REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
OS_REG_WRITE(ah, AR_WA, AR9280_WA_DEFAULT);
}
}
static void
ar9280WriteIni(struct ath_hal *ah, const struct ieee80211_channel *chan)
{
u_int modesIndex, freqIndex;
int regWrites = 0;
int i;
const HAL_INI_ARRAY *ia;
/* Setup the indices for the next set of register array writes */
/* XXX Ignore 11n dynamic mode on the AR5416 for the moment */
if (IEEE80211_IS_CHAN_2GHZ(chan)) {
freqIndex = 2;
if (IEEE80211_IS_CHAN_HT40(chan))
modesIndex = 3;
else if (IEEE80211_IS_CHAN_108G(chan))
modesIndex = 5;
else
modesIndex = 4;
} else {
freqIndex = 1;
if (IEEE80211_IS_CHAN_HT40(chan) ||
IEEE80211_IS_CHAN_TURBO(chan))
modesIndex = 2;
else
modesIndex = 1;
}
/* Set correct Baseband to analog shift setting to access analog chips. */
OS_REG_WRITE(ah, AR_PHY(0), 0x00000007);
OS_REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_INTERNAL_ADDAC);
/*
* This is unwound because at the moment, there's a requirement
* for Merlin (and later, perhaps) to have a specific bit fixed
* in the AR_AN_TOP2 register before writing it.
*/
ia = &AH5212(ah)->ah_ini_modes;
#if 0
regWrites = ath_hal_ini_write(ah, &AH5212(ah)->ah_ini_modes,
modesIndex, regWrites);
#endif
HALASSERT(modesIndex < ia->cols);
for (i = 0; i < ia->rows; i++) {
uint32_t reg = HAL_INI_VAL(ia, i, 0);
uint32_t val = HAL_INI_VAL(ia, i, modesIndex);
if (reg == AR_AN_TOP2 && AH5416(ah)->ah_need_an_top2_fixup)
val &= ~AR_AN_TOP2_PWDCLKIND;
OS_REG_WRITE(ah, reg, val);
/* Analog shift register delay seems needed for Merlin - PR kern/154220 */
if (reg >= 0x7800 && reg < 0x7900)
OS_DELAY(100);
DMA_YIELD(regWrites);
}
if (AR_SREV_MERLIN_20_OR_LATER(ah)) {
regWrites = ath_hal_ini_write(ah, &AH9280(ah)->ah_ini_rxgain,
modesIndex, regWrites);
regWrites = ath_hal_ini_write(ah, &AH9280(ah)->ah_ini_txgain,
modesIndex, regWrites);
}
/* XXX Merlin 100us delay for shift registers */
regWrites = ath_hal_ini_write(ah, &AH5212(ah)->ah_ini_common,
1, regWrites);
if (AR_SREV_MERLIN_20(ah) && IS_5GHZ_FAST_CLOCK_EN(ah, chan)) {
/* 5GHz channels w/ Fast Clock use different modal values */
regWrites = ath_hal_ini_write(ah, &AH9280(ah)->ah_ini_xmodes,
modesIndex, regWrites);
}
}
#define AR_BASE_FREQ_2GHZ 2300
#define AR_BASE_FREQ_5GHZ 4900
#define AR_SPUR_FEEQ_BOUND_HT40 19
#define AR_SPUR_FEEQ_BOUND_HT20 10
void
ar9280SpurMitigate(struct ath_hal *ah, const struct ieee80211_channel *chan)
{
static const int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8,
AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60 };
static const int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10,
AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60 };
static int inc[4] = { 0, 100, 0, 0 };
int bb_spur = AR_NO_SPUR;
int freq;
int bin, cur_bin;
int bb_spur_off, spur_subchannel_sd;
int spur_freq_sd;
int spur_delta_phase;
int denominator;
int upper, lower, cur_vit_mask;
int tmp, newVal;
int i;
CHAN_CENTERS centers;
int8_t mask_m[123];
int8_t mask_p[123];
int8_t mask_amt;
int tmp_mask;
int cur_bb_spur;
HAL_BOOL is2GHz = IEEE80211_IS_CHAN_2GHZ(chan);
OS_MEMZERO(&mask_m, sizeof(int8_t) * 123);
OS_MEMZERO(&mask_p, sizeof(int8_t) * 123);
ar5416GetChannelCenters(ah, chan, ¢ers);
freq = centers.synth_center;
/*
* Need to verify range +/- 9.38 for static ht20 and +/- 18.75 for ht40,
* otherwise spur is out-of-band and can be ignored.
