Current Path : /usr/src/sys/x86/pci/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //usr/src/sys/x86/pci/pci_bus.c |
/*- * Copyright (c) 1997, Stefan Esser <se@freebsd.org> * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include <sys/cdefs.h> __FBSDID("$FreeBSD: release/9.1.0/sys/x86/pci/pci_bus.c 234150 2012-04-11 20:50:17Z jhb $"); #include "opt_cpu.h" #include <sys/param.h> #include <sys/systm.h> #include <sys/bus.h> #include <sys/kernel.h> #include <sys/malloc.h> #include <sys/module.h> #include <sys/rman.h> #include <sys/sysctl.h> #include <dev/pci/pcivar.h> #include <dev/pci/pcireg.h> #include <dev/pci/pcib_private.h> #include <isa/isavar.h> #ifdef CPU_ELAN #include <machine/md_var.h> #endif #include <machine/legacyvar.h> #include <machine/pci_cfgreg.h> #include <machine/resource.h> #include "pcib_if.h" int legacy_pcib_maxslots(device_t dev) { return 31; } /* read configuration space register */ uint32_t legacy_pcib_read_config(device_t dev, u_int bus, u_int slot, u_int func, u_int reg, int bytes) { return(pci_cfgregread(bus, slot, func, reg, bytes)); } /* write configuration space register */ void legacy_pcib_write_config(device_t dev, u_int bus, u_int slot, u_int func, u_int reg, uint32_t data, int bytes) { pci_cfgregwrite(bus, slot, func, reg, data, bytes); } /* route interrupt */ static int legacy_pcib_route_interrupt(device_t pcib, device_t dev, int pin) { #ifdef __HAVE_PIR return (pci_pir_route_interrupt(pci_get_bus(dev), pci_get_slot(dev), pci_get_function(dev), pin)); #else /* No routing possible */ return (PCI_INVALID_IRQ); #endif } /* Pass MSI requests up to the nexus. */ static int legacy_pcib_alloc_msi(device_t pcib, device_t dev, int count, int maxcount, int *irqs) { device_t bus; bus = device_get_parent(pcib); return (PCIB_ALLOC_MSI(device_get_parent(bus), dev, count, maxcount, irqs)); } static int legacy_pcib_alloc_msix(device_t pcib, device_t dev, int *irq) { device_t bus; bus = device_get_parent(pcib); return (PCIB_ALLOC_MSIX(device_get_parent(bus), dev, irq)); } int legacy_pcib_map_msi(device_t pcib, device_t dev, int irq, uint64_t *addr, uint32_t *data) { device_t bus, hostb; int error, func, slot; bus = device_get_parent(pcib); error = PCIB_MAP_MSI(device_get_parent(bus), dev, irq, addr, data); if (error) return (error); slot = legacy_get_pcislot(pcib); func = legacy_get_pcifunc(pcib); if (slot == -1 || func == -1) return (0); hostb = pci_find_bsf(0, slot, func); KASSERT(hostb != NULL, ("%s: missing hostb for 0:%d:%d", __func__, slot, func)); pci_ht_map_msi(hostb, *addr); return (0); } static const char * legacy_pcib_is_host_bridge(int bus, int slot, int func, uint32_t id, uint8_t class, uint8_t subclass, uint8_t *busnum) { #ifdef __i386__ const char *s = NULL; static uint8_t pxb[4]; /* hack for 450nx */ *busnum = 0; switch (id) { case 0x12258086: s = "Intel 824?? host to PCI bridge"; /* XXX This is a guess */ /* *busnum = legacy_pcib_read_config(0, bus, slot, func, 0x41, 1); */ *busnum = bus; break; case 0x71208086: s = "Intel 82810 (i810 GMCH) Host To Hub bridge"; break; case 0x71228086: s = "Intel 82810-DC100 (i810-DC100 GMCH) Host To Hub bridge"; break; case 0x71248086: s = "Intel 82810E (i810E GMCH) Host To Hub bridge"; break; case 0x11308086: s = "Intel 82815 (i815 GMCH) Host To Hub bridge"; break; case 0x71808086: s = "Intel 82443LX (440 LX) host to PCI bridge"; break; case 0x71908086: s = "Intel 