| Current Path : /usr/src/sys/dev/isci/scil/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //usr/src/sys/dev/isci/scil/scif_sas_domain_state_handlers.c |
/*-
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/dev/isci/scil/scif_sas_domain_state_handlers.c 231689 2012-02-14 15:58:49Z jimharris $");
/**
* @file
*
* @brief This file contains all of the state handler routines for each
* of the domain states defined by the SCI_BASE_DOMAIN state
* machine.
* @note
* - The discover method must be synchronized with the
* controller's completion handler. The OS specific driver
* component is responsible for ensuring this occurs. If the
* discovery method is called from within the call
* tree of the completion routine, then no action is necessary.
*/
#include <dev/isci/scil/scic_port.h>
#include <dev/isci/scil/scic_io_request.h>
#include <dev/isci/scil/scif_sas_logger.h>
#include <dev/isci/scil/scif_sas_domain.h>
//******************************************************************************
//* P R O T E C T E D M E T H O D S
//******************************************************************************
//******************************************************************************
//* S T A R T I N G H A N D L E R S
//******************************************************************************
static
SCI_STATUS scif_sas_domain_starting_port_ready_handler(
SCI_BASE_DOMAIN_T * domain
)
{
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_DOMAIN_DISCOVERY,
"scif_sas_domain_starting_port_ready_handler(0x%x) enter\n",
domain
));
// The domain was previously completely stopped. Now that the port is
// ready we can transition the domain to the ready state.
sci_base_state_machine_change_state(
&domain->state_machine, SCI_BASE_DOMAIN_STATE_READY
);
return SCI_SUCCESS;
}
//******************************************************************************
//* R E A D Y H A N D L E R S
//******************************************************************************
/**
* @brief This method provides READY state specific handling for
* when a user attempts to discover a domain.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a discover
* operation.
*
* @return This method returns an indication of whether the discover operation
* succeeded.
* @retval SCI_SUCCESSS This value is returned when the discover operation
* begins successfully.
*/
static
SCI_STATUS scif_sas_domain_ready_discover_handler(
SCI_BASE_DOMAIN_T * domain,
U32 op_timeout,
U32 device_timeout
)
{
SCIF_SAS_DOMAIN_T * fw_domain = (SCIF_SAS_DOMAIN_T *)domain;
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_DOMAIN_DISCOVERY,
"scif_sas_domain_ready_discover_handler(0x%x, 0x%x, 0x%x) enter\n",
domain, op_timeout, device_timeout
));
fw_domain->operation.timeout = op_timeout;
fw_domain->operation.device_timeout = device_timeout;
fw_domain->operation.status = SCI_SUCCESS;
scif_cb_timer_start(
fw_domain->controller,
fw_domain->operation.timer,
fw_domain->operation.timeout
);
scif_sas_domain_transition_to_discovering_state(fw_domain);
return fw_domain->operation.status;
}
/**
* @brief This method provides READY state processing for reception of a
* port NOT ready notification from the core.
*
* @param[in] domain This parameter specifies the domain object
* on which the core port has just come ready.
*
* @return
*/
static
SCI_STATUS scif_sas_domain_ready_port_not_ready_handler(
SCI_BASE_DOMAIN_T * domain,
U32 reason_code
)
{
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_DOMAIN_DISCOVERY,
"scif_sas_domain_ready_port_not_ready_handler(0x%x, 0x%x) enter\n",
domain,
reason_code
));
if (reason_code != SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED)
{
// Change to the STOPPING state to cause existing request
// completions to be terminated and devices removed.
sci_base_state_machine_change_state(
&domain->state_machine, SCI_BASE_DOMAIN_STATE_STOPPING
);
}
return SCI_SUCCESS;
}
/**
* @brief This method provides READY state specific handling for
* when a user attempts to start an IO request.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a start IO
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a start IO
* operation.
* @param[in] io_request This parameter specifies the io request that is
* being started.
*
* @return This method returns an indication of whether the start IO
* operation succeeded.
* @retval SCI_SUCCESS This value is returned when the start IO operation
* begins successfully.
*/
static
SCI_STATUS scif_sas_domain_ready_start_io_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * io_request
)
{
SCIF_SAS_DOMAIN_T * fw_domain = (SCIF_SAS_DOMAIN_T*) domain;
SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*)
remote_device;
SCIF_SAS_REQUEST_T * fw_request = (SCIF_SAS_REQUEST_T*) io_request;
SCI_STATUS status;
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_IO_REQUEST,
"scif_sas_domain_ready_start_io_handler(0x%x, 0x%x, 0x%x) enter\n",
domain, remote_device, io_request
));
status = fw_device->state_handlers->parent.start_io_handler(
&fw_device->parent, &fw_request->parent
);
if (status == SCI_SUCCESS)
{
// Add the IO to the list of outstanding requests on the domain.
sci_fast_list_insert_tail(
&fw_domain->request_list, &fw_request->list_element
);
}
return status;
}
/**
* @brief This method provides READY state specific handling for
* when a user attempts to complete an IO request.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a complete IO
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a complete
* IO operation.
* @param[in] io_request This parameter specifies the io request that is
* being completed.
*
* @return This method returns an indication of whether the complete IO
* operation succeeded.
