| Current Path : /usr/src/sys/dev/isci/scil/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //usr/src/sys/dev/isci/scil/scu_task_context.h |
/*-
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD: release/9.1.0/sys/dev/isci/scil/scu_task_context.h 231689 2012-02-14 15:58:49Z jimharris $
*/
#ifndef _SCU_TASK_CONTEXT_H_
#define _SCU_TASK_CONTEXT_H_
/**
* @file
*
* @brief This file contains the structures and constants for the SCU hardware
* task context.
*/
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
#include <dev/isci/scil/sci_types.h>
/**
* @enum SCU_SSP_TASK_TYPE
*
* @brief This enumberation defines the various SSP task types the SCU
* hardware will accept.
*
* The definition for the various task types the SCU hardware will accept can
* be found in the DS specification.
*/
typedef enum
{
SCU_TASK_TYPE_IOREAD, ///< IO READ direction or no direction
SCU_TASK_TYPE_IOWRITE, ///< IO Write direction
SCU_TASK_TYPE_SMP_REQUEST, ///< SMP Request type
SCU_TASK_TYPE_RESPONSE, ///< Driver generated response frame (targt mode)
SCU_TASK_TYPE_RAW_FRAME, ///< Raw frame request type
SCU_TASK_TYPE_PRIMITIVE ///< Request for a primitive to be transmitted
} SCU_SSP_TASK_TYPE;
/**
* @enum SCU_SATA_TASK_TYPE
*
* @brief This enumeration defines the various SATA task types the SCU
* hardware will accept.
*
* The definition for the various task types the SCU hardware will accept can
* be found in the DS specification.
*/
typedef enum
{
SCU_TASK_TYPE_DMA_IN, ///< Read request
SCU_TASK_TYPE_FPDMAQ_READ, ///< NCQ read request
SCU_TASK_TYPE_PACKET_DMA_IN, ///< Packet read request
SCU_TASK_TYPE_SATA_RAW_FRAME, ///< Raw frame request
RESERVED_4,
RESERVED_5,
RESERVED_6,
RESERVED_7,
SCU_TASK_TYPE_DMA_OUT, ///< Write request
SCU_TASK_TYPE_FPDMAQ_WRITE, ///< NCQ write Request
SCU_TASK_TYPE_PACKET_DMA_OUT ///< Packet write request
} SCU_SATA_TASK_TYPE;
/**
* @name SCU_CONTEXT_TYPE
*/
/*@{*/
#define SCU_TASK_CONTEXT_TYPE 0
#define SCU_RNC_CONTEXT_TYPE 1
/*@}*/
/**
* @name SCU_TASK_CONTEXT_VALIDITY
*/
/*@{*/
#define SCU_TASK_CONTEXT_INVALID 0
#define SCU_TASK_CONTEXT_VALID 1
/*@}*/
/**
* @name SCU_COMMAND_CODE
*/
/*@{*/
#define SCU_COMMAND_CODE_INITIATOR_NEW_TASK 0
#define SCU_COMMAND_CODE_ACTIVE_TASK 1
#define SCU_COMMAND_CODE_PRIMITIVE_SEQ_TASK 2
#define SCU_COMMAND_CODE_TARGET_RAW_FRAMES 3
/*@}*/
/**
* @name SCU_TASK_PRIORITY
*/
/*@{*/
/**
* This priority is used when there is no priority request for this request.
*/
#define SCU_TASK_PRIORITY_NORMAL 0
/**
* This priority indicates that the task should be scheduled to the head
* of the queue. The task will NOT be executed if the TX is suspended for
* the remote node.
*/
#define SCU_TASK_PRIORITY_HEAD_OF_Q 1
/**
* This priority indicates that the task will be executed before all
* SCU_TASK_PRIORITY_NORMAL and SCU_TASK_PRIORITY_HEAD_OF_Q tasks.
* The task WILL be executed if the TX is suspended for the remote node.
*/
#define SCU_TASK_PRIORITY_HIGH 2
/**
* This task priority is reserved and should not be used.
