| Current Path : /usr/src/sys/dev/sym/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //usr/src/sys/dev/sym/sym_fw.h |
/*-
* Device driver optimized for the Symbios/LSI 53C896/53C895A/53C1010
* PCI-SCSI controllers.
*
* Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr>
*
* This driver also supports the following Symbios/LSI PCI-SCSI chips:
* 53C810A, 53C825A, 53C860, 53C875, 53C876, 53C885, 53C895,
* 53C810, 53C815, 53C825 and the 53C1510D is 53C8XX mode.
*
*
* This driver for FreeBSD-CAM is derived from the Linux sym53c8xx driver.
* Copyright (C) 1998-1999 Gerard Roudier
*
* The sym53c8xx driver is derived from the ncr53c8xx driver that had been
* a port of the FreeBSD ncr driver to Linux-1.2.13.
*
* The original ncr driver has been written for 386bsd and FreeBSD by
* Wolfgang Stanglmeier <wolf@cologne.de>
* Stefan Esser <se@mi.Uni-Koeln.de>
* Copyright (C) 1994 Wolfgang Stanglmeier
*
* The initialisation code, and part of the code that addresses
* FreeBSD-CAM services is based on the aic7xxx driver for FreeBSD-CAM
* written by Justin T. Gibbs.
*
* Other major contributions:
*
* NVRAM detection and reading.
* Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
*
*-----------------------------------------------------------------------------
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/* $FreeBSD: release/9.1.0/sys/dev/sym/sym_fw.h 179029 2008-05-15 20:27:18Z marius $ */
#ifndef SYM_FW_H
#define SYM_FW_H
/*
* Macro used to generate interfaces for script A.
*/
#define SYM_GEN_FW_A(s) \
SYM_GEN_A(s, start) SYM_GEN_A(s, getjob_begin) \
SYM_GEN_A(s, getjob_end) \
SYM_GEN_A(s, select) SYM_GEN_A(s, wf_sel_done) \
SYM_GEN_A(s, send_ident) \
SYM_GEN_A(s, dispatch) SYM_GEN_A(s, init) \
SYM_GEN_A(s, clrack) SYM_GEN_A(s, complete_error) \
SYM_GEN_A(s, done) SYM_GEN_A(s, done_end) \
SYM_GEN_A(s, idle) SYM_GEN_A(s, ungetjob) \
SYM_GEN_A(s, reselect) \
SYM_GEN_A(s, resel_tag) SYM_GEN_A(s, resel_dsa) \
SYM_GEN_A(s, resel_no_tag) \
SYM_GEN_A(s, data_in) SYM_GEN_A(s, data_in2) \
SYM_GEN_A(s, data_out) SYM_GEN_A(s, data_out2) \
SYM_GEN_A(s, pm0_data) SYM_GEN_A(s, pm1_data)
/*
* Macro used to generate interfaces for script B.
*/
#define SYM_GEN_FW_B(s) \
SYM_GEN_B(s, no_data) \
SYM_GEN_B(s, sel_for_abort) SYM_GEN_B(s, sel_for_abort_1) \
SYM_GEN_B(s, msg_bad) SYM_GEN_B(s, msg_weird) \
SYM_GEN_B(s, wdtr_resp) SYM_GEN_B(s, send_wdtr) \
SYM_GEN_B(s, sdtr_resp) SYM_GEN_B(s, send_sdtr) \
SYM_GEN_B(s, ppr_resp) SYM_GEN_B(s, send_ppr) \
SYM_GEN_B(s, nego_bad_phase) \
SYM_GEN_B(s, ident_break) SYM_GEN_B(s, ident_break_atn) \
SYM_GEN_B(s, sdata_in) SYM_GEN_B(s, resel_bad_lun) \
SYM_GEN_B(s, bad_i_t_l) SYM_GEN_B(s, bad_i_t_l_q) \
SYM_GEN_B(s, wsr_ma_helper) \
SYM_GEN_B(s, snooptest) SYM_GEN_B(s, snoopend)
/*
* Generates structure interface that contains
* offsets within script A and script B.