* @retval SCI_SUCCESS This value is returned when the complete IO operation
* is successful.
*/
static
SCI_STATUS scif_sas_domain_ready_complete_io_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * io_request
)
{
SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*)
remote_device;
SCIF_SAS_REQUEST_T * fw_request= (SCIF_SAS_REQUEST_T*) io_request;
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_IO_REQUEST,
"scif_sas_domain_ready_complete_io_handler(0x%x, 0x%x, 0x%x) enter\n",
domain, remote_device, io_request
));
// Remove the IO from the list of outstanding requests on the domain.
sci_fast_list_remove_element(&fw_request->list_element);
return fw_device->state_handlers->parent.complete_io_handler(
&fw_device->parent, &fw_request->parent
);
}
/**
* @brief This method provides READY state specific handling for
* when a user attempts to continue an IO request.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a continue IO
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a start IO
* operation.
* @param[in] io_request This parameter specifies the io request that is
* being started.
*
* @return This method returns an indication of whether the continue IO
* operation succeeded.
* @retval SCI_SUCCESS This value is returned when the continue IO operation
* begins successfully.
*/
static
SCI_STATUS scif_sas_domain_ready_continue_io_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * io_request
)
{
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_IO_REQUEST,
"scif_sas_domain_ready_continue_io_handler(0x%x, 0x%x, 0x%x) enter\n",
domain, remote_device, io_request
));
/// @todo fix return code handling.
return SCI_FAILURE;
}
/**
* @brief This method provides READY state specific handling for
* when a user attempts to start a task request.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a start task
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a start IO
* operation.
* @param[in] task_request This parameter specifies the task request that
* is being started.
*
* @return This method returns an indication of whether the start task
* operation succeeded.
* @retval SCI_SUCCESS This value is returned when the start task operation
* begins successfully.
*/
static
SCI_STATUS scif_sas_domain_ready_start_task_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * task_request
)
{
SCIF_SAS_DOMAIN_T * fw_domain = (SCIF_SAS_DOMAIN_T*) domain;
SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*)
remote_device;
SCIF_SAS_REQUEST_T * fw_request = (SCIF_SAS_REQUEST_T*) task_request;
SCI_STATUS status;
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_TASK_MANAGEMENT,
"scif_sas_domain_ready_start_task_handler(0x%x, 0x%x, 0x%x) enter\n",
domain, remote_device, task_request
));
status = fw_device->state_handlers->parent.start_task_handler(
&fw_device->parent, &fw_request->parent
);
if (status == SCI_SUCCESS)
{
// Add the task to the list of outstanding requests on the domain.
sci_fast_list_insert_tail(
&fw_domain->request_list, &fw_request->list_element
);
}
return status;
}
/**
* @brief This method provides READY state specific handling for
* when a user attempts to complete a task request.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a complete task
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a start IO
* operation.
* @param[in] task_request This parameter specifies the task request that
* is being started.
*
* @return This method returns an indication of whether the complete task
* operation succeeded.
* @retval SCI_SUCCESS This value is returned when the complete task operation
* begins successfully.
*/
static
SCI_STATUS scif_sas_domain_ready_complete_task_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * task_request
)
{
SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*)
remote_device;
SCIF_SAS_REQUEST_T * fw_request = (SCIF_SAS_REQUEST_T*) task_request;
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_TASK_MANAGEMENT,
"scif_sas_domain_ready_complete_task_handler(0x%x, 0x%x, 0x%x) enter\n",
domain, remote_device, task_request
));
// Remove the IO from the list of outstanding requests on the domain.
sci_fast_list_remove_element(&fw_request->list_element);
return fw_device->state_handlers->parent.complete_task_handler(
&fw_device->parent, &fw_request->parent
);
}
/**
* @brief This method provides READY state specific handling for when a user
* attempts to start a high priority IO request.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a start high priority
* IO operation (which is exclusively for Phy Control hard reset).
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a start
* high priority IO operation.
* @param[in] io_request This parameter specifies the io request that is
* being started.
*
* @return This method returns an indication of whether the start IO
* operation succeeded.
* @retval SCI_SUCCESS This value is returned when the start IO operation
* begins successfully.
*/
static
SCI_STATUS scif_sas_domain_ready_start_high_priority_io_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * io_request
)
{
SCIF_SAS_DOMAIN_T * fw_domain = (SCIF_SAS_DOMAIN_T*) domain;
SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*)
remote_device;
SCIF_SAS_REQUEST_T * fw_request = (SCIF_SAS_REQUEST_T*) io_request;
SCI_STATUS status;
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_IO_REQUEST,
"scif_sas_domain_ready_start_high_priority_request_handler(0x%x, 0x%x, 0x%x) enter\n",
domain, remote_device, io_request
));
status = fw_device->state_handlers->start_high_priority_io_handler(
&fw_device->parent, &fw_request->parent
);
if (status == SCI_SUCCESS)
{
// Add the IO to the list of outstanding requests on the domain.