*/
#define SCU_TASK_PRIORITY_RESERVED 3
/*@}*/
#define SCU_TASK_INITIATOR_MODE 1
#define SCU_TASK_TARGET_MODE 0
#define SCU_TASK_REGULAR 0
#define SCU_TASK_ABORTED 1
//direction bit defintion
/**
* @name SATA_DIRECTION
*/
/*@{*/
#define SCU_SATA_WRITE_DATA_DIRECTION 0
#define SCU_SATA_READ_DATA_DIRECTION 1
/*@}*/
/**
* @name SCU_COMMAND_CONTEXT_MACROS
*
* These macros provide the mask and shift operations to construct the various
* SCU commands
*/
/*@{*/
#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_SHIFT 21UL
#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK 0x00E00000UL
#define scu_get_command_request_type(x) \
((x) & SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK)
#define SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_SHIFT 18UL
#define SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK 0x001C0000UL
#define scu_get_command_request_subtype(x) \
((x) & SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK)
#define SCU_CONTEXT_COMMAND_REQUEST_FULLTYPE_MASK \
( \
SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK \
| SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK \
)
#define scu_get_command_request_full_type(x) \
((x) & SCU_CONTEXT_COMMAND_REQUEST_FULLTYPE_MASK)
#define SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT 16UL
#define SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_MASK 0x00010000UL
#define scu_get_command_protocl_engine_group(x) \
((x) & SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_MASK)
#define SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT 12UL
#define SCU_CONTEXT_COMMAND_LOGICAL_PORT_MASK 0x00007000UL
#define scu_get_command_reqeust_logical_port(x) \
((x) & SCU_CONTEXT_COMMAND_LOGICAL_PORT_MASK)
#define MAKE_SCU_CONTEXT_COMMAND_TYPE(type) \
((U32)(type) << SCU_CONTEXT_COMMAND_REQUEST_TYPE_SHIFT)
/*@}*/
/**
* @name SCU_COMMAND_TYPES
*
* These constants provide the grouping of the different SCU command types.
*/
/*@{*/
#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC MAKE_SCU_CONTEXT_COMMAND_TYPE(0UL)
#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC MAKE_SCU_CONTEXT_COMMAND_TYPE(1UL)
#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(2UL)
#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(3UL)
#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(6UL)
/*@}*/
#define MAKE_SCU_CONTEXT_COMMAND_REQUEST(type, command) \
((type) | (((U32)(command)) << SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_SHIFT))
/**
* @name SCU_REQUEST_TYPES
*
* These constants are the various request types that can be posted to the SCU
* hardware.
*/
/*@{*/
#define SCU_CONTEXT_COMMAND_REQUST_POST_TC \
(MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC, 0))
#define SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT \
(MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC, 1))
#define SCU_CONTEXT_COMMAND_REQUST_DUMP_TC \
(MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC, 0))
#define SCU_CONTEXT_COMMAND_POST_RNC_32 \
(MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 0))
#define SCU_CONTEXT_COMMAND_POST_RNC_96 \
(MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 1))
#define SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE \
(MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 2))
#define SCU_CONTEXT_COMMAND_DUMP_RNC_32 \
(MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC, 0))
#define SCU_CONTEXT_COMMAND_DUMP_RNC_96 \
(MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC, 1))
#define SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX \
(MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 0))
#define SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX \
(MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 1))
#define SCU_CONTEXT_COMMAND_POST_RNC_RESUME \
(MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 2))
#define SCU_CONTEXT_IT_NEXUS_LOSS_TIMER_ENABLE \
(MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 3))
#define SCU_CONTEXT_IT_NEXUS_LOSS_TIMER_DISABLE \
(MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 4))
/*@}*/
/**
* @name SCU_TASK_CONTEXT_PROTOCOL
* SCU Task context protocol types this is uesd to program the SCU Task
* context protocol field in word 0x00.
*/
/*@{*/
#define SCU_TASK_CONTEXT_PROTOCOL_SMP 0x00
#define SCU_TASK_CONTEXT_PROTOCOL_SSP 0x01
#define SCU_TASK_CONTEXT_PROTOCOL_STP 0x02
#define SCU_TASK_CONTEXT_PROTOCOL_NONE 0x07
/*@}*/
/**
* @struct SSP_TASK_CONTEXT
*
* @brief This is the SCU hardware definition for an SSP request.
