config root man

# $FreeBSD: release/9.1.0/tools/tools/nanobsd/gateworks/common 229884 2012-01-09 21:51:50Z thompsa $

NANO_CFGDIR=${NANO_CFGDIR:-${NANO_SRC}/${NANO_TOOLS}/gateworks/cfg}
test -d ${NANO_CFGDIR} || NANO_CFGDIR=/var/empty
NANO_PMAKE="make"					# NB: disable -j 3

NANO_ARCH=armeb
TARGET_CPUTYPE=xscale; export TARGET_CPUTYPE		# XXX

NANO_CUSTOMIZE="cust_allow_ssh_root"

clean_usr_local()
{
	LOCAL_DIR=${NANO_WORLDDIR}/usr/local
	pprint 2 "Clean and create world directory (${LOCAL_DIR})"
	if rm -rf ${LOCAL_DIR}/ > /dev/null 2>&1 ; then
		true
	else
		chflags -R noschg ${LOCAL_DIR}/
		rm -rf ${LOCAL_DIR}/
	fi
	for f in bin etc lib libdata libexec sbin share; do
		mkdir -p ${LOCAL_DIR}/$f
	done
}
NANO_CUSTOMIZE="$NANO_CUSTOMIZE clean_usr_local"

cust_install_machine_files()
{
	echo "cd ${NANO_TOOLS}/gateworks/Files"
	cd ${NANO_TOOLS}/gateworks/Files
	find . -print | grep -Ev '/(CVS|\.svn)' | cpio -dumpv ${NANO_WORLDDIR}
}
NANO_CUSTOMIZE="$NANO_CUSTOMIZE cust_install_files cust_install_machine_files"

buildenv()
{
	cd ${NANO_SRC}
	env TARGET_ARCH=${NANO_ARCH} __MAKE_CONF=${NANO_MAKE_CONF_BUILD} \
	    DESTDIR=${NANO_WORLDDIR} make buildenv
}

net80211_tools()
{
	for f in wlanstats wlanwds wlanwatch; do 
		echo "(cd tools/tools/net80211/$f; make $1)"; 
	done | buildenv
}
net80211_clean_tools()
{
	net80211_tools "clean"
}
net80211_build_tools()
{
	net80211_tools ""
}
net80211_install_tools()
{
	net80211_tools "install"
}
NANO_CUSTOMIZE="$NANO_CUSTOMIZE net80211_clean_tools"
NANO_CUSTOMIZE="$NANO_CUSTOMIZE net80211_build_tools"
NANO_CUSTOMIZE="$NANO_CUSTOMIZE net80211_install_tools"

ath_clean_tools()
{
	echo "cd tools/tools/ath; make clean" | buildenv
}
ath_build_tools()
{
	echo "cd tools/tools/ath; make" | buildenv
}
ath_install_tools()
{
	echo "cd tools/tools/ath; make install" | buildenv
}
NANO_CUSTOMIZE="$NANO_CUSTOMIZE ath_clean_tools"
NANO_CUSTOMIZE="$NANO_CUSTOMIZE ath_build_tools"
NANO_CUSTOMIZE="$NANO_CUSTOMIZE ath_install_tools"

npe_clean_tools()
{
	echo "cd tools/tools/npe; make clean" | buildenv
}
npe_build_tools()
{
	echo "cd tools/tools/npe; make" | buildenv
}
npe_install_tools()
{
	echo "cd tools/tools/npe; make install" | buildenv
}
NANO_CUSTOMIZE="$NANO_CUSTOMIZE npe_clean_tools"
NANO_CUSTOMIZE="$NANO_CUSTOMIZE npe_build_tools"
NANO_CUSTOMIZE="$NANO_CUSTOMIZE npe_install_tools"

NANO_MAKEFS="makefs -B big \
	-o bsize=4096,fsize=512,density=8192,optimization=space"
export NANO_MAKEFS

# NB: leave c++ enabled so devd can be built
CONF_BUILD="
WITHOUT_ACCT=true
WITHOUT_ACPI=true
WITHOUT_APM=true
WITHOUT_ATM=true
WITHOUT_AUDIT=true
WITHOUT_BIND_DNSSEC=true
WITHOUT_BIND_ETC=true
WITHOUT_BIND_LIBS_LWRES=true
WITHOUT_BLUETOOTH=true
WITHOUT_BSNMP=true
WITHOUT_CALENDAR=true
WITHOUT_CDDL=true
WITHOUT_CTM=true
WITHOUT_CVS=true
WITHOUT_DICT=true
WITHOUT_EXAMPLES=true
WITHOUT_FLOPPY=true
WITHOUT_FORTRAN=true
WITHOUT_GAMES=true
WITHOUT_GCOV=true
WITHOUT_GPIB=true
WITHOUT_GROFF=true
WITHOUT_HTML=true
WITHOUT_INET6=true
WITHOUT_INFO=true
WITHOUT_IPFILTER=true
WITHOUT_IPX=true
WITHOUT_KERBEROS=true
WITHOUT_LOCALES=true
WITHOUT_LPR=true
WITHOUT_MAN=true
WITHOUT_MAIL=true
WITHOUT_MAILWRAPPER=true
WITHOUT_NETCAT=true
WITHOUT_NIS=true
WITHOUT_NLS=true
WITHOUT_NS_CACHING=true
WITHOUT_OBJC=true
WITHOUT_PMC=true
WITHOUT_PORTSNAP=true
WITHOUT_PROFILE=true
WITHOUT_QUOTAS=true
WITHOUT_RCMDS=true
WITHOUT_RCS=true
WITHOUT_RESCUE=true
WITHOUT_SENDMAIL=true
WITHOUT_SHAREDOCS=true
WITHOUT_SSP=true
WITHOUT_SYSCONS=true
WITHOUT_SYSINSTALL=true
WITHOUT_TCSH=true
WITHOUT_TFTPD=true
WITHOUT_ZFS=true
"
CONF_INSTALL="$CONF_BUILD
WITHOUT_TOOLCHAIN=true
WITHOUT_INSTALLLIB=true
INSTALL_NODEBUG=true
"