// When domain is in READY state, this high priority io is likely
// a smp Phy Control or Discover request sent to parent device of
// a target device, which is to be Target Reset. This high priority
// IO's probably has already been added to the domain's list as a
// SCIF_SAS_TASK_REQUEST. We need to check if it is already on the
// list.
if ( ! sci_fast_list_is_on_this_list(
&fw_domain->request_list, &fw_request->list_element))
sci_fast_list_insert_tail(
&fw_domain->request_list, &fw_request->list_element
);
}
return status;
}
/**
* @brief This method provides READY state specific handling for
* when a user attempts to complete an high priroity IO request.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a complete high
* priority IO operation (which is exclusively for Phy Control
* hard reset).
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a complete
* IO operation.
* @param[in] io_request This parameter specifies the io request that is
* being completed.
*
* @return This method returns an indication of whether the complete IO
* operation succeeded.
* @retval SCI_SUCCESS This value is returned when the complete IO operation
* is successful.
*/
static
SCI_STATUS scif_sas_domain_ready_complete_high_priority_io_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * io_request,
void * response_data,
SCI_IO_STATUS completion_status
)
{
SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*)
remote_device;
SCIF_SAS_REQUEST_T * fw_request= (SCIF_SAS_REQUEST_T*) io_request;
SCIC_TRANSPORT_PROTOCOL protocol;
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_IO_REQUEST,
"scif_sas_domain_ready_complete_high_priority_io_handler(0x%x, 0x%x, 0x%x, 0x%x) enter\n",
domain, remote_device, io_request, response_data
));
protocol = scic_io_request_get_protocol(fw_request->core_object);
// If the request is an SMP HARD/LINK RESET request, then the request
// came through the task management path (partially). As a result,
// the accounting for the request is managed in the task request
// completion path. Thus, only change the domain request counter if
// the request is not an SMP target reset of some sort.
if (
(protocol != SCIC_SMP_PROTOCOL)
|| (fw_device->protocol_device.smp_device.current_activity !=
SCIF_SAS_SMP_REMOTE_DEVICE_ACTIVITY_TARGET_RESET)
)
{
sci_fast_list_remove_element(&fw_request->list_element);
}
return fw_device->state_handlers->complete_high_priority_io_handler(
&fw_device->parent, &fw_request->parent, response_data, completion_status
);
}
//******************************************************************************
//* S T O P P I N G H A N D L E R S
//******************************************************************************
static
SCI_STATUS scif_sas_domain_stopping_device_stop_complete_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device
)
{
SCIF_SAS_DOMAIN_T * fw_domain = (SCIF_SAS_DOMAIN_T *) domain;
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN,
"scif_sas_domain_stopping_device_stop_complete_handler(0x%x, 0x%x) enter\n",
domain, remote_device
));
// Attempt to transition to the stopped state.
scif_sas_domain_transition_to_stopped_state(fw_domain);
return SCI_SUCCESS;
}
/**
* @brief This method provides STOPPING state specific handling for
* when a user attempts to complete an IO request.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a complete IO
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a complete
* IO operation.
* @param[in] io_request This parameter specifies the io request that is
* being completed.
*
* @return This method returns an indication of whether the complete IO
* operation succeeded.
* @retval SCI_SUCCESS This value is returned when the complete IO operation
* is successful.
*/
static
SCI_STATUS scif_sas_domain_stopping_complete_io_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * io_request
)
{
SCIF_SAS_DOMAIN_T * fw_domain = (SCIF_SAS_DOMAIN_T *) domain;
SCI_STATUS status;
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_IO_REQUEST,
"scif_sas_domain_stopping_complete_io_handler(0x%x, 0x%x, 0x%x) enter\n",
domain, remote_device, io_request
));
status = scif_sas_domain_ready_complete_io_handler(
domain, remote_device, io_request
);
// Attempt to transition to the stopped state.
scif_sas_domain_transition_to_stopped_state(fw_domain);
return status;
}
/**
* @brief This method provides STOPPING state specific handling for
* when a user attempts to complete an IO request.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a complete IO
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a complete
* IO operation.
* @param[in] io_request This parameter specifies the io request that is
* being completed.
*
* @return This method returns an indication of whether the complete IO
* operation succeeded.
* @retval SCI_SUCCESS This value is returned when the complete IO operation
* is successful.
*/
static
SCI_STATUS scif_sas_domain_stopping_complete_high_priority_io_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * io_request,
void * response_data,
SCI_IO_STATUS completion_status
)
{
SCIF_SAS_DOMAIN_T * fw_domain = (SCIF_SAS_DOMAIN_T *) domain;
SCI_STATUS status;
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_IO_REQUEST,
"scif_sas_domain_stopping_complete_io_handler(0x%x, 0x%x, 0x%x) enter\n",
domain, remote_device, io_request
));
status = scif_sas_domain_ready_complete_high_priority_io_handler(
domain, remote_device, io_request, response_data, completion_status
);
// Attempt to transition to the stopped state.
scif_sas_domain_transition_to_stopped_state(fw_domain);
return status;
}
/**
* @brief This method provides STOPPING state specific handling for
* when a user attempts to complete a task request.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a complete task
* operation.
*
* @return This method returns an indication of whether the complete task
* operation succeeded.
* @retval SCI_SUCCESS This value is returned when the complete task operation
* begins successfully.