82443BX (440 BX) host to PCI bridge"; break; case 0x71928086: s = "Intel 82443BX host to PCI bridge (AGP disabled)"; break; case 0x71948086: s = "Intel 82443MX host to PCI bridge"; break; case 0x71a08086: s = "Intel 82443GX host to PCI bridge"; break; case 0x71a18086: s = "Intel 82443GX host to AGP bridge"; break; case 0x71a28086: s = "Intel 82443GX host to PCI bridge (AGP disabled)"; break; case 0x84c48086: s = "Intel 82454KX/GX (Orion) host to PCI bridge"; *busnum = legacy_pcib_read_config(0, bus, slot, func, 0x4a, 1); break; case 0x84ca8086: /* * For the 450nx chipset, there is a whole bundle of * things pretending to be host bridges. The MIOC will * be seen first and isn't really a pci bridge (the * actual busses are attached to the PXB's). We need to * read the registers of the MIOC to figure out the * bus numbers for the PXB channels. * * Since the MIOC doesn't have a pci bus attached, we * pretend it wasn't there. */ pxb[0] = legacy_pcib_read_config(0, bus, slot, func, 0xd0, 1); /* BUSNO[0] */ pxb[1] = legacy_pcib_read_config(0, bus, slot, func, 0xd1, 1) + 1; /* SUBA[0]+1 */ pxb[2] = legacy_pcib_read_config(0, bus, slot, func, 0xd3, 1); /* BUSNO[1] */ pxb[3] = legacy_pcib_read_config(0, bus, slot, func, 0xd4, 1) + 1; /* SUBA[1]+1 */ return NULL; case 0x84cb8086: switch (slot) { case 0x12: s = "Intel 82454NX PXB#0, Bus#A"; *busnum = pxb[0]; break; case 0x13: s = "Intel 82454NX PXB#0, Bus#B"; *busnum = pxb[1]; break; case 0x14: s = "Intel 82454NX PXB#1, Bus#A"; *busnum = pxb[2]; break; case 0x15: s = "Intel 82454NX PXB#1, Bus#B"; *busnum = pxb[3]; break; } break; case 0x1A308086: s = "Intel 82845 Host to PCI bridge"; break; /* AMD -- vendor 0x1022 */ case 0x30001022: s = "AMD Elan SC520 host to PCI bridge"; #ifdef CPU_ELAN init_AMD_Elan_sc520(); #else printf( "*** WARNING: missing CPU_ELAN -- timekeeping may be wrong\n"); #endif break; case 0x70061022: s = "AMD-751 host to PCI bridge"; break; case 0x700e1022: s = "AMD-761 host to PCI bridge"; break; /* SiS -- vendor 0x1039 */ case 0x04961039: s = "SiS 85c496"; break; case 0x04061039: s = "SiS 85c501"; break; case 0x06011039: s = "SiS 85c601"; break; case 0x55911039: s = "SiS 5591 host to PCI bridge"; break; case 0x00011039: s = "SiS 5591 host to AGP bridge"; break; /* VLSI -- vendor 0x1004 */ case 0x00051004: s = "VLSI 82C592 Host to PCI bridge"; break; /* XXX Here is MVP3, I got the datasheet but NO M/B to test it */ /* totally. Please let me know if anything wrong. -F */ /* XXX need info on the MVP3 -- any takers? */ case 0x05981106: s = "VIA 82C598MVP (Apollo MVP3) host bridge"; break; /* AcerLabs -- vendor 0x10b9 */ /* Funny : The datasheet told me vendor id is "10b8",sub-vendor */ /* id is '10b9" but the register always shows "10b9". -Foxfair */ case 0x154110b9: s = "AcerLabs M1541 (Aladdin-V) PCI host bridge"; break; /* OPTi -- vendor 0x1045 */ case 0xc7011045: s = "OPTi 82C700 host to PCI bridge"; break; case 0xc8221045: s = "OPTi 82C822 host to PCI Bridge"; break; /* ServerWorks -- vendor 0x1166 */ case 0x00051166: s = "ServerWorks NB6536 2.0HE host to PCI bridge"; *busnum = legacy_pcib_read_config(0, bus, slot, func, 0x44, 1); break; case 0x00061166: /* FALLTHROUGH */ case 0x00081166: /* FALLTHROUGH */ case 0x02011166: /* FALLTHROUGH */ case 0x010f1014: /* IBM re-badged ServerWorks chipset */ s = "ServerWorks host to PCI bridge"; *busnum = legacy_pcib_read_config(0, bus, slot, func, 