# NB: override to force / on s1 instead of s1a
setup_nanobsd_etc()
{
	pprint 2 "configure nanobsd /etc"

	(
	cd ${NANO_WORLDDIR}

	# create diskless marker file
	touch etc/diskless

	# Make root filesystem R/O by default
	echo "root_rw_mount=NO" >> etc/defaults/rc.conf

	# save config file for scripts
	echo "NANO_DRIVE=${NANO_DRIVE}" > etc/nanobsd.conf

	echo "/dev/${NANO_DRIVE}s1 / ufs ro 1 1" > etc/fstab
	echo "/dev/${NANO_DRIVE}s3 /cfg ufs rw,noauto 2 2" >> etc/fstab
	mkdir -p cfg
	)
}

create_arm_diskimage()
{
	pprint 2 "build diskimage"
	pprint 3 "log: ${MAKEOBJDIRPREFIX}/_.di"

	(
	echo "NANO_MEDIASIZE:	$NANO_MEDIASIZE"
	echo "NANO_IMAGES:	$NANO_IMAGES"
	echo "NANO_SECTS:	$NANO_SECTS"
	echo "NANO_HEADS:	$NANO_HEADS"
	echo "NANO_CODESIZE:	$NANO_CODESIZE"
	echo "NANO_CONFSIZE:	$NANO_CONFSIZE"
	echo "NANO_DATASIZE:	$NANO_DATASIZE"

	echo $NANO_MEDIASIZE $NANO_IMAGES \
		$NANO_SECTS $NANO_HEADS \
		$NANO_CODESIZE $NANO_CONFSIZE $NANO_DATASIZE |
	awk '
	{
		printf "# %s\n", $0

		# size of cylinder in sectors
		cs = $3 * $4

		# number of full cylinders on media
		cyl = int ($1 / cs)

		# output fdisk geometry spec, truncate cyls to 1023
		if (cyl <= 1023)
			print "g c" cyl " h" $4 " s" $3
		else
			print "g c" 1023 " h" $4 " s" $3

		if ($7 > 0) { 
			# size of data partition in full cylinders
			dsl = int (($7 + cs - 1) / cs)
		} else {
			dsl = 0;
		}

		# size of config partition in full cylinders
		csl = int (($6 + cs - 1) / cs)

		if ($5 == 0) {
			# size of image partition(s) in full cylinders
			isl = int ((cyl - dsl - csl) / $2)
		} else {
			isl = int (($5 + cs - 1) / cs)
		}

		# First image partition start at second track
		print "p 1 165 " $3, isl * cs - $3
		c = isl * cs;

		# Second image partition (if any) also starts offset one 
		# track to keep them identical.
		if ($2 > 1) {
			print "p 2 165 " $3 + c, isl * cs - $3
			c += isl * cs;
		}

		# Config partition starts at cylinder boundary.
		print "p 3 165 " c, csl * cs
		c += csl * cs

		# Data partition (if any) starts at cylinder boundary.
		if ($7 > 0) {
			print "p 4 165 " c, dsl * cs
		} else if ($7 < 0 && $1 > c) {
			print "p 4 165 " c, $1 - c
		} else if ($1 < c) {
			print "Disk space overcommitted by", \
			    c - $1, "sectors" > "/dev/stderr"
			exit 2
		}

		# Force slice 1 to be marked active. This is necessary
		# for booting the image from a USB device to work.
		print "a 1"
	}
	' > ${MAKEOBJDIRPREFIX}/_.fdisk