*/
static
SCI_STATUS scif_sas_domain_stopping_complete_task_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * task_request
)
{
SCIF_SAS_DOMAIN_T * fw_domain = (SCIF_SAS_DOMAIN_T *) domain;
SCI_STATUS status;
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_TASK_MANAGEMENT,
"scif_sas_domain_stopping_complete_task_handler(0x%x, 0x%x, 0x%x) enter\n",
domain, remote_device, task_request
));
status = scif_sas_domain_ready_complete_task_handler(
domain, remote_device, task_request
);
// Attempt to transition to the stopped state.
scif_sas_domain_transition_to_stopped_state(fw_domain);
return SCI_SUCCESS;
}
//******************************************************************************
//* D I S C O V E R I N G H A N D L E R S
//******************************************************************************
/**
* @brief This method provides DISCOVERING state specific processing for
* reception of a port NOT ready notification from the core. A port
* NOT ready notification forces the discovery operation to complete
* in error. Additionally, all IOs are aborted and devices removed.
*
* @param[in] domain This parameter specifies the domain object
* for which the core port is no longer ready.
*
* @return
*/
static
SCI_STATUS scif_sas_domain_discovering_port_not_ready_handler(
SCI_BASE_DOMAIN_T * domain,
U32 reason_code
)
{
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_DOMAIN_DISCOVERY,
"scif_sas_domain_discovering_port_not_ready_handler(0x%x, 0x%x) enter\n",
domain,
reason_code
));
// Change to the STOPPING state to cause existing request
// completions to be terminated and devices removed.
sci_base_state_machine_change_state(
&domain->state_machine, SCI_BASE_DOMAIN_STATE_STOPPING
);
return SCI_SUCCESS;
}
static
SCI_STATUS scif_sas_domain_discovering_device_start_complete_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device
)
{
SCIF_SAS_DOMAIN_T * fw_domain = (SCIF_SAS_DOMAIN_T *)domain;
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_DOMAIN_DISCOVERY,
"scif_sas_domain_discovering_device_start_complete_handler(0x%x) enter\n",
domain, remote_device
));
//domain will decide what's next step.
scif_sas_domain_continue_discover(fw_domain);
return SCI_SUCCESS;
}
// ---------------------------------------------------------------------------
static
SCI_STATUS scif_sas_domain_discovering_device_stop_complete_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device
)
{
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_DOMAIN_DISCOVERY,
"scif_sas_domain_discovering_device_stop_complete_handler(0x%x) enter\n",
domain, remote_device
));
return SCI_FAILURE;
}
/**
* @brief This method provides DISCOVERING state specific handling for when a user
* attempts to start a high priority IO request.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a start IO
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a start IO
* operation.
* @param[in] io_request This parameter specifies the io request that is
* being started.
*
* @return This method returns an indication of whether the start IO
* operation succeeded.
* @retval SCI_SUCCESS This value is returned when the start IO operation
* begins successfully.
*/
static
SCI_STATUS scif_sas_domain_discovering_start_high_priority_io_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * io_request
)
{
SCIF_SAS_DOMAIN_T * fw_domain = (SCIF_SAS_DOMAIN_T*) domain;
SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*)
remote_device;
SCIF_SAS_REQUEST_T * fw_request = (SCIF_SAS_REQUEST_T*) io_request;
SCI_STATUS status;
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_IO_REQUEST,
"scif_sas_domain_discovery_start_high_priority_request_handler(0x%x, 0x%x, 0x%x) enter\n",
domain, remote_device, io_request
));
status = fw_device->state_handlers->start_high_priority_io_handler(
&fw_device->parent, &fw_request->parent
);
if (status == SCI_SUCCESS)
{
// Add the IO to the list of outstanding requests on the domain.
// It is possible this high priority IO's has already been added to
// the domain's list as a SCIF_SAS_TASK_REQUEST. We need to check
// if it is already on the list.
if ( ! sci_fast_list_is_on_this_list(
&fw_domain->request_list, &fw_request->list_element))
sci_fast_list_insert_tail(
&fw_domain->request_list, &fw_request->list_element
);
}
return status;
}
/**
* @brief This method provides DISCOVERING state specific handling for
* when a user attempts to complete an IO request. User IOs are
* allowed to be completed during discovery.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a complete IO
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a complete
* IO operation.
* @param[in] io_request This parameter specifies the io request that is
* being completed.
*
* @return This method returns an indication of whether the complete IO
* operation succeeded.
* @retval SCI_SUCCESS This value is returned when the complete IO operation
* is successful.
*/
static
SCI_STATUS scif_sas_domain_discovering_complete_io_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * io_request
)
{
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_IO_REQUEST,
"scif_sas_domain_discovering_complete_io_handler(0x%x, 0x%x, 0x%x) enter\n",
domain, remote_device, io_request
));
return scif_sas_domain_ready_complete_io_handler(
domain, remote_device, io_request
);
}
/**
* @brief This method provides DISCOVERING state specific handling for
* when a user attempts to complete an high priroity IO request. User
* IOs are allowed to be completed during discovery.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a complete IO
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a complete
* IO operation.
* @param[in] io_request This parameter specifies the io request that is
* being completed.
*
* @return This method returns an indication of whether the complete IO
* operation succeeded.