*/
for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) {
cur_bb_spur = ath_hal_getSpurChan(ah, i, is2GHz);
/* Get actual spur freq in MHz from EEPROM read value */
if (is2GHz) {
cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ;
} else {
cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ;
}
if (AR_NO_SPUR == cur_bb_spur)
break;
cur_bb_spur = cur_bb_spur - freq;
if (IEEE80211_IS_CHAN_HT40(chan)) {
if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) &&
(cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) {
bb_spur = cur_bb_spur;
break;
}
} else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) &&
(cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) {
bb_spur = cur_bb_spur;
break;
}
}
if (AR_NO_SPUR == bb_spur) {
#if 1
/*
* MRC CCK can interfere with beacon detection and cause deaf/mute.
* Disable MRC CCK for now.
*/
OS_REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
#else
/* Enable MRC CCK if no spur is found in this channel. */
OS_REG_SET_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
#endif
return;
} else {
/*
* For Merlin, spur can break CCK MRC algorithm. Disable CCK MRC if spur
* is found in this channel.
*/
OS_REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
}
bin = bb_spur * 320;
tmp = OS_REG_READ(ah, AR_PHY_TIMING_CTRL4_CHAIN(0));
newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI |
AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER |
AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK |
AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK);
OS_REG_WRITE(ah, AR_PHY_TIMING_CTRL4_CHAIN(0), newVal);
newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL |
AR_PHY_SPUR_REG_ENABLE_MASK_PPM |
AR_PHY_SPUR_REG_MASK_RATE_SELECT |
AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI |
SM(AR5416_SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH));
OS_REG_WRITE(ah, AR_PHY_SPUR_REG, newVal);
/* Pick control or extn channel to cancel the spur */
if (IEEE80211_IS_CHAN_HT40(chan)) {
if (bb_spur < 0) {
spur_subchannel_sd = 1;
bb_spur_off = bb_spur + 10;
} else {
spur_subchannel_sd = 0;
bb_spur_off = bb_spur - 10;
}
} else {
spur_subchannel_sd = 0;
bb_spur_off = bb_spur;
}
/*
* spur_delta_phase = bb_spur/40 * 2**21 for static ht20,
* /80 for dyn2040.
*/
if (IEEE80211_IS_CHAN_HT40(chan))
spur_delta_phase = ((bb_spur * 262144) / 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
else
spur_delta_phase = ((bb_spur * 524288) / 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
/*
* in 11A mode the denominator of spur_freq_sd should be 40 and
* it should be 44 in 11G
*/
denominator = IEEE80211_IS_CHAN_2GHZ(chan) ? 44 : 40;
spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff;
newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC |
SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) |
SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE));
OS_REG_WRITE(ah, AR_PHY_TIMING11, newVal);
/* Choose to cancel between control and extension channels */
newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S;
OS_REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal);
/*
* ============================================
* Set Pilot and Channel Masks
*
* pilot mask 1 [31:0] = +6..-26, no 0 bin
* pilot mask 2 [19:0] = +26..+7
*
* channel mask 1 [31:0] = +6..-26, no 0 bin
* channel mask 2 [19:0] = +26..+7
*/
cur_bin = -6000;
upper = bin + 100;
lower = bin - 100;
for (i = 0; i < 4; i++) {
int pilot_mask = 0;
int chan_mask = 0;
int bp = 0;
for (bp = 0; bp < 30; bp++) {
if ((cur_bin > lower) && (cur_bin < upper)) {
pilot_mask = pilot_mask | 0x1 << bp;
chan_mask = chan_mask | 0x1 << bp;
}
cur_bin += 100;
}
cur_bin += inc[i];
OS_REG_WRITE(ah, pilot_mask_reg[i], pilot_mask);
OS_REG_WRITE(ah, chan_mask_reg[i], chan_mask);
}
/* =================================================
* viterbi mask 1 based on channel magnitude
* four levels 0-3
* - mask (-27 to 27) (reg 64,0x9900 to 67,0x990c)
* [1 2 2 1] for -9.6 or [1 2 1] for +16
* - enable_mask_ppm, all bins move with freq
*
* - mask_select, 8 bits for rates (reg 67,0x990c)
* - mask_rate_cntl, 8 bits for rates (reg 67,0x990c)
* choose which mask to use mask or mask2
*/
/*
* viterbi mask 2 2nd set for per data rate puncturing
* four levels 0-3