*/
#define SYM_GEN_A(s, label) s label;
#define SYM_GEN_B(s, label) s label;
struct sym_fwa_ofs {
SYM_GEN_FW_A(u_short)
};
struct sym_fwb_ofs {
SYM_GEN_FW_B(u_short)
SYM_GEN_B(u_short, start64)
SYM_GEN_B(u_short, pm_handle)
};
/*
* Generates structure interface that contains
* bus addresses within script A and script B.
*/
struct sym_fwa_ba {
SYM_GEN_FW_A(u32)
};
struct sym_fwb_ba {
SYM_GEN_FW_B(u32)
SYM_GEN_B(u32, start64)
SYM_GEN_B(u32, pm_handle)
};
#undef SYM_GEN_A
#undef SYM_GEN_B
/*
* Let cc know about the name of the controller data structure.
* We need this for function prototype declarations just below.
*/
struct sym_hcb;
/*
* Generic structure that defines a firmware.
*/
struct sym_fw {
const char *name; /* Name we want to print out */
const u32 *a_base;/* Pointer to script A template */
int a_size; /* Size of script A */
const struct sym_fwa_ofs
*a_ofs; /* Useful offsets in script A */
const u32 *b_base;/* Pointer to script B template */
int b_size; /* Size of script B */
const struct sym_fwb_ofs
*b_ofs; /* Useful offsets in script B */
/* Setup and patch methods for this firmware */
void (*setup)(struct sym_hcb *, const struct sym_fw *);
void (*patch)(struct sym_hcb *);
};
/*
* Macro used to declare a firmware.
*/
#define SYM_FW_ENTRY(fw, name) \
{ \
name, \
(const u32 *) &fw##a_scr, sizeof(fw##a_scr), &fw##a_ofs,\
(const u32 *) &fw##b_scr, sizeof(fw##b_scr), &fw##b_ofs,\
fw##_setup, fw##_patch \
}
/*
* Macros used from the C code to get useful
* SCRIPTS bus addresses.
*/
#define SCRIPTA_BA(np, label) (np->fwa_bas.label)
#define SCRIPTB_BA(np, label) (np->fwb_bas.label)
#define SCRIPTB0_BA(np,label) \
(np->scriptb0_ba + (np->fwb_bas.label - np->scriptb_ba))
/*
* Macros used by scripts definitions.
*
* HADDR_1 generates a reference to a field of the controller data.
* HADDR_2 generates a reference to a field of the controller data
* with offset.
* RADDR_1 generates a reference to a script processor register.
* RADDR_2 generates a reference to a script processor register
* with offset.
* PADDR_A generates a reference to another part of script A.
* PADDR_B generates a reference to another part of script B.
*
* SYM_GEN_PADDR_A and SYM_GEN_PADDR_B are used to define respectively
* the PADDR_A and PADDR_B macros for each firmware by setting argument
* `s' to the name of the corresponding structure.
*
* SCR_DATA_ZERO is used to allocate a DWORD of data in scripts areas.
*/
#define RELOC_SOFTC 0x40000000
#define RELOC_LABEL_A 0x50000000
#define RELOC_REGISTER 0x60000000
#define RELOC_LABEL_B 0x80000000
#define RELOC_MASK 0xf0000000
#define HADDR_1(label) (RELOC_SOFTC | offsetof(struct sym_hcb, label))
#define HADDR_2(label,ofs) (RELOC_SOFTC | \
(offsetof(struct sym_hcb, label)+(ofs)))
#define RADDR_1(label) (RELOC_REGISTER | REG(label))
#define RADDR_2(label,ofs) (RELOC_REGISTER | ((REG(label))+(ofs)))
#define SYM_GEN_PADDR_A(s, label) (RELOC_LABEL_A | offsetof(s, label))
#define SYM_GEN_PADDR_B(s, label) (RELOC_LABEL_B | offsetof(s, label))
#define SCR_DATA_ZERO 0xf00ff00f
#endif /* SYM_FW_H */