* @retval SCI_SUCCESS This value is returned when the complete IO operation
* is successful.
*/
static
SCI_STATUS scif_sas_domain_discovering_complete_high_priority_io_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * io_request,
void * response_data,
SCI_IO_STATUS completion_status
)
{
SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*)
remote_device;
SCIF_SAS_REQUEST_T * fw_request= (SCIF_SAS_REQUEST_T*) io_request;
SCIC_TRANSPORT_PROTOCOL protocol;
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_IO_REQUEST,
"scif_sas_domain_discovering_complete_high_priority_io_handler(0x%x, 0x%x, 0x%x, 0x%x) enter\n",
domain, remote_device, io_request, response_data
));
protocol = scic_io_request_get_protocol(fw_request->core_object);
// Remove the IO from the list of outstanding requests on the domain.
// If the request is an SMP HARD/LINK RESET request, then the request
// came through the task management path (partially). As a result,
// the accounting for the request is managed in the task request
// completion path. Thus, only change the domain request counter if
// the request is not an SMP target reset of some sort.
if (
(protocol != SCIC_SMP_PROTOCOL)
|| (fw_device->protocol_device.smp_device.current_activity !=
SCIF_SAS_SMP_REMOTE_DEVICE_ACTIVITY_TARGET_RESET)
)
{
sci_fast_list_remove_element(&fw_request->list_element);
}
return fw_device->state_handlers->complete_high_priority_io_handler(
&fw_device->parent, &fw_request->parent, response_data, completion_status
);
}
/**
* @brief This method provides DISCOVERING state specific handling for
* when the framework attempts to complete an IO request. Internal
* Framework IOs allowed to be continued during discovery.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a continue IO
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a continue
* IO operation.
* @param[in] io_request This parameter specifies the io request that is
* being continued.
*
* @return This method returns an indication of whether the continue IO
* operation succeeded.
* @retval SCI_SUCCESS This value is returned when the continue IO operation
* is successful.
*/
static
SCI_STATUS scif_sas_domain_discovering_continue_io_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * io_request
)
{
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_IO_REQUEST,
"scif_sas_domain_discovering_continue_io_handler(0x%x, 0x%x, 0x%x) enter\n",
domain, remote_device, io_request
));
/// @todo fix return code handling.
return SCI_FAILURE;
}
/**
* @brief This method provides handling when a user attempts to start
* a task on a domain in DISCOVER state, only hard reset is allowed.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a start task
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a start IO
* operation.
* @param[in] task_request This parameter specifies the task request that
* is being started.
*
* @return This method returns a status of start task operations
* @retval SCI_FAILURE_INVALID_STATE This value is returned for any tasks,
* except for HARD RESET.
*/
static
SCI_STATUS scif_sas_domain_discovering_start_task_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * task_request
)
{
SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*)
remote_device;
SCIF_SAS_TASK_REQUEST_T * fw_task = (SCIF_SAS_TASK_REQUEST_T*)task_request;
//Only let target reset go through.
if (scif_sas_task_request_get_function(fw_task)
== SCI_SAS_HARD_RESET)
{
//If the domain is in the middle of smp DISCOVER process,
//interrupt it. After target reset is done, resume the smp DISCOVERY.
scif_sas_domain_cancel_smp_activities(fw_device->domain);
return scif_sas_domain_ready_start_task_handler(domain, remote_device, task_request);
}
else{
SCIF_LOG_WARNING((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN,
"Domain:0x%x Device:0x%x State:0x%x start task message invalid\n",
domain, remote_device,
sci_base_state_machine_get_state(&domain->state_machine)
));
return SCI_FAILURE_INVALID_STATE;
}
}
/**
* @brief This method provides DISCOVERING state specific handling for
* when a user attempts to complete a task request. User task
* management requests are allowed to be completed during discovery.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a complete IO
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a complete
* IO operation.
* @param[in] task_request This parameter specifies the task request that
* is being completed.
*
* @return This method returns an indication of whether the complete task
* management operation succeeded.
* @retval SCI_SUCCESS This value is returned when the complete task request
* is successful.
*/
static
SCI_STATUS scif_sas_domain_discovering_complete_task_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * task_request
)
{
SCI_STATUS status;
SCIF_LOG_TRACE((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_TASK_MANAGEMENT,
"scif_sas_domain_discovering_complete_task_handler(0x%x, 0x%x, 0x%x) enter\n",
domain, remote_device, task_request
));
status = scif_sas_domain_ready_complete_task_handler(
domain, remote_device, task_request
);
return status;
}
//******************************************************************************
//* D E F A U L T H A N D L E R S
//******************************************************************************
/**
* @brief This method provides default handling (i.e. returns an error)
* when a user attempts to discover a domain and a discovery
* operation is not allowed.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform an discover
* operation.
* @param[in] op_timeout This parameter specifies the timeout
* (in milliseconds) for the entire discovery operation.
* This timeout value should be some multiple of the
* individual device_timeout value.
* @param[in] device_timeout This parameter specifies the timeout
* (in milliseconds) for an individual device being discovered
* and configured during this operation.
*
* @return This method returns an indication that discovery operations
* are not allowed.
