config root man

# Test need anonymous user when connection are made as "zedjzlcsjhd"
source include/add_anonymous_users.inc;

# Clean up old slave's binlogs.
# The slave is started with --log-slave-updates
# and this test does SHOW BINLOG EVENTS on the slave's
# binlog. But previous tests can influence the current test's
# binlog (e.g. a temporary table in the previous test has not
# been explicitly deleted, or it has but the slave hasn't had
# enough time to catch it before STOP SLAVE,
# and at the beginning of the current
# test the slave immediately writes DROP TEMPORARY TABLE this_old_table).
# We wait for the slave to have written all he wants to the binlog
# (otherwise RESET MASTER may come too early).
save_master_pos;
connection slave;

# Add suppression for expected warning(s) in slaves error log
call mtr.add_suppression("Slave: Can\'t find record in \'user\' Error_code: 1032");

sync_with_master;
reset master;

# ##################################################################
# BUG#41725: slave crashes when inserting into temporary table after
#            stop/start slave
#
#  This test checks that both reported issues (assertion failure and
#  crash) go away. It is implemented as follows:
#
#    case 1: assertion failure
#      i) create and insert into temporary table on master
#     ii) sync slave with master
#    iii) stop and restart slave
#     iv) insert into master another value
#      v) sync slave with master
#
#
#    case 2: crash (SIGSEV)
#      i) create and insert into temporary table on master (insert
#         produces warnings)
#     ii) sync slave with master
#    iii) stop and restart slave
#     iv) insert into master more values
#      v) sync slave with master

# case 1: Assertion in Field_string::store() failed because current
#         thread reference differed from table->in_use after slave
#         restart

connection master;

--disable_query_log ONCE
CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");

disable_warnings ONCE;
DROP TABLE IF EXISTS t1;
enable_warnings;

CREATE TEMPORARY TABLE t1 (a char(1));
INSERT INTO t1 VALUES ('a');
sync_slave_with_master;

# Temporary table t1 open when stop slave is done. So we will have a warning here.
# But this warning is NOT generated in RBR. So the results will be different in
# SBR and RBR if we dont disable warnings here.
--disable_warnings
source include/stop_slave.inc;
--enable_warnings

source include/start_slave.inc;

connection master;
INSERT INTO t1 VALUES ('b');
sync_slave_with_master;

# case 2: crash on sp_rcontext::find_handler because it used
#         reference to invalid THD object after slave restart

connection master;

disable_warnings ONCE;
DROP TABLE IF EXISTS t1;
enable_warnings;
CREATE TEMPORARY TABLE `t1`(`a` tinyint,`b` char(1))engine=myisam;
INSERT INTO `t1` set `a`=128,`b`='128';

sync_slave_with_master;

# Temporary table `t1` open when stop slave is done. So we will have a warning here.
# But this warning is NOT generated in RBR. So the results will be different in
# SBR and RBR if we dont disable warnings here.
--disable_warnings
source include/stop_slave.inc;
--enable_warnings

source include/start_slave.inc;

connection master;
INSERT INTO `t1` set `a`=128,`b`='128';
sync_slave_with_master;

# cleanup

connection master;
DROP TABLE t1;
sync_slave_with_master;

connection master;

connect (con1,localhost,root,,);
connect (con2,localhost,root,,);
# We want to connect as an unprivileged user. But if we use user="" then this
# will pick the Unix login, which will cause problems if you're running the test
# as root.
connect (con3,localhost,zedjzlcsjhd,,);

# We are going to use SET PSEUDO_THREAD_ID in this test;
# check that it requires the SUPER privilege.

connection con3;
SET @save_select_limit=@@session.sql_select_limit;
--error 1227
SET @@session.sql_select_limit=10, @@session.pseudo_thread_id=100;
SELECT @@session.sql_select_limit = @save_select_limit; #shouldn't have changed
# While we are here we also test that SQL_LOG_BIN can't be set
--error 1227
SET @@session.sql_select_limit=10, @@session.sql_log_bin=0;
SELECT @@session.sql_select_limit = @save_select_limit; #shouldn't have changed
# Now as root, to be sure it works
connection con2;
SET @save_conn_id= connection_id();
SET @@session.pseudo_thread_id=100;
SET @@session.pseudo_thread_id=connection_id();
SET @@session.pseudo_thread_id=@save_conn_id;
SET @@session.sql_log_bin=0;
SET @@session.sql_log_bin=1;

connection con3;
let $VERSION=`select version()`;

--disable_warnings ONCE
drop table if exists t1,t2;

create table t1(f int);
create table t2(f int);
insert into t1 values (1),(2),(3),(4),(5),(6),(7),(8),(9),(10);
# Auxiliary select (We want that all rows are in the table)
SELECT COUNT(*) FROM t1;

connection con1;
create temporary table t3(f int);
--disable_warnings ONCE
insert into t3 select * from t1 where f<6;
let $wait_condition= SELECT COUNT(*) = 5 FROM t3;
--source include/wait_condition_or_abort.inc

connection con2;
create temporary table t3(f int);

connection con1;
--disable_warnings ONCE
insert into t2 select count(*) from t3;
let $wait_condition= SELECT COUNT(*) = 1 FROM t2;
--source include/wait_condition_or_abort.inc

connection con2;
--disable_warnings ONCE
insert into t3 select * from t1 where f>=4;
let $wait_condition= SELECT COUNT(*) = 7 FROM t3;
--source include/wait_condition_or_abort.inc

connection con1;
drop temporary table t3;

connection con2;
--disable_warnings ONCE
insert into t2 select count(*) from t3;
drop temporary table t3;

select * from t2 ORDER BY f;