0x44, 1); break; case 0x00091166: s = "ServerWorks NB6635 3.0LE host to PCI bridge"; *busnum = legacy_pcib_read_config(0, bus, slot, func, 0x44, 1); break; case 0x00101166: s = "ServerWorks CIOB30 host to PCI bridge"; *busnum = legacy_pcib_read_config(0, bus, slot, func, 0x44, 1); break; case 0x00111166: /* FALLTHROUGH */ case 0x03021014: /* IBM re-badged ServerWorks chipset */ s = "ServerWorks CMIC-HE host to PCI-X bridge"; *busnum = legacy_pcib_read_config(0, bus, slot, func, 0x44, 1); break; /* XXX unknown chipset, but working */ case 0x00171166: /* FALLTHROUGH */ case 0x01011166: case 0x01101166: case 0x02251166: s = "ServerWorks host to PCI bridge(unknown chipset)"; *busnum = legacy_pcib_read_config(0, bus, slot, func, 0x44, 1); break; /* Compaq/HP -- vendor 0x0e11 */ case 0x60100e11: s = "Compaq/HP Model 6010 HotPlug PCI Bridge"; *busnum = legacy_pcib_read_config(0, bus, slot, func, 0xc8, 1); break; /* Integrated Micro Solutions -- vendor 0x10e0 */ case 0x884910e0: s = "Integrated Micro Solutions VL Bridge"; break; default: if (class == PCIC_BRIDGE && subclass == PCIS_BRIDGE_HOST) s = "Host to PCI bridge"; break; } return s; #else const char *s = NULL; *busnum = 0; if (class == PCIC_BRIDGE && subclass == PCIS_BRIDGE_HOST) s = "Host to PCI bridge"; return s; #endif } /* * Scan the first pci bus for host-pci bridges and add pcib instances * to the nexus for each bridge. */ static void legacy_pcib_identify(driver_t *driver, device_t parent) { int bus, slot, func; uint8_t hdrtype; int found = 0; int pcifunchigh; int found824xx = 0; int found_orion = 0; device_t child; devclass_t pci_devclass; if (pci_cfgregopen() == 0) return; /* * Check to see if we haven't already had a PCI bus added * via some other means. If we have, bail since otherwise * we're going to end up duplicating it. */ if ((pci_devclass = devclass_find("pci")) && devclass_get_device(pci_devclass, 0)) return; bus = 0; retry: for (slot = 0; slot <= PCI_SLOTMAX; slot++) { func = 0; hdrtype = legacy_pcib_read_config(0, bus, slot, func, PCIR_HDRTYPE, 1); /* * When enumerating bus devices, the standard says that * one should check the header type and ignore the slots whose * header types that the software doesn't know about. We use * this to filter out devices. */ if ((hdrtype & PCIM_HDRTYPE) > PCI_MAXHDRTYPE) continue; if ((hdrtype & PCIM_MFDEV) && (!found_orion || hdrtype != 0xff)) pcifunchigh = PCI_FUNCMAX; else pcifunchigh = 0; for (func = 0; func <= pcifunchigh; func++) { /* * Read the IDs and class from the device. */ uint32_t id; uint8_t class, subclass, busnum; const char *s; device_t *devs; int ndevs, i; id = legacy_pcib_read_config(0, bus, slot, func, PCIR_DEVVENDOR, 4); if (id == -1) continue; class = legacy_pcib_read_config(0, bus, slot, func, PCIR_CLASS, 1); subclass = legacy_pcib_read_config(0, bus, slot, func, PCIR_SUBCLASS, 1); s = legacy_pcib_is_host_bridge(bus, slot, func, id, class, subclass, &busnum); if (s == NULL) continue; /* * Check to see if the physical bus has already * been seen. Eg: hybrid 32 and 64 bit host * bridges to the same logical bus. */ if (device_get_children(parent, &devs, &ndevs) == 0) { for (i = 0; s != NULL && i < ndevs; i++) { if (strcmp(device_get_name(devs[i]), "pcib") != 0) continue; if (legacy_get_pcibus(devs[i]) == busnum) s = NULL; } free(devs, M_TEMP); } if (s == NULL) continue; /* * Add at priority 100 to make sure