* @retval SCI_FAILURE_INVALID_STATE This value is always returned.
*/
static
SCI_STATUS scif_sas_domain_default_discover_handler(
SCI_BASE_DOMAIN_T * domain,
U32 op_timeout,
U32 device_timeout
)
{
SCIF_LOG_WARNING((
sci_base_object_get_logger((SCIF_SAS_DOMAIN_T *)domain),
SCIF_LOG_OBJECT_DOMAIN | SCIF_LOG_OBJECT_DOMAIN_DISCOVERY,
"Domain:0x%x State:0x%x requested to discover in invalid state\n",
domain,
sci_base_state_machine_get_state(&domain->state_machine)
));
return SCI_FAILURE_INVALID_STATE;
}
/**
* @brief This method provides default processing for reception of a port
* ready notification from the core.
*
* @param[in] domain This parameter specifies the domain object
* on which the core port has just come ready.
*
* @return
*/
static
SCI_STATUS scif_sas_domain_default_port_ready_handler(
SCI_BASE_DOMAIN_T * domain
)
{
SCIF_LOG_INFO((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN,
"Domain:0x%x State:0x%x port now ready\n",
domain,
sci_base_state_machine_get_state(&domain->state_machine)
));
return SCI_SUCCESS;
}
/**
* @brief This method provides default processing for reception of a port
* NOT ready notification from the core.
*
* @param[in] domain This parameter specifies the domain object
* on which the core port has just come ready.
*
* @return
*/
static
SCI_STATUS scif_sas_domain_default_port_not_ready_handler(
SCI_BASE_DOMAIN_T * domain,
U32 reason_code
)
{
SCIF_LOG_WARNING((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN,
"Domain:0x%x State:0x%x Port Not Ready 0x%x in invalid state\n",
domain,
sci_base_state_machine_get_state(&domain->state_machine),
reason_code
));
return SCI_FAILURE_INVALID_STATE;
}
/**
* @brief This method provides default handling (i.e. returns an error)
* when a user attempts to start an IO on a domain and a start
* IO operation is not allowed.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a start IO
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a start IO
* operation.
* @param[in] io_request This parameter specifies the io request that is
* being started.
*
* @return This method returns an indication that start IO operations
* are not allowed.
* @retval SCI_FAILURE_INVALID_STATE This value is always returned.
*/
static
SCI_STATUS scif_sas_domain_default_start_io_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * io_request
)
{
SCIF_LOG_WARNING((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN,
"Domain:0x%x Device:0x%x State:0x%x start IO message invalid\n",
domain, remote_device,
sci_base_state_machine_get_state(&domain->state_machine)
));
return SCI_FAILURE_INVALID_STATE;
}
/**
* @brief This method provides default handling (i.e. returns an error)
* when a user attempts to complete an IO on a domain and a
* complete IO operation is not allowed.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a complete IO
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a complete IO
* operation.
* @param[in] io_request This parameter specifies the io request that is
* being completed.
*
* @return This method returns an indication that complete IO operations
* are not allowed.
* @retval SCI_FAILURE_INVALID_STATE This value is always returned.
*/
static
SCI_STATUS scif_sas_domain_default_complete_io_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * io_request
)
{
SCIF_LOG_WARNING((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN,
"Domain:0x%x Device:0x%x State:0x%x complete IO message invalid\n",
domain, remote_device,
sci_base_state_machine_get_state(&domain->state_machine)
));
return SCI_FAILURE_INVALID_STATE;
}
/**
* @brief This method provides default handling (i.e. returns an error)
* when a user attempts to complete an IO on a domain and a
* complete IO operation is not allowed.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a complete IO
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a complete IO
* operation.
* @param[in] io_request This parameter specifies the io request that is
* being completed.
*
* @return This method returns an indication that complete IO operations
* are not allowed.
* @retval SCI_FAILURE_INVALID_STATE This value is always returned.
*/
static
SCI_STATUS scif_sas_domain_default_complete_high_priority_io_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * io_request,
void * response_data,
SCI_IO_STATUS completion_status
)
{
SCIF_LOG_WARNING((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN,
"Domain:0x%x Device:0x%x State:0x%x complete IO message invalid\n",
domain, remote_device,
sci_base_state_machine_get_state(&domain->state_machine)
));
return SCI_FAILURE_INVALID_STATE;
}
/**
* @brief This method provides default handling (i.e. returns an error)
* when a user attempts to continue an IO on a domain and a
* continue IO operation is not allowed.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a continue IO
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a start IO
* operation.
* @param[in] io_request This parameter specifies the io request that is
* being started.
*
* @return This method returns an indication that continue IO operations
* are not allowed.
* @retval SCI_FAILURE_INVALID_STATE This value is always returned.
*/
static
SCI_STATUS scif_sas_domain_default_continue_io_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * io_request
)
{
SCIF_LOG_WARNING((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN,
"Domain:0x%x Device:0x%x State:0x%x contineu IO message invalid\n",
domain, remote_device,
sci_base_state_machine_get_state(&domain->state_machine)
));
return SCI_FAILURE_INVALID_STATE;
}
/**
* @brief This method provides default handling (i.e. returns an error)
* when a user attempts to start a task on a domain and a start
* task operation is not allowed.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a start task
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a start IO
* operation.
