config root man

# The include statement below is a temp one for tests that are yet to
#be ported to run with InnoDB,
#but needs to be kept for tests that would need MyISAM in future.
--source include/force_myisam_default.inc

###############################################
# Purpose: To test advance DD and replication #
###############################################

#### Include Section ####
--source include/have_ndb.inc
--source include/have_binlog_format_mixed_or_row.inc
--source include/not_embedded.inc
--source suite/ndb_rpl/ndb_master-slave.inc

######################################################
# Requirment: Cluster DD and replication must be able#
# to handle ALTER tables and indexes and must rpl    #
# to the slave correctly                             #
######################################################

##  Test #1 replication of CDD and Alter Tables #####
--echo ***** Test 1 RPL of CDD and Alter *****
--echo ***** Test 1 setup *****

CREATE LOGFILE GROUP lg1
ADD UNDOFILE 'undofile.dat'
INITIAL_SIZE 16M
UNDO_BUFFER_SIZE = 1M
ENGINE=NDB;

ALTER LOGFILE GROUP lg1
ADD UNDOFILE 'undofile02.dat'
INITIAL_SIZE 4M 
ENGINE=NDB;

CREATE TABLESPACE ts1
ADD DATAFILE 'datafile.dat'
USE LOGFILE GROUP lg1
INITIAL_SIZE 24M
ENGINE=NDB;

ALTER TABLESPACE ts1
ADD DATAFILE 'datafile02.dat'
INITIAL_SIZE 8M 
ENGINE=NDB;

CREATE TABLE t1
  (c1 INT NOT NULL PRIMARY KEY, 
   c2 INT NOT NULL, 
   c3 INT NOT NULL)
   TABLESPACE ts1 STORAGE DISK
   ENGINE=NDB;

--echo ***** insert some data *****

let $j= 900;
--disable_query_log
while ($j)
{
  eval INSERT INTO t1 VALUES($j,$j*2,$j+3);
  dec $j;
}
--enable_query_log

--echo ***** Select from Master *****

SELECT * FROM t1 ORDER BY c1 LIMIT 5;

--echo ***** Select from Slave *****
--sync_slave_with_master
connection slave;
SELECT * FROM t1 ORDER BY c1 LIMIT 5;

###################################
# Just to some File Schema check  #
###################################

--disable_query_log
SELECT DISTINCT FILE_NAME, FILE_TYPE, TABLESPACE_NAME, LOGFILE_GROUP_NAME   
       FROM INFORMATION_SCHEMA.FILES
       WHERE ENGINE="ndbcluster" ORDER BY FILE_NAME;
--enable_query_log

--echo **** Do First Set of ALTERs in the master table ****
###################################################
# On this first set of alters I expect: 
# 1. To be able to create and index on 2 columns
# 2. To be able to create a unique index
# 3. To be able to add two columns and have
# it all replicated correctly to the slave cluster.
###################################################
connection master;
CREATE INDEX t1_i ON t1(c2, c3);
#Bug 18039
CREATE UNIQUE INDEX t1_i2 ON t1(c2);
ALTER TABLE t1 ADD c4 TIMESTAMP;
# Save the TIMESTAMP value of c4 for later masking of .result file
let $c4_timestamp_value=`select c4 FROM t1 WHERE c1 = 1`;
ALTER TABLE t1 ADD c5 DOUBLE;
ALTER TABLE t1 ADD INDEX (c5);  
SHOW CREATE TABLE t1;

--echo **** Show first set of ALTERs on SLAVE ****
--sync_slave_with_master
connection slave;
SHOW CREATE TABLE t1;

--echo **** Second set of alters test 1 ****
############################################
# With this next set of alters we have had
# Some issues with renames of tables. So this
# test renames our main table, drop and index off
# of it, creates another table with then name
# of the orginal table, inserts a row, drops 
# the table and renames the orginal table back.
# I want to make sure that 1) the cluster does
# okay with this and 2) that it is replicated 
# correctly.
#############################################
connection master;
ALTER TABLE t1 RENAME t2;
ALTER TABLE t2 DROP INDEX c5;
CREATE TABLE t1(c1 INT)ENGINE=NDB;
INSERT INTO t1 VALUES(1);
DROP TABLE t1;
ALTER TABLE t2 RENAME t1;

--echo **** Show second set of ALTERs on MASTER ****

SHOW CREATE TABLE t1;