# Commented out 8/30/2005 to make compatable with both sbr and rbr
#--replace_result $VERSION VERSION
#--replace_column 2 # 5 #
#show binlog events;

drop table t1, t2;

use test;
SET TIMESTAMP=1040323920;
create table t1(f int);
SET TIMESTAMP=1040323931;
create table t2(f int);
SET TIMESTAMP=1040323938;
insert into t1 values (1),(2),(3),(4),(5),(6),(7),(8),(9),(10);

SET TIMESTAMP=1040323945;
SET @@session.pseudo_thread_id=1;
create temporary table t3(f int);
SET TIMESTAMP=1040323952;
SET @@session.pseudo_thread_id=1;
--disable_warnings ONCE
insert into t3 select * from t1 where f<6;
SET TIMESTAMP=1040324145;
SET @@session.pseudo_thread_id=2;
create temporary table t3(f int);
SET TIMESTAMP=1040324186;
SET @@session.pseudo_thread_id=1;
--disable_warnings ONCE
insert into t2 select count(*) from t3;
SET TIMESTAMP=1040324200;
SET @@session.pseudo_thread_id=2;
--disable_warnings ONCE
insert into t3 select * from t1 where f>=4;
SET TIMESTAMP=1040324211;
SET @@session.pseudo_thread_id=1;
drop temporary table t3;
SET TIMESTAMP=1040324219;
SET @@session.pseudo_thread_id=2;
--disable_warnings ONCE
insert into t2 select count(*) from t3;
SET TIMESTAMP=1040324224;
SET @@session.pseudo_thread_id=2;
drop temporary table t3;

select * from t2 ORDER BY f;
drop table t1,t2;

# Create last a temporary table that is not dropped at end to ensure that we
# don't get any memory leaks for this

create temporary table t3 (f int);
sync_slave_with_master;

# The server will now close done

#
# Bug#17284 erroneous temp table cleanup on slave
# The test targets at verifying that reconnected slave
# retained the former session's temporary tables
#
connection master;
create temporary table t4 (f int);
create table t5 (f int);
sync_slave_with_master;
# connection slave

# Temporary table t3,t4 are open when stop slave is done. So we will have a warning here.
# But this warning is NOT generated in RBR. So the results will be different in
# SBR and RBR if we dont disable warnings here.
--disable_warnings
stop slave;  # to prepare for reconnecting w/o waiting for timeout
--enable_warnings

connection master;
--disable_warnings ONCE
insert into t5 select * from t4;
save_master_pos;

connection slave;
start slave;
sync_with_master;
select * from t5 /* must be 1 after reconnection */;

connection master;
drop temporary table t4;
drop table t5;

#
# BUG#17263 incorrect generation DROP temp tables
# Temporary tables of connection are dropped in batches
# where a batch correspond to pseudo_thread_id
# value was set up at the moment of temp table creation
#
connection con1;
set @@session.pseudo_thread_id=100;
create temporary table t101 (id int);
create temporary table t102 (id int);
set @@session.pseudo_thread_id=200;
create temporary table t201 (id int);
create temporary table `t``201` (id int);
# emulate internal temp table not to come to binlog
create temporary table `#sql_not_user_table202` (id int);
set @@session.pseudo_thread_id=300;
create temporary table t301 (id int);
create temporary table t302 (id int);
create temporary table `#sql_not_user_table303` (id int);
disconnect con1;

#now do something to show that slave is ok after DROP temp tables
connection master;
create table t1(f int);
insert into t1 values (1);

sync_slave_with_master;
#connection slave;
select * from t1 /* must be 1 */;

connection master;
drop table t1;

#
#14157: utf8 encoding in binlog without set character_set_client
#
--write_file $MYSQLTEST_VARDIR/tmp/bug14157.sql
create table t1 (a int);
set names latin1;
create temporary table `\E4\F6\FC\C4\D6\DC` (a int);
insert into `\E4\F6\FC\C4\D6\DC` values (1);
insert into t1 select * from `\E4\F6\FC\C4\D6\DC`
EOF
--exec $MYSQL --character-sets-dir=../sql/share/charsets/ --default-character-set=latin1 test < $MYSQLTEST_VARDIR/tmp/bug14157.sql

sync_slave_with_master;
#connection slave;
select * from t1;

connection master;
drop table t1;
--remove_file $MYSQLTEST_VARDIR/tmp/bug14157.sql
--sync_slave_with_master

# Delete the anonymous users.

# Temporary table `\E4\F6\FC\C4\D6\DC` open when stop slave is done. So we will have a warning here.
# But this warning is NOT generated in RBR. So the results will be different in
# SBR and RBR if we dont disable warnings here.
--disable_warnings
--source include/stop_slave.inc
--enable_warnings

source include/delete_anonymous_users.inc;
--connection master
source include/delete_anonymous_users.inc;
--let $rpl_only_running_threads= 1
--source include/rpl_reset.inc


#
# Bug#43748: crash when non-super user tries to kill the replication threads
#

--echo -- Bug#43748

--echo -- make a user on the slave that can list but not kill system threads.
connection slave;

FLUSH PRIVILEGES;
GRANT USAGE   ON *.* TO user43748@127.0.0.1 IDENTIFIED BY 'meow';
GRANT PROCESS ON *.* TO user43748@127.0.0.1;

--echo -- try to KILL system-thread as that non-privileged user (on slave).
connect (cont43748,127.0.0.1,user43748,meow,test,$SLAVE_MYPORT,);
connection cont43748;

SELECT id INTO @id FROM information_schema.processlist WHERE user='system user' LIMIT 1;

--error ER_KILL_DENIED_ERROR,ER_NO_SUCH_THREAD
KILL @id;

disconnect cont43748;

--echo -- throw out test-user on slave.
connection slave;

DROP USER user43748@127.0.0.1;