we * go after any motherboard resources */ child = BUS_ADD_CHILD(parent, 100, "pcib", busnum); device_set_desc(child, s); legacy_set_pcibus(child, busnum); legacy_set_pcislot(child, slot); legacy_set_pcifunc(child, func); found = 1; if (id == 0x12258086) found824xx = 1; if (id == 0x84c48086) found_orion = 1; } } if (found824xx && bus == 0) { bus++; goto retry; } /* * Make sure we add at least one bridge since some old * hardware doesn't actually have a host-pci bridge device. * Note that pci_cfgregopen() thinks we have PCI devices.. */ if (!found) { if (bootverbose) printf( "legacy_pcib_identify: no bridge found, adding pcib0 anyway\n"); child = BUS_ADD_CHILD(parent, 100, "pcib", 0); legacy_set_pcibus(child, 0); } } static int legacy_pcib_probe(device_t dev) { if (pci_cfgregopen() == 0) return ENXIO; return -100; } static int legacy_pcib_attach(device_t dev) { #ifdef __HAVE_PIR device_t pir; #endif int bus; bus = pcib_get_bus(dev); #ifdef __HAVE_PIR /* * Look for a PCI BIOS interrupt routing table as that will be * our method of routing interrupts if we have one. */ if (pci_pir_probe(bus, 0)) { pir = BUS_ADD_CHILD(device_get_parent(dev), 0, "pir", 0); if (pir != NULL) device_probe_and_attach(pir); } #endif device_add_child(dev, "pci", bus); return bus_generic_attach(dev); } int legacy_pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result) { switch (which) { case PCIB_IVAR_DOMAIN: *result = 0; return 0; case PCIB_IVAR_BUS: *result = legacy_get_pcibus(dev); return 0; } return ENOENT; } int legacy_pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t value) { switch (which) { case PCIB_IVAR_DOMAIN: return EINVAL; case PCIB_IVAR_BUS: legacy_set_pcibus(dev, value); return 0; } return ENOENT; } /* * Helper routine for x86 Host-PCI bridge driver resource allocation. * This is used to adjust the start address of wildcard allocation * requests to avoid low addresses that are known to be problematic. * * If no memory preference is given, use upper 32MB slot most BIOSes * use for their memory window. This is typically only used on older * laptops that don't have PCI busses behind a PCI bridge, so assuming * > 32MB is likely OK. * * However, this can cause problems for other chipsets, so we make * this tunable by hw.pci.host_mem_start. */ SYSCTL_DECL(_hw_pci); static unsigned long host_mem_start = 0x80000000; TUNABLE_ULONG("hw.pci.host_mem_start", &host_mem_start); SYSCTL_ULONG(_hw_pci, OID_AUTO, host_mem_start, CTLFLAG_RDTUN, &host_mem_start, 0, "Limit the host bridge memory to being above this address."); u_long hostb_alloc_start(int type, u_long start, u_long end, u_long count) { if (start + count - 1 != end) { if (type == SYS_RES_MEMORY && start < host_mem_start) start = host_mem_start; if (type == SYS_RES_IOPORT && start < 0x1000) start = 0x1000; } return (start); } struct resource * legacy_pcib_alloc_resource(device_t dev, device_t child, int type, int *rid, u_long start, u_long end, u_long count, u_int flags) { start = hostb_alloc_start(type, start, end, count); return (bus_generic_alloc_resource(dev, child, type, rid, start, end, count, flags)); } static device_method_t legacy_pcib_methods[] = { /* Device interface */ DEVMETHOD(device_identify, legacy_pcib_identify), DEVMETHOD(device_probe, legacy_pcib_probe), DEVMETHOD(device_attach, legacy_pcib_attach), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD(device_suspend, bus_generic_suspend), DEVMETHOD(device_resume, bus_generic_resume), /* Bus