--echo **** Show second set of ALTERs on SLAVE ****
--sync_slave_with_master
connection slave;
SHOW CREATE TABLE t1;

--echo **** Third and last set of alters for test1  ****
#########################################################
# In this last set of alters, we are messing with the 
# cluster ability to rebuild indexes, drop a column that make up
# an index with another column and change types several times in
# a row. I have choosen the BLOB as it seems to have had many
# issues in this release. I want to make sure that the cluster
# deals with these radical changes and that the replication to
# the slave cluster is dones correctly. 
###########################################################
connection master;
ALTER TABLE t1 CHANGE c1 c1 DOUBLE;
ALTER TABLE t1 CHANGE c2 c2 DECIMAL(10,2);
ALTER TABLE t1 DROP COLUMN c3;
ALTER TABLE t1 CHANGE c4 c4 TEXT CHARACTER SET utf8;
ALTER TABLE t1 CHANGE c4 c4 BLOB;
ALTER TABLE t1 CHANGE c4 c3 BLOB;
set @b1 = 'b1';
set @b1 = concat(@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1);
UPDATE t1 SET c3=@b1 where c1 = 1;
UPDATE t1 SET c3=@b1 where c1 = 2;
 
--echo **** Show last set of ALTERs on MASTER ****

SHOW CREATE TABLE t1;
--replace_result $c4_timestamp_value <c4_timestamp_value>
SELECT * FROM t1 ORDER BY c1 LIMIT 5;

--echo **** Show last set of ALTERs on SLAVE ****
--sync_slave_with_master
connection slave;
SHOW CREATE TABLE t1;
--replace_result $c4_timestamp_value <c4_timestamp_value>
# Bug 18094
SELECT * FROM t1 ORDER BY c1 LIMIT 5;
SELECT * FROM t1 where c1 = 1;

connection master;
DROP TABLE t1;
--sync_slave_with_master
connection slave;
STOP SLAVE;
RESET SLAVE;
connection master;
RESET MASTER;
connection slave;
START SLAVE;

################### TEST 2 TPCB for disk data ###########################
# Requirement: To have Stored Procedures and Functions that are used to #
# populate and post transactions to the data base using CDD that span   #
# 2 tables spaces and also use a memory only cluster tables. In addition#
# The slave is to be stopped, cleaned and restored and synced with the  #
# Master cluster                                                        #
#########################################################################

--echo ******** Create additional TABLESPACE test 2 **************

connection master;
CREATE TABLESPACE ts2
ADD DATAFILE 'datafile03.dat'
USE LOGFILE GROUP lg1
INITIAL_SIZE 28M
ENGINE=NDB;

ALTER TABLESPACE ts2
ADD DATAFILE 'datafile04.dat'
INITIAL_SIZE 18M
ENGINE=NDB;

let engine_type=NDBCLUSTER;
let table_space=ts2;
let format='RBR';

--source include/tpcb_disk_data.inc

--echo ****** TEST 2 test time *********************************
USE tpcb;

--echo *********** Load up the database ******************
CALL tpcb.load();

--echo ********** Check load master and slave **************
SELECT COUNT(*) FROM account;
--sync_slave_with_master
connection slave;
USE tpcb;
SELECT COUNT(*) FROM account;

--echo ******** Run in some transactions ***************

connection master;
let $j= 100;
--disable_query_log
while ($j)
{
  eval CALL tpcb.trans($format);
  dec $j;
}
--enable_query_log


--echo ***** Time to try slave sync ***********
--echo **** Must make sure slave is clean *****
--connection slave
STOP SLAVE;
RESET SLAVE;
DROP PROCEDURE IF EXISTS tpcb.load;
DROP PROCEDURE IF EXISTS tpcb.trans;
DROP TABLE IF EXISTS tpcb.account;
DROP TABLE IF EXISTS tpcb.teller;
DROP TABLE IF EXISTS tpcb.branch;
DROP TABLE IF EXISTS tpcb.history;
DROP DATABASE tpcb;

ALTER TABLESPACE ts1
DROP DATAFILE 'datafile.dat'
ENGINE=NDB;

ALTER TABLESPACE ts1
DROP DATAFILE 'datafile02.dat'
ENGINE=NDB;

DROP TABLESPACE ts1 ENGINE=NDB;