*/
struct SSP_TASK_CONTEXT
{
// OFFSET 0x18
U32 reserved00 : 24;
U32 frame_type : 8;
// OFFSET 0x1C
U32 reserved01;
// OFFSET 0x20
U32 fill_bytes : 2;
U32 reserved02 : 6;
U32 changing_data_pointer : 1;
U32 retransmit : 1;
U32 retry_data_frame : 1;
U32 tlr_control : 2;
U32 reserved03 : 19;
// OFFSET 0x24
U32 uiRsvd4;
// OFFSET 0x28
U32 target_port_transfer_tag : 16;
U32 tag : 16;
// OFFSET 0x2C
U32 data_offset;
};
/**
* @struct STP_TASK_CONTEXT
*
* @brief This is the SCU hardware definition for an STP request.
*/
struct STP_TASK_CONTEXT
{
// OFFSET 0x18
U32 fis_type : 8;
U32 pm_port : 4;
U32 reserved0 : 3;
U32 control : 1;
U32 command : 8;
U32 features : 8;
// OFFSET 0x1C
U32 reserved1;
// OFFSET 0x20
U32 reserved2;
// OFFSET 0x24
U32 reserved3;
// OFFSET 0x28
U32 ncq_tag : 5;
U32 reserved4 : 27;
// OFFSET 0x2C
U32 data_offset; // TODO: What is this used for?
};
/**
* @struct SMP_TASK_CONTEXT
*
* @brief This is the SCU hardware definition for an SMP request.
*/
struct SMP_TASK_CONTEXT
{
// OFFSET 0x18
U32 response_length : 8;
U32 function_result : 8;
U32 function : 8;
U32 frame_type : 8;
// OFFSET 0x1C
U32 smp_response_ufi : 12;
U32 reserved1 : 20;
// OFFSET 0x20
U32 reserved2;
// OFFSET 0x24
U32 reserved3;
// OFFSET 0x28
U32 reserved4;
// OFFSET 0x2C
U32 reserved5;
};
/**
* @struct PRIMITIVE_TASK_CONTEXT
*
* @brief This is the SCU hardware definition used when the driver wants to
* send a primitive on the link.
*/
struct PRIMITIVE_TASK_CONTEXT
{
// OFFSET 0x18
/**
* This field is the control word and it must be 0.
*/
U32 control; ///< must be set to 0
// OFFSET 0x1C
/**
* This field specifies the primitive that is to be transmitted.
*/
U32 sequence;
// OFFSET 0x20
U32 reserved0;
// OFFSET 0x24
U32 reserved1;
// OFFSET 0x28
U32 reserved2;
// OFFSET 0x2C
U32 reserved3;
};
/**
* @union PROTOCOL_CONTEXT
*
* @brief The union of the protocols that can be selected in the SCU task
* context field.
*/
union PROTOCOL_CONTEXT
{
struct SSP_TASK_CONTEXT ssp;
struct STP_TASK_CONTEXT stp;
struct SMP_TASK_CONTEXT smp;
struct PRIMITIVE_TASK_CONTEXT primitive;
U32 words[6];
};
/**
* @struct SCU_SGL_ELEMENT
* @typedef SCU_SGL_ELEMENT_T
*
* @brief This structure represents a single SCU defined SGL element.
*
* SCU SGLs contain a 64 bit address with the maximum data transfer being 24
* bits in size. The SGL can not cross a 4GB boundary.
*/
typedef struct SCU_SGL_ELEMENT
{
/**
* This field is the upper 32 bits of the 64 bit physical address.
*/
U32 address_upper;
/**
* This field is the lower 32 bits of the 64 bit physical address.
*/
U32 address_lower;
/**
* This field is the number of bytes to transfer.
*/
U32 length: 24;
/**
* This field is the address modifier to be used when a virtual function is
* requesting a data transfer.
*/
U32 address_modifier: 8;
} SCU_SGL_ELEMENT_T;
#define SCU_SGL_ELEMENT_PAIR_A 0
#define SCU_SGL_ELEMENT_PAIR_B 1
/**
* @struct SCU_SGL_ELEMENT_PAIR
*
* @brief This structure is the SCU hardware definition of a pair of SGL
* elements.
*
* The SCU hardware always works on SGL pairs. They are refered to in the DS
* specification as SGL A and SGL B. Each SGL pair is followed by the address
* of the next pair.
*/
typedef struct SCU_SGL_ELEMENT_PAIR
{
// OFFSET 0x60-0x68
/**
* This field is the SGL element A of the SGL pair.