* @param[in] task_request This parameter specifies the task request that
* is being started.
*
* @return This method returns an indication that start task operations
* are not allowed.
* @retval SCI_FAILURE_INVALID_STATE This value is always returned.
*/
static
SCI_STATUS scif_sas_domain_default_start_task_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * task_request
)
{
SCIF_LOG_WARNING((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN,
"Domain:0x%x Device:0x%x State:0x%x start task message invalid\n",
domain, remote_device,
sci_base_state_machine_get_state(&domain->state_machine)
));
return SCI_FAILURE_INVALID_STATE;
}
/**
* @brief This method provides default handling (i.e. returns an error)
* when a user attempts to complete a task on a domain and a
* complete task operation is not allowed.
*
* @param[in] domain This parameter specifies the domain object
* on which the user is attempting to perform a complete task
* operation.
* @param[in] remote_device This parameter specifies the remote device
* object on which the user is attempting to perform a start IO
* operation.
* @param[in] task_request This parameter specifies the task request that
* is being started.
*
* @return This method returns an indication that complete task operations
* are not allowed.
* @retval SCI_FAILURE_INVALID_STATE This value is always returned.
*/
static
SCI_STATUS scif_sas_domain_default_complete_task_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device,
SCI_BASE_REQUEST_T * task_request
)
{
SCIF_LOG_WARNING((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN,
"Domain:0x%x Device:0x%x State:0x%x complete task message invalid\n",
domain, remote_device,
sci_base_state_machine_get_state(&domain->state_machine)
));
return SCI_FAILURE_INVALID_STATE;
}
/**
* @brief This method provides default handling (i.e. returns an error)
* when a remote device start operation completes in a state.
*
* @param[in] domain This parameter specifies the domain object
* on which the remote device start operation is completing.
* @param[in] remote_device This parameter specifies the remote device
* for which the start operation is completing.
*
* @return This method returns an indication that start operation
* completion is not allowed.
* @retval SCI_FAILURE_INVALID_STATE This value is always returned.
*/
static
SCI_STATUS scif_sas_domain_default_device_start_complete_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device
)
{
SCIF_LOG_WARNING((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN,
"Domain:0x%x Device:0x%x State:0x%x device stop complete message invalid\n",
domain, remote_device,
sci_base_state_machine_get_state(&domain->state_machine)
));
return SCI_FAILURE_INVALID_STATE;
}
/**
* @brief This method provides default handling (i.e. returns an error)
* when a remote device stop operation completes in a state.
*
* @param[in] domain This parameter specifies the domain object
* on which the remote device stop operation is completing.
* @param[in] remote_device This parameter specifies the remote device
* for which the stop operation is completing.
*
* @return This method returns an indication that stop operation
* completion is not allowed.
* @retval SCI_FAILURE_INVALID_STATE This value is always returned.
*/
static
SCI_STATUS scif_sas_domain_default_device_stop_complete_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device
)
{
SCIF_LOG_WARNING((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN,
"Domain:0x%x Device:0x%x State:0x%x device stop complete message invalid\n",
domain, remote_device,
sci_base_state_machine_get_state(&domain->state_machine)
));
return SCI_FAILURE_INVALID_STATE;
}
/**
* @brief This method provides default handling (i.e. returns an error)
* when sci user try to destruct a remote device of this domain.
*
* @param[in] domain This parameter specifies the domain object
* on which the remote device is to be destructed.
* @param[in] remote_device This parameter specifies the remote device
* to be destructed.
*
* @return This method returns an indication that device destruction
* is not allowed.
* @retval SCI_FAILURE_INVALID_STATE This value is always returned.
*/
static
SCI_STATUS scif_sas_domain_default_device_destruct_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device
)
{
SCIF_LOG_WARNING((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN,
"Domain:0x%x Device:0x%x State:0x%x device destruct in invalid state\n",
domain, remote_device,
sci_base_state_machine_get_state(&domain->state_machine)
));
return SCI_FAILURE_INVALID_STATE;
}
/**
* @brief This method provides handling when sci user destruct a remote
* device of this domain in discovering state. Mainly the device
* is removed from domain's remote_device_list.
*
* @param[in] domain This parameter specifies the domain object
* on which the remote device is to be destructed.
* @param[in] remote_device This parameter specifies the remote device
* to be destructed.
*
* @return This method returns a status of the device destruction.
* @retval SCI_SUCCESS This value is returned when a remote device is
* successfully removed from domain.