ALTER TABLESPACE ts2
DROP DATAFILE 'datafile03.dat'
ENGINE=NDB;

ALTER TABLESPACE ts2
DROP DATAFILE 'datafile04.dat'
ENGINE=NDB;

DROP TABLESPACE ts2 ENGINE=NDB;

DROP LOGFILE GROUP lg1 ENGINE=NDB;

--echo ********** Take a backup of the Master *************
connection master;

SELECT COUNT(*) FROM history;

let $j= 100;
--disable_query_log
while ($j)
{
  eval CALL tpcb.trans($format);
  dec $j;
}
--enable_query_log

SELECT COUNT(*) FROM history;

--source include/ndb_backup.inc

--echo ************ Restore the slave ************************
connection slave;
CREATE DATABASE tpcb;
--source include/ndb_restore_slave_eoption.inc

--echo ***** Check a few slave restore values ***************
connection slave;
USE tpcb;
SELECT COUNT(*) FROM account;

--echo ***** Add some more records to master *********
connection master;
let $j= 100;
--disable_query_log
while ($j)
{
  eval CALL tpcb.trans($format);
  dec $j;
}
--enable_query_log

#
# now setup replication to continue from last epoch
# 1. get apply_status epoch from slave
# 2. get corresponding _next_ binlog postition from master
# 3. change master on slave
# 4. add some transaction for slave to process
# 5. start the replication

--echo ***** Finsh the slave sync process *******
--disable_query_log
# 1. 2. 3.
--source include/ndb_setup_slave.inc
--enable_query_log

# 4.
--echo * 4. *
connection master;
let $j= 100;
--disable_query_log
while ($j)
{
  eval CALL tpcb.trans($format);
  dec $j;
}
--enable_query_log

# 5.
--echo * 5. *
connection slave;
START SLAVE;

--echo **** We should be ready to continue on *************

connection master;
--echo ****** Let's make sure we match *******
--echo ***** MASTER *******
USE tpcb;
SELECT COUNT(*) FROM history;

--echo ****** SLAVE ********
--sync_slave_with_master
connection slave;
USE tpcb;
SELECT COUNT(*) FROM history;

--echo *** DUMP MASTER & SLAVE FOR COMPARE ********

--exec $MYSQL_DUMP --no-tablespaces --compact --order-by-primary --skip-extended-insert tpcb account teller branch history > $MYSQLTEST_VARDIR/tmp/RPL_DD_ADV_M.sql

--exec $MYSQL_DUMP_SLAVE --no-tablespaces --compact --order-by-primary --skip-extended-insert tpcb account teller branch history > $MYSQLTEST_VARDIR/tmp/RPL_DD_ADV_S.sql

--echo *************** TEST 2 CLEANUP SECTION ********************
connection master;
DROP PROCEDURE IF EXISTS tpcb.load;
DROP PROCEDURE IF EXISTS tpcb.trans;
DROP TABLE tpcb.account;
DROP TABLE tpcb.teller;
DROP TABLE tpcb.branch;
DROP TABLE tpcb.history;
DROP DATABASE tpcb;

ALTER TABLESPACE ts1
DROP DATAFILE 'datafile.dat'
ENGINE=NDB;

ALTER TABLESPACE ts1
DROP DATAFILE 'datafile02.dat'
ENGINE=NDB;

DROP TABLESPACE ts1 ENGINE=NDB;

ALTER TABLESPACE ts2
DROP DATAFILE 'datafile03.dat'
ENGINE=NDB;

ALTER TABLESPACE ts2
DROP DATAFILE 'datafile04.dat'
ENGINE=NDB;

DROP TABLESPACE ts2 ENGINE=NDB;

DROP LOGFILE GROUP lg1 ENGINE=NDB;

--sync_slave_with_master

connection master;

--echo ****** Do dumps compare ************

diff_files $MYSQLTEST_VARDIR/tmp/RPL_DD_ADV_M.sql $MYSQLTEST_VARDIR/tmp/RPL_DD_ADV_S.sql;

## Note: Ths files should only get removed, if the above diff succeeds.

--remove_file $MYSQLTEST_VARDIR/tmp/RPL_DD_ADV_M.sql
--remove_file $MYSQLTEST_VARDIR/tmp/RPL_DD_ADV_S.sql

# End 5.1 test case
--source include/rpl_end.inc