*/
SCU_SGL_ELEMENT_T A;
// OFFSET 0x6C-0x74
/**
* This field is the SGL element B of the SGL pair.
*/
SCU_SGL_ELEMENT_T B;
// OFFSET 0x78-0x7C
/**
* This field is the upper 32 bits of the 64 bit address to the next SGL
* element pair.
*/
U32 next_pair_upper;
/**
* This field is the lower 32 bits of the 64 bit address to the next SGL
* element pair.
*/
U32 next_pair_lower;
} SCU_SGL_ELEMENT_PAIR_T;
/**
* @struct TRANSPORT_SNAPSHOT
*
* @brief This structure is the SCU hardware scratch area for the task
* context.
*
* This is set to 0 by the driver but can be read by issuing a dump TC request
* to the SCU.
*/
struct TRANSPORT_SNAPSHOT
{
// OFFSET 0x48
U32 xfer_rdy_write_data_length;
// OFFSET 0x4C
U32 data_offset;
// OFFSET 0x50
U32 data_transfer_size : 24;
U32 reserved_50_0 : 8;
// OFFSET 0x54
U32 next_initiator_write_data_offset;
// OFFSET 0x58
U32 next_initiator_write_data_xfer_size : 24;
U32 reserved_58_0 : 8;
};
/**
* @struct SCU_TASK_CONTEXT
*
* @brief This structure defines the contents of the SCU silicon task context.
* It lays out all of the fields according to the expected order and
* location for the Storage Controller unit.
*/
typedef struct SCU_TASK_CONTEXT
{
// OFFSET 0x00 ------
/**
* This field must be encoded to one of the valid SCU task priority values
* - SCU_TASK_PRIORITY_NORMAL
* - SCU_TASK_PRIORITY_HEAD_OF_Q
* - SCU_TASK_PRIORITY_HIGH
*/
U32 priority : 2;
/**
* This field must be set to TRUE if this is an initiator generated request.
* Until target mode is supported all task requests are initiator requests.
*/
U32 initiator_request : 1;
/**
* This field must be set to one of the valid connection rates valid values
* are 0x8, 0x9, and 0xA.
*/
U32 connection_rate : 4;
/**
* This field muse be programed when generating an SMP response since the SMP
* connection remains open until the SMP response is generated.
*/
U32 protocol_engine_index : 3;
/**
* This field must contain the logical port for the task request.
*/
U32 logical_port_index : 3;
/**
* This field must be set to one of the SCU_TASK_CONTEXT_PROTOCOL values
* - SCU_TASK_CONTEXT_PROTOCOL_SMP
* - SCU_TASK_CONTEXT_PROTOCOL_SSP
* - SCU_TASK_CONTEXT_PROTOCOL_STP
* - SCU_TASK_CONTEXT_PROTOCOL_NONE
*/
U32 protocol_type : 3;
/**
* This filed must be set to the TCi allocated for this task
*/
U32 task_index : 12;
/**
* This field is reserved and must be set to 0x00
*/
U32 reserved_00_0 : 1;
/**
* For a normal task request this must be set to 0. If this is an abort of
* this task request it must be set to 1.
*/
U32 abort : 1;
/**
* This field must be set to TRUE for the SCU hardware to process the task.
*/
U32 valid : 1;
/**
* This field must be set to SCU_TASK_CONTEXT_TYPE
*/
U32 context_type : 1;
// OFFSET 0x04
/**
* This field contains the RNi that is the target of this request.
*/
U32 remote_node_index : 12;
/**
* This field is programmed if this is a mirrored request, which we are not
* using, in which case it is the RNi for the mirrored target.
*/
U32 mirrored_node_index : 12;
/**
* This field is programmed with the direction of the SATA reqeust
* - SCU_SATA_WRITE_DATA_DIRECTION
* - SCU_SATA_READ_DATA_DIRECTION
*/
U32 sata_direction : 1;
/**
* This field is programmsed with one of the following SCU_COMMAND_CODE
* - SCU_COMMAND_CODE_INITIATOR_NEW_TASK
* - SCU_COMMAND_CODE_ACTIVE_TASK
* - SCU_COMMAND_CODE_PRIMITIVE_SEQ_TASK
* - SCU_COMMAND_CODE_TARGET_RAW_FRAMES
*/
U32 command_code : 2;
/**
* This field is set to TRUE if the remote node should be suspended.