* - mask_select, 8 bits for rates (reg 67)
* - mask (-27 to 27) (reg 98,0x9988 to 101,0x9994)
* [1 2 2 1] for -9.6 or [1 2 1] for +16
*/
cur_vit_mask = 6100;
upper = bin + 120;
lower = bin - 120;
for (i = 0; i < 123; i++) {
if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) {
if ((abs(cur_vit_mask - bin)) < 75) {
mask_amt = 1;
} else {
mask_amt = 0;
}
if (cur_vit_mask < 0) {
mask_m[abs(cur_vit_mask / 100)] = mask_amt;
} else {
mask_p[cur_vit_mask / 100] = mask_amt;
}
}
cur_vit_mask -= 100;
}
tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28)
| (mask_m[48] << 26) | (mask_m[49] << 24)
| (mask_m[50] << 22) | (mask_m[51] << 20)
| (mask_m[52] << 18) | (mask_m[53] << 16)
| (mask_m[54] << 14) | (mask_m[55] << 12)
| (mask_m[56] << 10) | (mask_m[57] << 8)
| (mask_m[58] << 6) | (mask_m[59] << 4)
| (mask_m[60] << 2) | (mask_m[61] << 0);
OS_REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask);
OS_REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask);
tmp_mask = (mask_m[31] << 28)
| (mask_m[32] << 26) | (mask_m[33] << 24)
| (mask_m[34] << 22) | (mask_m[35] << 20)
| (mask_m[36] << 18) | (mask_m[37] << 16)
| (mask_m[48] << 14) | (mask_m[39] << 12)
| (mask_m[40] << 10) | (mask_m[41] << 8)
| (mask_m[42] << 6) | (mask_m[43] << 4)
| (mask_m[44] << 2) | (mask_m[45] << 0);
OS_REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask);
OS_REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask);
tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28)
| (mask_m[18] << 26) | (mask_m[18] << 24)
| (mask_m[20] << 22) | (mask_m[20] << 20)
| (mask_m[22] << 18) | (mask_m[22] << 16)
| (mask_m[24] << 14) | (mask_m[24] << 12)
| (mask_m[25] << 10) | (mask_m[26] << 8)
| (mask_m[27] << 6) | (mask_m[28] << 4)
| (mask_m[29] << 2) | (mask_m[30] << 0);
OS_REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask);
OS_REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask);
tmp_mask = (mask_m[ 0] << 30) | (mask_m[ 1] << 28)
| (mask_m[ 2] << 26) | (mask_m[ 3] << 24)
| (mask_m[ 4] << 22) | (mask_m[ 5] << 20)
| (mask_m[ 6] << 18) | (mask_m[ 7] << 16)
| (mask_m[ 8] << 14) | (mask_m[ 9] << 12)
| (mask_m[10] << 10) | (mask_m[11] << 8)
| (mask_m[12] << 6) | (mask_m[13] << 4)
| (mask_m[14] << 2) | (mask_m[15] << 0);
OS_REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask);
OS_REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask);
tmp_mask = (mask_p[15] << 28)
| (mask_p[14] << 26) | (mask_p[13] << 24)
| (mask_p[12] << 22) | (mask_p[11] << 20)
| (mask_p[10] << 18) | (mask_p[ 9] << 16)
| (mask_p[ 8] << 14) | (mask_p[ 7] << 12)
| (mask_p[ 6] << 10) | (mask_p[ 5] << 8)
| (mask_p[ 4] << 6) | (mask_p[ 3] << 4)
| (mask_p[ 2] << 2) | (mask_p[ 1] << 0);
OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask);
OS_REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask);
tmp_mask = (mask_p[30] << 28)
| (mask_p[29] << 26) | (mask_p[28] << 24)
| (mask_p[27] << 22) | (mask_p[26] << 20)
| (mask_p[25] << 18) | (mask_p[24] << 16)
| (mask_p[23] << 14) | (mask_p[22] << 12)
| (mask_p[21] << 10) | (mask_p[20] << 8)
| (mask_p[19] << 6) | (mask_p[18] << 4)
| (mask_p[17] << 2) | (mask_p[16] << 0);
OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask);
OS_REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask);
tmp_mask = (mask_p[45] << 28)
| (mask_p[44] << 26) | (mask_p[43] << 24)
| (mask_p[42] << 22) | (mask_p[41] << 20)
| (mask_p[40] << 18) | (mask_p[39] << 16)
| (mask_p[38] << 14) | (mask_p[37] << 12)
| (mask_p[36] << 10) | (mask_p[35] << 8)
| (mask_p[34] << 6) | (mask_p[33] << 4)
| (mask_p[32] << 2) | (mask_p[31] << 0);
OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask);
OS_REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask);
tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28)
| (mask_p[59] << 26) | (mask_p[58] << 24)
| (mask_p[57] << 22) | (mask_p[56] << 20)
| (mask_p[55] << 18) | (mask_p[54] << 16)
| (mask_p[53] << 14) | (mask_p[52] << 12)
| (mask_p[51] << 10) | (mask_p[50] << 8)
| (mask_p[49] << 6) | (mask_p[48] << 4)
| (mask_p[47] << 2) | (mask_p[46] << 0);
OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask);
OS_REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
}
/*
* Fill all software cached or static hardware state information.