interface */ DEVMETHOD(bus_read_ivar, legacy_pcib_read_ivar), DEVMETHOD(bus_write_ivar, legacy_pcib_write_ivar), DEVMETHOD(bus_alloc_resource, legacy_pcib_alloc_resource), DEVMETHOD(bus_adjust_resource, bus_generic_adjust_resource), DEVMETHOD(bus_release_resource, bus_generic_release_resource), DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), /* pcib interface */ DEVMETHOD(pcib_maxslots, legacy_pcib_maxslots), DEVMETHOD(pcib_read_config, legacy_pcib_read_config), DEVMETHOD(pcib_write_config, legacy_pcib_write_config), DEVMETHOD(pcib_route_interrupt, legacy_pcib_route_interrupt), DEVMETHOD(pcib_alloc_msi, legacy_pcib_alloc_msi), DEVMETHOD(pcib_release_msi, pcib_release_msi), DEVMETHOD(pcib_alloc_msix, legacy_pcib_alloc_msix), DEVMETHOD(pcib_release_msix, pcib_release_msix), DEVMETHOD(pcib_map_msi, legacy_pcib_map_msi), DEVMETHOD_END }; static devclass_t hostb_devclass; DEFINE_CLASS_0(pcib, legacy_pcib_driver, legacy_pcib_methods, 1); DRIVER_MODULE(pcib, legacy, legacy_pcib_driver, hostb_devclass, 0, 0); /* * Install placeholder to claim the resources owned by the * PCI bus interface. This could be used to extract the * config space registers in the extreme case where the PnP * ID is available and the PCI BIOS isn't, but for now we just * eat the PnP ID and do nothing else. * * XXX we should silence this probe, as it will generally confuse * people. */ static struct isa_pnp_id pcibus_pnp_ids[] = { { 0x030ad041 /* PNP0A03 */, "PCI Bus" }, { 0x080ad041 /* PNP0A08 */, "PCIe Bus" }, { 0 } }; static int pcibus_pnp_probe(device_t dev) { int result; if ((result = ISA_PNP_PROBE(device_get_parent(dev), dev, pcibus_pnp_ids)) <= 0) device_quiet(dev); return(result); } static int pcibus_pnp_attach(device_t dev) { return(0); } static device_method_t pcibus_pnp_methods[] = { /* Device interface */ DEVMETHOD(device_probe, pcibus_pnp_probe), DEVMETHOD(device_attach, pcibus_pnp_attach), DEVMETHOD(device_detach, bus_generic_detach), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD(device_suspend, bus_generic_suspend), DEVMETHOD(device_resume, bus_generic_resume), { 0, 0 } }; static devclass_t pcibus_pnp_devclass; DEFINE_CLASS_0(pcibus_pnp, pcibus_pnp_driver, pcibus_pnp_methods, 1); DRIVER_MODULE(pcibus_pnp, isa, pcibus_pnp_driver, pcibus_pnp_devclass, 0, 0); #ifdef __HAVE_PIR /* * Provide a PCI-PCI bridge driver for PCI busses behind PCI-PCI bridges * that appear in the PCIBIOS Interrupt Routing Table to use the routing * table for interrupt routing when possible. */ static int pcibios_pcib_probe(device_t bus); static device_method_t pcibios_pcib_pci_methods[] = { /* Device interface */ DEVMETHOD(device_probe, pcibios_pcib_probe), /* pcib interface */ DEVMETHOD(pcib_route_interrupt, legacy_pcib_route_interrupt), {0, 0} }; static devclass_t pcib_devclass; DEFINE_CLASS_1(pcib, pcibios_pcib_driver, pcibios_pcib_pci_methods, sizeof(struct pcib_softc), pcib_driver); DRIVER_MODULE(pcibios_pcib, pci, pcibios_pcib_driver, pcib_devclass, 0, 0); static int pcibios_pcib_probe(device_t dev) { int bus; if ((pci_get_class(dev) != PCIC_BRIDGE) || (pci_get_subclass(dev) != PCIS_BRIDGE_PCI)) return (ENXIO); bus = pci_read_config(dev, PCIR_SECBUS_1, 1); if (bus == 0) return (ENXIO); if (!pci_pir_probe(bus, 1)) return (ENXIO); device_set_desc(dev, "PCIBIOS PCI-PCI bridge"); return (-2000); } #endif