* This bit is only valid for SSP & SMP target devices.
*/
U32 suspend_node : 1;
/**
* This field is programmed with one of the following command type codes
*
* For SAS requests use the SCU_SSP_TASK_TYPE
* - SCU_TASK_TYPE_IOREAD
* - SCU_TASK_TYPE_IOWRITE
* - SCU_TASK_TYPE_SMP_REQUEST
* - SCU_TASK_TYPE_RESPONSE
* - SCU_TASK_TYPE_RAW_FRAME
* - SCU_TASK_TYPE_PRIMITIVE
*
* For SATA requests use the SCU_SATA_TASK_TYPE
* - SCU_TASK_TYPE_DMA_IN
* - SCU_TASK_TYPE_FPDMAQ_READ
* - SCU_TASK_TYPE_PACKET_DMA_IN
* - SCU_TASK_TYPE_SATA_RAW_FRAME
* - SCU_TASK_TYPE_DMA_OUT
* - SCU_TASK_TYPE_FPDMAQ_WRITE
* - SCU_TASK_TYPE_PACKET_DMA_OUT
*/
U32 task_type : 4;
// OFFSET 0x08
/**
* This field is reserved and the must be set to 0x00
*/
U32 link_layer_control : 8; // presently all reserved
/**
* This field is set to TRUE when TLR is to be enabled
*/
U32 ssp_tlr_enable : 1;
/**
* This is field specifies if the SCU DMAs a response frame to host
* memory for good response frames when operating in target mode.
*/
U32 dma_ssp_target_good_response : 1;
/**
* This field indicates if the SCU should DMA the response frame to
* host memory.
*/
U32 do_not_dma_ssp_good_response : 1;
/**
* This field is set to TRUE when strict ordering is to be enabled
*/
U32 strict_ordering : 1;
/**
* This field indicates the type of endianess to be utilized for the
* frame. command, task, and response frames utilized control_frame
* set to 1.
*/
U32 control_frame : 1;
/**
* This field is reserved and the driver should set to 0x00
*/
U32 tl_control_reserved : 3;
/**
* This field is set to TRUE when the SCU hardware task timeout control is to
* be enabled
*/
U32 timeout_enable : 1;
/**
* This field is reserved and the driver should set it to 0x00
*/
U32 pts_control_reserved : 7;
/**
* This field should be set to TRUE when block guard is to be enabled
*/
U32 block_guard_enable : 1;
/**
* This field is reserved and the driver should set to 0x00
*/
U32 sdma_control_reserved : 7;
// OFFSET 0x0C
/**
* This field is the address modifier for this io request it should be
* programmed with the virtual function that is making the request.
*/
U32 address_modifier : 16;
/**
* @todo What we support mirrored SMP response frame?
*/
U32 mirrored_protocol_engine : 3; // mirrored protocol Engine Index
/**
* If this is a mirrored request the logical port index for the mirrored RNi
* must be programmed.
*/
U32 mirrored_logical_port : 4; // mirrored local port index
/**
* This field is reserved and the driver must set it to 0x00
*/
U32 reserved_0C_0 : 8;
/**
* This field must be set to TRUE if the mirrored request processing is to be
* enabled.
*/
U32 mirror_request_enable : 1; // Mirrored request Enable
// OFFSET 0x10
/**
* This field is the command iu length in dwords
*/
U32 ssp_command_iu_length : 8;
/**
* This is the target TLR enable bit it must be set to 0 when creatning the
* task context.
*/
U32 xfer_ready_tlr_enable : 1;
/**
* This field is reserved and the driver must set it to 0x00
*/
U32 reserved_10_0 : 7;
/**
* This is the maximum burst size that the SCU hardware will send in one
* connection its value is (N x 512) and N must be a multiple of 2. If the
* value is 0x00 then maximum burst size is disabled.
*/
U32 ssp_max_burst_size : 16;
// OFFSET 0x14
/**
* This filed is set to the number of bytes to be transfered in the request.
*/
U32 transfer_length_bytes : 24; // In terms of bytes
/**
* This field is reserved and the driver should set it to 0x00
*/
U32 reserved_14_0 : 8;
// OFFSET 0x18-0x2C
/**
* This union provides for the protocol specif part of the SCU Task Context.