*/
static
SCI_STATUS scif_sas_domain_discovering_device_destruct_handler(
SCI_BASE_DOMAIN_T * domain,
SCI_BASE_REMOTE_DEVICE_T * remote_device
)
{
SCIF_SAS_DOMAIN_T * fw_domain = (SCIF_SAS_DOMAIN_T *)domain;
SCIF_LOG_WARNING((
sci_base_object_get_logger(domain),
SCIF_LOG_OBJECT_DOMAIN,
"Domain:0x%x Device:0x%x State:0x%x device destruct in domain DISCOVERING state\n",
domain, remote_device,
sci_base_state_machine_get_state(&domain->state_machine)
));
//remove the remote device from domain's remote_device_list
sci_abstract_list_erase(
&(fw_domain->remote_device_list),
remote_device
);
return SCI_SUCCESS;
}
#define scif_sas_domain_stopped_discover_handler \
scif_sas_domain_ready_discover_handler
#define scif_sas_domain_default_start_high_priority_io_handler \
scif_sas_domain_default_start_io_handler
SCI_BASE_DOMAIN_STATE_HANDLER_T
scif_sas_domain_state_handler_table[SCI_BASE_DOMAIN_MAX_STATES] =
{
// SCI_BASE_DOMAIN_STATE_INITIAL
{
scif_sas_domain_default_discover_handler,
scif_sas_domain_default_port_ready_handler,
scif_sas_domain_default_port_not_ready_handler,
scif_sas_domain_default_device_start_complete_handler,
scif_sas_domain_default_device_stop_complete_handler,
scif_sas_domain_default_device_destruct_handler,
scif_sas_domain_default_start_io_handler,
scif_sas_domain_default_start_high_priority_io_handler,
scif_sas_domain_default_complete_io_handler,
scif_sas_domain_default_complete_high_priority_io_handler,
scif_sas_domain_default_continue_io_handler,
scif_sas_domain_default_start_task_handler,
scif_sas_domain_default_complete_task_handler
},
// SCI_BASE_DOMAIN_STATE_STARTING
{
scif_sas_domain_default_discover_handler,
scif_sas_domain_starting_port_ready_handler,
scif_sas_domain_default_port_not_ready_handler,
scif_sas_domain_default_device_start_complete_handler,
scif_sas_domain_default_device_stop_complete_handler,
scif_sas_domain_default_device_destruct_handler,
scif_sas_domain_default_start_io_handler,
scif_sas_domain_default_start_high_priority_io_handler,
scif_sas_domain_default_complete_io_handler,
scif_sas_domain_default_complete_high_priority_io_handler,
scif_sas_domain_default_continue_io_handler,
scif_sas_domain_default_start_task_handler,
scif_sas_domain_default_complete_task_handler
},
// SCI_BASE_DOMAIN_STATE_READY
{
scif_sas_domain_ready_discover_handler,
scif_sas_domain_default_port_ready_handler,
scif_sas_domain_ready_port_not_ready_handler,
scif_sas_domain_default_device_start_complete_handler,
scif_sas_domain_default_device_stop_complete_handler,
scif_sas_domain_default_device_destruct_handler,
scif_sas_domain_ready_start_io_handler,
scif_sas_domain_ready_start_high_priority_io_handler,
scif_sas_domain_ready_complete_io_handler,
scif_sas_domain_ready_complete_high_priority_io_handler,
scif_sas_domain_ready_continue_io_handler,
scif_sas_domain_ready_start_task_handler,
scif_sas_domain_ready_complete_task_handler
},
// SCI_BASE_DOMAIN_STATE_STOPPING
{
scif_sas_domain_default_discover_handler,
scif_sas_domain_default_port_ready_handler,
scif_sas_domain_default_port_not_ready_handler,
scif_sas_domain_default_device_start_complete_handler,
scif_sas_domain_stopping_device_stop_complete_handler,
scif_sas_domain_default_device_destruct_handler,
scif_sas_domain_default_start_io_handler,
scif_sas_domain_default_start_high_priority_io_handler,
scif_sas_domain_stopping_complete_io_handler,
scif_sas_domain_stopping_complete_high_priority_io_handler,
scif_sas_domain_default_continue_io_handler,
scif_sas_domain_default_start_task_handler,
scif_sas_domain_stopping_complete_task_handler
},
// SCI_BASE_DOMAIN_STATE_STOPPED
{
scif_sas_domain_stopped_discover_handler,
scif_sas_domain_default_port_ready_handler,
scif_sas_domain_default_port_not_ready_handler,
scif_sas_domain_default_device_start_complete_handler,
scif_sas_domain_default_device_stop_complete_handler,
scif_sas_domain_default_device_destruct_handler,
scif_sas_domain_default_start_io_handler,
scif_sas_domain_default_start_high_priority_io_handler,
scif_sas_domain_default_complete_io_handler,
scif_sas_domain_default_complete_high_priority_io_handler,
scif_sas_domain_default_continue_io_handler,
scif_sas_domain_default_start_task_handler,
scif_sas_domain_default_complete_task_handler
},
// SCI_BASE_DOMAIN_STATE_DISCOVERING
{
scif_sas_domain_default_discover_handler,
scif_sas_domain_default_port_ready_handler,
scif_sas_domain_discovering_port_not_ready_handler,
scif_sas_domain_discovering_device_start_complete_handler,
scif_sas_domain_discovering_device_stop_complete_handler,
scif_sas_domain_discovering_device_destruct_handler, //
scif_sas_domain_default_start_io_handler,
scif_sas_domain_discovering_start_high_priority_io_handler,
scif_sas_domain_discovering_complete_io_handler,
scif_sas_domain_discovering_complete_high_priority_io_handler, //
scif_sas_domain_discovering_continue_io_handler,
scif_sas_domain_discovering_start_task_handler,
scif_sas_domain_discovering_complete_task_handler
}
};