* Return failure if capabilities are to come from EEPROM and
* cannot be read.
*/
static HAL_BOOL
ar9280FillCapabilityInfo(struct ath_hal *ah)
{
HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
if (!ar5416FillCapabilityInfo(ah))
return AH_FALSE;
pCap->halNumGpioPins = 10;
pCap->halWowSupport = AH_TRUE;
pCap->halWowMatchPatternExact = AH_TRUE;
#if 0
pCap->halWowMatchPatternDword = AH_TRUE;
#endif
/* AR9280 is a 2x2 stream device */
pCap->halTxStreams = 2;
pCap->halRxStreams = 2;
pCap->halCSTSupport = AH_TRUE;
pCap->halRifsRxSupport = AH_TRUE;
pCap->halRifsTxSupport = AH_TRUE;
pCap->halRtsAggrLimit = 64*1024; /* 802.11n max */
pCap->halExtChanDfsSupport = AH_TRUE;
pCap->halUseCombinedRadarRssi = AH_TRUE;
#if 0
/* XXX bluetooth */
pCap->halBtCoexSupport = AH_TRUE;
#endif
pCap->halAutoSleepSupport = AH_FALSE; /* XXX? */
pCap->hal4kbSplitTransSupport = AH_FALSE;
/* Disable this so Block-ACK works correctly */
pCap->halHasRxSelfLinkedTail = AH_FALSE;
pCap->halMbssidAggrSupport = AH_TRUE;
pCap->hal4AddrAggrSupport = AH_TRUE;
if (AR_SREV_MERLIN_20(ah)) {
pCap->halPSPollBroken = AH_FALSE;
/*
* This just enables the support; it doesn't
* state 5ghz fast clock will always be used.
*/
pCap->halSupportsFastClock5GHz = AH_TRUE;
}
pCap->halRxStbcSupport = 1;
pCap->halTxStbcSupport = 1;
pCap->halEnhancedDfsSupport = AH_TRUE;
return AH_TRUE;
}
/*
* This has been disabled - having the HAL flip chainmasks on/off
* when attempting to implement 11n disrupts things. For now, just
* leave this flipped off and worry about implementing TX diversity
* for legacy and MCS0-7 when 11n is fully functioning.
*/
HAL_BOOL
ar9280SetAntennaSwitch(struct ath_hal *ah, HAL_ANT_SETTING settings)
{
#define ANTENNA0_CHAINMASK 0x1
#define ANTENNA1_CHAINMASK 0x2
#if 0
struct ath_hal_5416 *ahp = AH5416(ah);
/* Antenna selection is done by setting the tx/rx chainmasks approp. */
switch (settings) {
case HAL_ANT_FIXED_A:
/* Enable first antenna only */
ahp->ah_tx_chainmask = ANTENNA0_CHAINMASK;
ahp->ah_rx_chainmask = ANTENNA0_CHAINMASK;
break;
case HAL_ANT_FIXED_B:
/* Enable second antenna only, after checking capability */
if (AH_PRIVATE(ah)->ah_caps.halTxChainMask > ANTENNA1_CHAINMASK)
ahp->ah_tx_chainmask = ANTENNA1_CHAINMASK;
ahp->ah_rx_chainmask = ANTENNA1_CHAINMASK;
break;
case HAL_ANT_VARIABLE:
/* Restore original chainmask settings */
/* XXX */
ahp->ah_tx_chainmask = AR9280_DEFAULT_TXCHAINMASK;
ahp->ah_rx_chainmask = AR9280_DEFAULT_RXCHAINMASK;
break;
}
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: settings=%d, tx/rx chainmask=%d/%d\n",
__func__, settings, ahp->ah_tx_chainmask, ahp->ah_rx_chainmask);
#endif
return AH_TRUE;
#undef ANTENNA0_CHAINMASK
#undef ANTENNA1_CHAINMASK
}
static const char*
ar9280Probe(uint16_t vendorid, uint16_t devid)
{
if (vendorid == ATHEROS_VENDOR_ID &&
(devid == AR9280_DEVID_PCI || devid == AR9280_DEVID_PCIE))
return "Atheros 9280";
return AH_NULL;
}
AH_CHIP(AR9280, ar9280Probe, ar9280Attach);