*/
union PROTOCOL_CONTEXT type;
// OFFSET 0x30-0x34
/**
* This field is the upper 32 bits of the 64 bit physical address of the
* command iu buffer
*/
U32 command_iu_upper;
/**
* This field is the lower 32 bits of the 64 bit physical address of the
* command iu buffer
*/
U32 command_iu_lower;
// OFFSET 0x38-0x3C
/**
* This field is the upper 32 bits of the 64 bit physical address of the
* response iu buffer
*/
U32 response_iu_upper;
/**
* This field is the lower 32 bits of the 64 bit physical address of the
* response iu buffer
*/
U32 response_iu_lower;
// OFFSET 0x40
/**
* This field is set to the task phase of the SCU hardware. The driver must
* set this to 0x01
*/
U32 task_phase : 8;
/**
* This field is set to the transport layer task status. The driver must set
* this to 0x00
*/
U32 task_status : 8;
/**
* This field is used during initiator write TLR
*/
U32 previous_extended_tag : 4;
/**
* This field is set the maximum number of retries for a STP non-data FIS
*/
U32 stp_retry_count : 2;
/**
* This field is reserved and the driver must set it to 0x00
*/
U32 reserved_40_1 : 2;
/**
* This field is used by the SCU TL to determine when to take a snapshot when
* tranmitting read data frames.
* - 0x00 The entire IO
* - 0x01 32k
* - 0x02 64k
* - 0x04 128k
* - 0x08 256k
*/
U32 ssp_tlr_threshold : 4;
/**
* This field is reserved and the driver must set it to 0x00
*/
U32 reserved_40_2 : 4;
// OFFSET 0x44
U32 write_data_length; // read only set to 0
// OFFSET 0x48-0x58
struct TRANSPORT_SNAPSHOT snapshot; // read only set to 0
// OFFSET 0x5C
U32 block_protection_enable : 1;
U32 block_size : 2;
U32 block_protection_function : 2;
U32 reserved_5C_0 : 9;
U32 active_sgl_element : 2; // read only set to 0
U32 sgl_exhausted : 1; // read only set to 0
U32 payload_data_transfer_error : 4; // read only set to 0
U32 frame_buffer_offset : 11; // read only set to 0
// OFFSET 0x60-0x7C
/**
* This field is the first SGL element pair found in the TC data structure.
*/
SCU_SGL_ELEMENT_PAIR_T sgl_pair_ab;
// OFFSET 0x80-0x9C
/**
* This field is the second SGL element pair found in the TC data structure.
*/
SCU_SGL_ELEMENT_PAIR_T sgl_pair_cd;
// OFFSET 0xA0-BC
SCU_SGL_ELEMENT_PAIR_T sgl_snapshot_ac;
// OFFSET 0xC0
U32 active_sgl_element_pair; // read only set to 0
// OFFSET 0xC4-0xCC
U32 reserved_C4_CC[3];
// OFFSET 0xD0
U32 intermediate_crc_value : 16;
U32 initial_crc_seed : 16;
// OFFSET 0xD4
U32 application_tag_for_verify : 16;
U32 application_tag_for_generate : 16;
// OFFSET 0xD8
U32 reference_tag_seed_for_verify_function;
// OFFSET 0xDC
U32 reserved_DC;
// OFFSET 0xE0
U32 reserved_E0_0 : 16;
U32 application_tag_mask_for_generate: 16;
// OFFSET 0xE4
U32 block_protection_control : 16;
U32 application_tag_mask_for_verify : 16;
// OFFSET 0xE8
U32 block_protection_error : 8;
U32 reserved_E8_0 :24;
// OFFSET 0xEC
U32 reference_tag_seed_for_verify;
// OFFSET 0xF0
U32 intermediate_crc_valid_snapshot : 16;
U32 reserved_F0_0 : 16;
// OFFSET 0xF4
U32 reference_tag_seed_for_verify_function_snapshot;
// OFFSET 0xF8
U32 snapshot_of_reserved_dword_DC_of_tc;
// OFFSET 0xFC
U32 reference_tag_seed_for_generate_function_snapshot;
} SCU_TASK_CONTEXT_T;
#ifdef __cplusplus
}
#endif // __cplusplus
#endif // _SCU_TASK_CONTEXT_H_