	IMG=${NANO_DISKIMGDIR}/${NANO_IMGNAME}
	BS=${NANO_SECTS}b

	if [ "${NANO_MD_BACKING}" = "swap" ] ; then
		MD=`mdconfig -a -t swap -s ${NANO_MEDIASIZE} -x ${NANO_SECTS} \
			-y ${NANO_HEADS}`
	else
		echo ""; echo "Creating md backing file ${IMG} ..."
		_c=`expr ${NANO_MEDIASIZE} / ${NANO_SECTS}`
		pprint 2 "dd if=/dev/zero of=${IMG} bs=${BS} count=${_c}"
		dd if=/dev/zero of=${IMG} bs=${BS} count=${_c}
		pprint 2 "mdconfig -a -t vnode -f ${IMG} -x ${NANO_SECTS} -y ${NANO_HEADS}"
		MD=`mdconfig -a -t vnode -f ${IMG} -x ${NANO_SECTS} \
			-y ${NANO_HEADS}`
	fi

	trap "mdconfig -d -u $MD" 1 2 15 EXIT

	echo ""; echo "Write partition table ..."
	FDISK=${MAKEOBJDIRPREFIX}/_.fdisk
	pprint 2 "fdisk -i -f ${FDISK} ${MD}"
	fdisk -i -f ${FDISK} ${MD}
	pprint 2 "fdisk ${MD}"
	fdisk ${MD}

	# Create first image
	IMG1=${NANO_DISKIMGDIR}/_.disk.image1
	echo ""; echo "Create first image ${IMG1} ..."
	SIZE=`awk '/^p 1/ { print $5 "b" }' ${FDISK}`
	pprint 2 "${NANO_MAKEFS} -s ${SIZE} ${IMG1} ${NANO_WORLDDIR}"
	${NANO_MAKEFS} -s ${SIZE} ${IMG1} ${NANO_WORLDDIR}
	pprint 2 "dd if=${IMG1} of=/dev/${MD}s1 bs=${BS}"
	dd if=${IMG1} of=/dev/${MD}s1 bs=${BS}

	if [ $NANO_IMAGES -gt 1 -a $NANO_INIT_IMG2 -gt 0 ] ; then
		IMG2=${NANO_DISKIMGDIR}/_.disk.image2
		echo ""; echo "Create second image ${IMG2}..."
		for f in ${NANO_WORLDDIR}/etc/fstab ${NANO_WORLDDIR}/conf/base/etc/fstab
		do
			sed -i "" "s/${NANO_DRIVE}s1/${NANO_DRIVE}s2/g" $f
		done

		SIZE=`awk '/^p 2/ { print $5 "b" }' ${FDISK}`
		pprint 2 "${NANO_MAKEFS} -s ${SIZE} ${IMG2} ${NANO_WORLDDIR}"
		${NANO_MAKEFS} -s ${SIZE} ${IMG2} ${NANO_WORLDDIR}
		pprint 2 "dd if=${IMG2} of=/dev/${MD}s2 bs=${BS}"
		dd if=${IMG2} of=/dev/${MD}s2 bs=${BS}
	fi

	# Create Config slice
	CFG=${NANO_DISKIMGDIR}/_.disk.cfg
	echo ""; echo "Creating config partition ${CFG}..."
	SIZE=`awk '/^p 3/ { print $5 "b" }' ${FDISK}`
	# XXX: fill from where ?
	pprint 2 "${NANO_MAKEFS} -s ${SIZE} ${CFG} ${NANO_CFGDIR}"
	${NANO_MAKEFS} -s ${SIZE} ${CFG} ${NANO_CFGDIR}
	pprint 2 "dd if=${CFG} of=/dev/${MD}s3 bs=${BS}"
	dd if=${CFG} of=/dev/${MD}s3 bs=${BS}
	pprint 2 "rm ${CFG}"
	rm ${CFG}; CFG=			# NB: disable printing below

	# Create Data slice, if any.
	if [ $NANO_DATASIZE -gt 0 ] ; then
		DATA=${NANO_DISKIMGDIR}/_.disk.data
		echo ""; echo "Creating data partition ${DATA}..."
		SIZE=`awk '/^p 4/ { print $5 "b" }' ${FDISK}`
		# XXX: fill from where ?
		pprint 2 "${NANO_MAKEFS} -s ${SIZE} ${DATA} /var/empty"
		${NANO_MAKEFS} -s ${SIZE} ${DATA} /var/empty
		pprint 2 "dd if=${DATA} of=/dev/${MD}s4 bs=${BS}"
		dd if=${DATA} of=/dev/${MD}s4 bs=${BS}
		pprint 2 "rm ${DATA}"
		rm ${DATA}; DATA=	# NB: disable printing below
	fi

	if [ "${NANO_MD_BACKING}" = "swap" ] ; then
		echo "Writing out _.disk.full..."
		dd if=/dev/${MD} of=${IMG} bs=${BS}
	fi

	echo ""
	echo "Completed images in:"
	echo ""
	echo "Full disk:         ${IMG}"
	echo "Primary partition: ${IMG1}"
	test "${IMG2}" && echo "2ndary partition:  ${IMG2}"
	test "${CFG}" &&  echo "/cfg partition:    ${CFG}"
	test "${DATA}" && echo "/data partition:   ${DATA}"
	echo ""
	echo "Use dd if=<file> of=/dev/<somewhere> bs=${BS} to transfer an"
	echo "image to bootable media /dev/<somewhere>."
	) > ${MAKEOBJDIRPREFIX}/_.di 2>&1
}